Project Complexe Courcellor, Levallois-Perret

Complexe Courcellor

Levallois-Perret, France

Ref #: 6068

Category: COMMERCIAL FACILITIES

Construction


Yard	Complexe Courcellor II
Location	Levallois-Perret, France
Subcategory	SHOPPING CENTER
Application	réparation des fissures et bétons, ragréage mural et finition des bétons, renforcement structural, le scellement d’éléments, imperméabilisation et blocage d’infiltrations d’eau, ragréage de sol et rattrapage de niveaux
Start and finish date	2011/2012
Application Type	Floor/wall coverings
Client	Semalrep, Nexity
Architects	Calq Architecture, Epstein et Glaiman, Recevki Architecture
MAPEI Distributor	Triomat
Credits	Stéphane Lévy, JM Giraudeaux

Product used for the project

CARBOPLATE

VIEW CARBOPLATE SYSTEM CERTIFICATE WITH CVT Pultruded carbon fibre plate with a protective plastic film on both faces.

VIEW CARBOPLATE SYSTEM CERTIFICATE WITH CVT Pultruded carbon fibre plate with a…

EPOJET

EPOJET is a two-component, super-fluid epoxy resin for injections and anchorings . It is suitable for monolithic repair of structures with cracks or fissures caused by heavy loads, accidental…

EPOJET is a two-component, super-fluid epoxy resin for injections and…

EPORIP

Two component solvent-free epoxy adhesive for construction joints and for monolithic sealing of cracks in screeds

Two component solvent-free epoxy adhesive for construction joints and for…

LAMPOSILEX

Ultra quick-setting and hardening hydraulic binder for blocking seeping water.

MAPECEM PRONTO

Pre-blended, ready-to-use, quick-setting and drying (24 hours), controlled-shrinkage mortar for screeds.

Pre-blended, ready-to-use, quick-setting and drying (24 hours),…

MAPEFILL F

High-performance mortar for anchoring and sealing. Mapefill F is used for anchoring and sealing machinery, tie-rods, prefabricated metallic structures, turbines, machine tools, etc. in concrete. It…

High-performance mortar for anchoring and sealing. Mapefill F is used for…

MAPEGROUT T60

Fibre-reinforced, sulphate-resistant thixotropic mortar for repairing concrete.

MAPEWRAP 11

Two-component, normal-setting, thixotropic epoxy grout for evening out concrete surfaces and for structural bonding.

Two-component, normal-setting, thixotropic epoxy grout for evening out concrete…

MAPEWRAP 31

Two-component, medium-viscosity epoxy adhesive for impregnating MAPEWRAP fabrics using the “dry system”

Two-component, medium-viscosity epoxy adhesive for impregnating MAPEWRAP…

MAPEWRAP C UNI-AX

High-strength, unidirectional carbon fibre fabric with a high modulus of elasticity

High-strength, unidirectional carbon fibre fabric with a high modulus of…

MAPEWRAP PRIMER 1

Two-component epoxy primer specifically formulated for the MapeWrap system

PLANITOP 400

Quick-setting, controlled-shrinkage thixotropic mortar for repairing the surface of concrete, may be applied in various thicknesses from 1 to 40 mm in a single layer.

Quick-setting, controlled-shrinkage thixotropic mortar for repairing the…

PRIMER G

Synthetic resin primer in water dispersion with a very low content of volatile organic compounds (VOC).

Synthetic resin primer in water dispersion with a very low content of volatile…

ULTRAPLAN MAXI is a self-levelling smoothing compound used in interiors for levelling and smoothing differences in thicknesses from 3 to 40 mm on new or existing substrates, preparing them to receive…

ULTRAPLAN MAXI is a self-levelling smoothing compound used in interiors for…

ULTRATOP

ULTRATOP SYSTEM is a self-levelling cementitious system for creating flooring with high performance properties, such as resistance to wear and abrasion . Thanks to these properties, the system is…

ULTRATOP SYSTEM is a self-levelling cementitious system for creating flooring…