Trowelable ready-to-use one-component fibre reinforced elastomeric undercoat with high filling properties and admixed with fine sand. Trowelable intermediate filling undercoat to be used as it is during the Elastocolor cycle. Elastocolor Rasante SF is especially suitable to be used to install a reinforcing mesh, such as Elastocolor Net, and improves the smoothness of the substrate and flexibility of Elastocolor Paint finishing. Elastocolor Rasante SF is an elastomeric intermediate undercoat with high filling properties and leaves a rustic finish. It levels uneven parts of the substrate before painting with elastomeric Elastocolor Paint. Elastocolor Rasante SF can also be used as a flexible filling finish such as a quartz based paint if applied neat or diluted 5-10% with water with a trowel, cell-like sponge roller or short-hair roller. The product is ready-to-use and is applied with a metal trowel. The product may also be applied with a brush or roller. To obtain different textured "orange peel" effects, Elastocolor Rasante SF should be applied with a cell-like sponge roller either neat or diluted 5 to 10% with water, depending on the desired effect. If more coats are needed, wait at least 24 hours between coats. Elastocolor Rasante SF meets the requirements of EN 1504-2 standards, coating (C), in compliance with PI-MC?and IR?principles for concrete protection.
Consumption - trowel: from 700 to 800 g/m2 per coat; - roller or brush: from 300 to 500 g/m2 per coat; - spray: 0.8-1 kg/m2 per coat. The consumption is purely indicative, it depends on the roughness of the surface and type of application.
Technical data sheet
Keep in touch
