Cementitious & Resin Floor

The products from this line enable you to create floors of the highest technical and aesthetic quality for a vast range of uses. In fact, numerous settings can benefit from innovative flooring resistant to abrasion, impact loads, cracking and aggressive chemical agents.

NOVOTOP 80K

Mapefloor I 300 SL KR

MAPEFLOOR CPU/MF

Three-component, self-levelling polyurethane-cement mortar with high resistance to chemicals for industrial floors, applied in thicknesses 3 to 6 mm. Complies with standards applied in the foodstuffs…

Three-component, self-levelling polyurethane-cement mortar with high resistance…

ULTRATOP

Self-levelling, ultra-quick hardening mortar with special hydraulic binders, applied at a thickness between 5 and 40 mm to create abrasion-resistant floors. TECHNICAL DATA: Colour: white, beige,…

Self-levelling, ultra-quick hardening mortar with special hydraulic binders,…

ULTRAPLAN MAXI

Self-levelling, ultra quick-hardening smoothing compound for thicknesses from 3 to 40 mm. TECHNICAL DATA: Where to use: internal floors for ceramic, natural stone, resilient and wooden coatings.…

Self-levelling, ultra quick-hardening smoothing compound for thicknesses from 3…

ULTRAPLAN

Self-levelling, ultra quick-hardening smoothing compound for thicknesses from 1 to 10 mm. TECHNICAL DATA: Where to use: internal floors for ceramic, natural stone, resilient and wooden coatings.…

Self-levelling, ultra quick-hardening smoothing compound for thicknesses from 1…

MAPEFLOOR I 500 W

Two-component, vapour-permeable, neutral-coloured epoxy formulate in water dispersion for industrial floors. May be coloured with MAPECOLOR PASTE. TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 1…

Two-component, vapour-permeable, neutral-coloured epoxy formulate in water…

TRIBLOCK TMB

Three-component, self-levelling, epoxy-cementitious coating for layers from 1.5 to 3 mm thick. TECHNICAL DATA: Mixing ratio: comp. A : comp. B : comp. C = 1 : 3 : 20. Colour of mix: light grey.…

Three-component, self-levelling, epoxy-cementitious coating for layers from 1.5…

MAPECRETE LI HARDENER

Surface treatment in liquid form made from lithium silicate with a consolidating effect, for new or old concrete floors and concrete surfaces broadcast with quartz sand. TECHNICAL DATA: Application…

Surface treatment in liquid form made from lithium silicate with a…

MAPETOP N AR6

Pre-blended, ready-to-use industrial hardener for concrete floors made from special quartz in a granulometric curve, Portland cement and special additives. TECHNICAL DATA: Colour of mix: light grey,…

Pre-blended, ready-to-use industrial hardener for concrete floors made from…

MAPECRETE STAIN PROTECTION

Hydro-oil repellent and anti-stain treatment for concrete, natural stone and cementitious surfaces made from modified organic polymers in water solution. TECHNICAL DATA: Application temperature…

Hydro-oil repellent and anti-stain treatment for concrete, natural stone and…

MAPEFLOOR FINISH 630

Two-component, protective acrylic filming agent in water dispersion for concrete, ULTRATOP and ULTRATOP LIVING floors. TECHNICAL DATA: Mixing ratio: comp. A: comp. B: = 10 : 0.15. Colour of mix:…

Two-component, protective acrylic filming agent in water dispersion for…

MAPEFLOOR FINISH 52 W

Two-component, polyurethane finishing product in water dispersion with low yellowing properties, for anti-dust and anti-oil treatments. TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 87 : 13.…

Two-component, polyurethane finishing product in water dispersion with low…

ULTRATOP STUCCO

Grout made from special hydraulic binders for sealing micro-porosity which forms after the first polishing phase of ULTRATOP. TECHNICAL DATA: Consistency: fine powder. Colour: white, beige, light…

Grout made from special hydraulic binders for sealing micro-porosity which…

MAPELUX LUCIDA

Double-reticulation, high-strength shiny metallic wax. TECHNICAL DATA: Appearance: emulsion. Colour: bluish-white. Application temperature range: from +10°C to +30°C. pH: 8.4 ± 0.2. Storage: 12…

Double-reticulation, high-strength shiny metallic wax. TECHNICAL DATA:…

MAPELUX OPACA

Double-reticulating, high-strength matt metallic wax. TECHNICAL DATA: Appearance: emulsion. Colour: bluish-white. Application temperature range: from +10°C to +30°C. pH: 8.4 ± 0.2. Storage: 12 months…

Double-reticulating, high-strength matt metallic wax. TECHNICAL DATA:…

MAPECOAT I 600W

Two-component transparent epoxy primer in water dispersion. TECHNICAL DATA: Consistency of mix: fluid. Colour of mix: opaline. Mixing ratio: comp. A: comp. B = 2.3 : 3.6. Workability time: 2-3 hours.…

Two-component transparent epoxy primer in water dispersion. TECHNICAL DATA:…

PRIMER SN

Two-component epoxy primer with fillers. May be coloured with MAPECOLOR PASTE. TECHNICAL DATA: Mixing ratio: component A : component B = 80 : 20. Colour of mix: neutral. Consistency of the mix:…

Two-component epoxy primer with fillers. May be coloured with MAPECOLOR PASTE.…

SL85K / Ultratop 85K

CF38 / Mapefloor CPU 38K

1 2

Concrete and resin, between aesthetics and technique

The Mapei research and development laboratories have developed a series of systems for epoxy, polyurethane and cementitious floors which allow users to upgrade floors quickly and efficiently to match their real use. Our proposals are also certified according to the most severe standards and are widely used in numerous sectors of industry such as the food and chemical-pharmaceuticals industries, in contemporary surroundings, places of artistic interest, open offices and in industrial, civil and commercial settings