Product detail

ULTRAMASTIC III

Ready-to-use, high-performance adhesive paste with no vertical slip and long open time, for laying ceramic tiles on walls and floors.

Ready-to-use, high-performance adhesive paste with no vertical slip and long…

MAPECOAT TNS EXTREME is a two-component , rapid-drying epoxy-acrylic resin in water dispersion with selected fillers specifically formulated in the Mapei Research & Development laboratories to create…

MAPECOAT TNS EXTREME is a two-component , rapid-drying epoxy-acrylic resin in…

MAPEGUARD EC

Special pieces of MAPEGUARD WP SYSTEM for waterproofing outer corners

MAPEFLEX E-PU 21 SL

Two-component, high-strength, castable epoxy polyurethane sealant with high modulus of elasticity.

Two-component, high-strength, castable epoxy polyurethane sealant with high…

MAPEFLEX E-PU 30 NS

Two-component, high-strength, epoxy-polyurethane sealant with high modulus of elasticity.

Two-component, high-strength, epoxy-polyurethane sealant with high modulus of…

MAPEFLEX MS 40

Hybrid paintable sealant with low modulus of elasticity also for wet substrates, for movements up to 25%.

Hybrid paintable sealant with low modulus of elasticity also for wet…

MAPEFIX VINYBOND

Styrene-free, hybrid vinyl ester resin-bases chemical fastener for structural loads. Certified for threaded rods in concrete and rebar in reinforced concrete.

Styrene-free, hybrid vinyl ester resin-bases chemical fastener for structural…

MAPEFIX POLYBOND

Polyester, resin-based chemical fastener for heavy loads. Certified for threaded rods in concrete.

Polyester, resin-based chemical fastener for heavy loads. Certified for…

MAPEFLOOR I 306 CR

Two-component, low emission epoxy formulate for coating self-levelling floors in clean rooms. Available only upon request.

Two-component, low emission epoxy formulate for coating self-levelling floors…

MAPEFIBRE ST 50 TWISTED

Class II structural polymer fibres, in compliance with EN 14889-2:2006, with a length of 50 mm respectively, developed to improve the performance characteristics of conventional concrete, pre-cast…

Class II structural polymer fibres, in compliance with EN 14889-2:2006, with a…

MAPECOAT FILLER

Micrometric filler material in polyamide used to create surfaces with a non-slip finish.

Micrometric filler material in polyamide used to create surfaces with a…

MAPEFLOOR JA

Two-component thixotropic epoxy adhesive for installing MAPEJOINT 100/25 and MAPEJOINT 100/12 prefabricated polymer jointing profiles and for carrying out small repairs and grouting on concrete…

Two-component thixotropic epoxy adhesive for installing MAPEJOINT 100/25 and…