Project Private House in Jurmala, Jurmala

Private House in Jurmala

Jurmala, Latvia

Ref #: 4402

Category: RESIDENTIAL

Construction


Yard	Swimming-pool covering
Location	Jurmala, Latvia
Subcategory	HOUSE
Built in	2005
Opened in	2006
Application	Mosaic installation
Application Type	Floor/wall covering
Contractor company	Viki NS Ltd
MAPEI Distributor	Velve M.S. Tehnologijas Ltd

Product used for the project

ISOLASTIC

Elasticising latex mixed with KERABOND, KERABOND T and ADESILEX P10. When KERABOND, KERABOND T and KERABOND PLUS are mixed with ISOLASTIC they form a high-performance, highly deformable adhesive with…

Elasticising latex mixed with KERABOND, KERABOND T and ADESILEX P10. When…

KERAPOXY

Two-component, high-performance, anti-acid epoxy mortar and adhesive with no vertical slip for laying and grouting ceramic tiles and stone material (minimum width of joints 3 mm). TECHNICAL DATA: Pot…

Two-component, high-performance, anti-acid epoxy mortar and adhesive with no…

MAPEBAND

Alkali-resistant rubber tape with felt for cementitious waterproofing systems and liquid sheaths. TECHNICAL DATA: In service temperature range: from -30°C to +60°C. Packaging: – 120 mmx50 m rolls; –…

Alkali-resistant rubber tape with felt for cementitious waterproofing systems…

MAPELASTIC

Two-component, flexible cementitious mortar for waterproofing balconies, terraces, bathrooms and swimming pools.

Two-component, flexible cementitious mortar for waterproofing balconies,…

NIVOPLAN

Smoothing mortar for internal and external walls and ceilings for thicknesses from 2 to 20 mm. TECHNICAL DATA: Where to use: on walls for ceramic and natural stone coatings. Workability time: 2-3…

Smoothing mortar for internal and external walls and ceilings for thicknesses…

PLANICRETE

Synthetic rubber latex to improve adhesion of cement mixes. TECHNICAL DATA: Consistency: fluid liquid. Dry solids content: 36%. Storage: 24 months. Consumption: – for adhesive slurry: 100-150 g/m²; –…

Synthetic rubber latex to improve adhesion of cement mixes. TECHNICAL DATA:…

PRIMER G

Synthetic resin primer in water dispersion with a very low content of volatile organic compounds (VOC). TECHNICAL DATA: Consistency: liquid. Colour: blue. Dilution rate: from 1:1 to 1: 3 with water…

Synthetic resin primer in water dispersion with a very low content of volatile…