Project detail


"Yard"	Complexe Courcellor II
"Location"	Levallois-Perret, France
"Subcategory"	MALL
"Application"	réparation des fissures et bétons, ragréage mural et finition des bétons, renforcement structural, le scellement d’éléments, imperméabilisation et blocage d’infiltrations d’eau, ragréage de sol et rattrapage de niveaux
"Start and finish date"	2011/2012
"Application Type"	Installation of floor and wall coverings
"Owner"	Semalrep, Nexity
"Architects"	Calq Architecture, Epstein et Glaiman, Recevki Architecture
"MAPEI Distributor"	Triomat
"Credits"	Stéphane Lévy, JM Giraudeaux

CARBOPLATE

Pultruded carbon fibre plate with a protective plastic film on both faces. TECHNICAL DATA: Modulus of elasticity: 170 - 200 - 250 GPa. Fibre content: 68% - 68% - 65%. Thickness: 1.4 mm. Width: 50,…

Pultruded carbon fibre plate with a protective plastic film on both faces.…

Two-component, super-fluid epoxy resin for injections and anchorings. TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 4 : 1. Pot life of mix: 40 minutes (at +23°C). Classification: EN 1504-5 and EN…

Two-component, super-fluid epoxy resin for injections and anchorings. TECHNICAL…

EPORIP (에포립)

Two-component, solvent-free epoxy adhesive for monolithic sealing cracked screeds. TECHNICAL DATA: Consistency: comp. A: fluid paste; comp. B: fluid paste. Colours: comp. A: black; comp. B: white.…

Two-component, solvent-free epoxy adhesive for monolithic sealing cracked…

IDROSILEX PRONTO (이드로실렉스 프론토)

Osmotic cementitious mortar suitable for contact with drinking water for waterproofing masonry and concrete structures. TECHNICAL DATA: Consistency: powder. Pot life of mix: approximately 1 hour.…

Osmotic cementitious mortar suitable for contact with drinking water for…

LAMPOSILEX

Ultra quick-setting and hardening hydraulic binder for blocking seeping water. TECHNICAL DATA: Consistency: fine powder. Workability time at +20°C: approximately 1 minute. Storage: 12 months. Mixing…

Ultra quick-setting and hardening hydraulic binder for blocking seeping water.…

MAPECEM PRONTO (마페쳄 프론토)

Pre-blended, ready-to-use, quick-setting and drying (24 hours), controlled-shrinkage mortar for screeds. TECHNICAL DATA: Mixing ratio: 1 25 kg bags of MAPECEM PRONTO with approximately 2.2 litres of…

Pre-blended, ready-to-use, quick-setting and drying (24 hours),…

MAPEGROUT T60 (마페그라우트 T60)

Fibre-reinforced, sulphate-resistant thixotropic mortar for repairing concrete. TECHNICAL DATA: Maximum dimension of aggregate: 2.5 mm. Mixing ratio: 100 parts of MAPEGROUT T60 with 16.5-17.5 parts…

Fibre-reinforced, sulphate-resistant thixotropic mortar for repairing concrete.…

MAPEWRAP 11

Two-component, normal-setting, thixotropic epoxy grout for evening out concrete surfaces and for structural bonding. TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 3 : 1. Workability time: 35…

Two-component, normal-setting, thixotropic epoxy grout for evening out concrete…

MAPEWRAP 31

Two-component, medium-viscosity epoxy adhesive for impregnating MAPEWRAP using the “dry system”. TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 4 : 1. Workability time: 40 minutes (at +23°C). Bond…

Two-component, medium-viscosity epoxy adhesive for impregnating MAPEWRAP using…

MAPEWRAP C UNI-AX

High-strength, unidirectional carbon fibre fabric with a high modulus of elasticity. TECHNICAL DATA: Weight: 300-600 g/m². Equivalent thickness of dry fabric: 0.164-0.331 mm. Tensile strength: ≥…

High-strength, unidirectional carbon fibre fabric with a high modulus of…

MAPEWRAP PRIMER 1

Two-component epoxy primer specifically formulated for the MAPEWRAP system. TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 3 : 1. Workability time: 90 minutes (at +23°C). Bond strength to…

Two-component epoxy primer specifically formulated for the MAPEWRAP system.…

PLANITOP 400 (플래니탑 400)

Quick-setting, controlled-shrinkage thixotropic mortar for repairing the surface of concrete, may be applied in various thicknesses from 1 to 40 mm in a single layer. TECHNICAL DATA: Maximum…

Quick-setting, controlled-shrinkage thixotropic mortar for repairing the…

Primer G(프라이머 G)

Primer G 프라이머 G 휘발성 유기 화합물(VOC)이 매우 낮은 합성수지 성분의 수용성 프라이머 용도 ● 세라믹 타일을 고정하기 전 석고 표면의 처리 작업에 사용 ● 석고 기반의 스프레이 플라스터용 고정 코팅제로 사용 ● 시멘트/석고/아스팔트/세라믹/대리석 표면과 평활용 몰탈의 접착력 증대시 ● 시멘트계 또는 석고 표면에 균일한 흡수성 제공 ●…

Primer G 프라이머 G 휘발성 유기 화합물(VOC)이 매우 낮은 합성수지 성분의 수용성 프라이머 용도 ● 세라믹 타일을 고정하기 전 석고…

ULTRAPLAN MAXI (울트라플랜 맥시)

3 ~ 30 mm 두께용 초속건/초속경 자동 수평몰탈 용도 -하중과 통행량이 많아 저항성이 요구되는 모든 종류의 바닥 -실내전용 -타일 시공된 바닥면, 난방 장치 위의 자동 수평화 기술데이터 : 가사시간 약 30~40분, 경화시간 약 50~70분, 경보행 가능 경화 시간 약 3시간후. 약 1~3 일 이후, 후 작업 가능. 표준 사용량 : 두께 ( mm…

3 ~ 30 mm 두께용 초속건/초속경 자동 수평몰탈 용도 -하중과 통행량이 많아 저항성이 요구되는 모든 종류의 바닥 -실내전용 -타일 시공된…

ULTRATOP (울트라탑)

5~40 mm 두께용 초속경 자동수평몰탈 용도 Ultratop은 공공 건물 및 산업용 건물 내부에 이미 타설되어있는 콘크리트나 신설 콘크리트 또는 세라믹 하지면을 5-40mm두께로 수평화하여 보행 통행이 많은 장소에 적합하도록 만들어줍니다.(쇼핑 센터, 사무실, 매장, 쇼룸 및 고무 타이어 장착 차량이 운행되는 구역)울트라탑은 기계적 강도 및 내마모성이…

5~40 mm 두께용 초속경 자동수평몰탈 용도 Ultratop은 공공 건물 및 산업용 건물 내부에 이미 타설되어있는 콘크리트나 신설 콘크리트…