GRANIRAPID is a two-component, fast-setting and hydrating , deformable , high-performance cementitious adhesive, for ceramic tiles and stone material. Particularly suitable for stone materials…
GRANIRAPID is a two-component, fast-setting and hydrating , deformable ,…
KERACOLOR FF is a high-performance , polymer-modified cementitious mortar with water-repellent DropEffect ® technology for grouting joints up to 6 mm. Available in 20 colours . Mixed with the…
KERACOLOR FF is a high-performance , polymer-modified cementitious mortar with…
KERACOLOR GG is a high-performance polymer-modified cementitious mortar for grouting joints from 4 to 15 mm . Available in 20 colours . Mixed with the Fugolasti c admixture, it reaches a level of…
KERACOLOR GG is a high-performance polymer-modified cementitious mortar for…
KERAPOXY is a two-component acid-resistant high-performance epoxy grout for grouting ceramic tiles and stone material, for joints of at least 1 mm. Can also be used as an adhesive.
KERAPOXY is a two-component acid-resistant high-performance epoxy grout for…
MAPEFLOOR I 300 SL is an epoxy formulation by Mapei for epoxy resin-based systems used to create industrial flooring. May be used for: multi-layered industrial flooring ( Mapefloor System 31 and…
MAPEFLOOR I 300 SL is an epoxy formulation by Mapei for epoxy resin-based…
Super-plasticising sulphonated naphthalene admixtures for concrete. Permits the amount of mixing water to be drastically reduced, with a considerable increase in strength, even after short curing…
Super-plasticising sulphonated naphthalene admixtures for concrete. Permits the…
MAPEGROUT THIXOTROPIC ZERO is used for repairing horizontal and vertical surfaces on degraded concrete structures ; may be applied in thick layers without using formwork. It is a pre-blended mortar…
MAPEGROUT THIXOTROPIC ZERO is used for repairing horizontal and vertical…
MAPELASTIC two-component, elastic cementitious mortar made from cementitious binders, fine-grained selected aggregates, special admixtures and synthetic polymers in dispersed water, is the definitive…
MAPELASTIC two-component, elastic cementitious mortar made from cementitious…
Powdered admixture with pozzolanic action to be used in combination with superplasticizers for high-quality mortar, grout and concrete with thixotropic, plastic, fluid or super-fluid consistency.
Powdered admixture with pozzolanic action to be used in combination with…
Quick-drying, thixotropic, cementitious smoothing compound for thicknesses from 1 to 20 mm, including on vertical surfaces. Suitable for local repairs.
Quick-drying, thixotropic, cementitious smoothing compound for thicknesses from…
TOPCEM PRONTO is a ready-mixed mortar , easy to use with high thermal conductivity, for high-efficiency heated floors . Dries more quickly than normal sand/cement screeds to make your work simpler…
TOPCEM PRONTO is a ready-mixed mortar , easy to use with high thermal…
ULTRACOLOR PLUS is a high performance, quick-setting and drying cementitious mortar for grouting joints up to 20 mm wide. The range of colours of ULTRACOLOR PLUS grouts brings out the beauty of any…
ULTRACOLOR PLUS is a high performance, quick-setting and drying cementitious…