Cementitious and resin flooring

The products from this line enable you to create floors of the highest technical and aesthetic quality for a vast range of uses. In fact, numerous settings can benefit from innovative flooring resistant to abrasion, impact loads, cracking and aggressive chemical agents.

STABILCEM LF

Super-fluid cementitious expansive binder reinforced with steel fibres for mixing compensated-shrinkage, high strength, ductile concrete

Super-fluid cementitious expansive binder reinforced with steel fibres for…

RE-CON ZERO EVO

Two-component powder product used to completely recover returned concrete from mixer trucks

Two-component powder product used to completely recover returned concrete from…

MAPEQUICK AF 100 RP

Water re-dispersible powder alkali-free accelerator for shotcrete

MAPECLEAN REMOVER

Acid-based cleaning solution for concrete and cement

MAPESOIL VD

High-performance hydraulic binder used to make drainage layers for playing surfaces

High-performance hydraulic binder used to make drainage layers for playing…

MAPEDRILL FFT

Natural powder clay ideally suited to soil stabilisation in front of tunnel boring machines

Natural powder clay ideally suited to soil stabilisation in front of tunnel…

MAPEDRILL FR 10

Stabilizing polymer for cementitious grouts

MAPEJOINT 100/12

Pre-cast composite polymeric joint

MAPEGROUT DRAIN FILL NV

Filler mortar for semi-flexible floors

MAPEI ACF-L2

Regenerating liquid admixture for bitumen used in the production of bituminous conglomerate made from modified bitumen and standard bitumen

Regenerating liquid admixture for bitumen used in the production of bituminous…

MAPEI ACF-R200

Regenerating liquid admixture, for bitumen used in the production of bituminous conglomerates made from modified bitumen and standard bitumen, including at low temperatures

Regenerating liquid admixture, for bitumen used in the production of bituminous…

MAPEGROUT DRAIN FILL

Filler mortar for semi-flexible floors

RE-CON ZERO BACKFILL

Powder product used to completely recover returned concrete with low slump from mixer trucks

Powder product used to completely recover returned concrete with low slump from…

MAPECOAT TNS PRIMER EPW

Two-component epoxy primer in water dispersion

MAPETARD PLUS

Liquid set-retarding admixture for conventional concrete and RCC

MAPESTART 1

Pumping aid admixture for concretes Where to use Mapestart 1 has to be mixed with water. Add 20-35 l of water for each bag (nearly 225 g) of Mapestart 1. The quantity of Mapestart 1, i.e. the number…

Pumping aid admixture for concretes Where to use Mapestart 1 has to be mixed…

MAPEPLAST PMX

Admixture for enhancing the pumpability of concrete Where to use Thanks to its special formula, Mapeplast PMX makes the cement mix highly cohesive. Mapeplast PMX is especially recommended for: –…

Admixture for enhancing the pumpability of concrete Where to use Thanks to its…

EXPANJET

One-component cementitious mixture based on special hydraulic binders with high fine aggregate, having the property of expanding more than 70% with respect to the volume injected Where to use –…

One-component cementitious mixture based on special hydraulic binders with high…

PLANITOP T1

Two-component cement mortar for concrete finishing Where to use For superficial protection and levelling of concrete surfaces. Consumption 2 kg/m2 per mm of thickness. Packaging Units of 30.5 kg…

Two-component cement mortar for concrete finishing Where to use For superficial…

SILICAJET EXP-G

Two-component organo-mineral fast-reactive resin without CFC with a high expansion ratio

Two-component organo-mineral fast-reactive resin without CFC with a high…

1 ... 78 79 80

Concrete and resin, between aesthetics and technique

The Mapei research and development laboratories have developed a series of systems for epoxy, polyurethane and cementitious floors which allow users to upgrade floors quickly and efficiently to match their real use. Our proposals are also certified according to the most severe standards and are widely used in numerous sectors of industry such as the food and chemical-pharmaceuticals industries, in contemporary surroundings, places of artistic interest, open offices and in industrial, civil and commercial settings