Cementitious-based adhesive mortar in powder form for breeze-block walls. Porocol is an off-white coloured powder made up of cement, fine graded sand, synthetic resins and special additives. When…
Cementitious-based adhesive mortar in powder form for breeze-block walls.…
One-component primer for polyurethane sealants for absorbent substrates. Technical data: Application of sealant: after 60 minutes. Colour: transparent straw yellow. Consumption: 6-9 g/m (1 cm - deep…
One-component primer for polyurethane sealants for absorbent substrates.…
Primer B50 is a solvent-based, low-viscosity, bituminous primer which is highly penetrative on absorbent substrates and helps improve adhesion of bituminous waterproofing membranes and sealants.…
Primer B50 is a solvent-based, low-viscosity, bituminous primer which is highly…
Two-component solvent-free epoxy primer to be used as an adhesion promoter for products from the Mapefloor range and to consolidate and waterproof cementitious substrates. Where to use: -…
Two-component solvent-free epoxy primer to be used as an adhesion promoter for…
Synthetic resin-based primer in solvent solution to improve the adhesion of liquid elastic membranes (from the Aquaflex Roof line) onto existing bituminous membranes
Synthetic resin-based primer in solvent solution to improve the adhesion of…
One-component, ultra-fluid polyurethane resin applied by injection for waterproofing structures and ground and rocks subject to intense percolating water. The reaction time may be regulated.…
One-component, ultra-fluid polyurethane resin applied by injection for…
Very fluid expanding cementitious binder for the preparation of injection slurries, mortars and concrete. Use Stabilcem to prepare shrinkage-compensated injection slurries, mortars and concrete.…
Very fluid expanding cementitious binder for the preparation of injection…