Back

Aquaflex Roof Premium - Ready to Use Liquid Waterproofing Membrane from Mapei

March 28, 2019. 6:09 AM

Aquaflex Roof Premium

Aquaflex Roof Premium is a ready-to-use liquid waterproofing membrane, solvent-free and without VOC, formulated by the MAPEI R&D laboratories. Once applied, Aquaflex Roof Premium forms a seamless membrane with 400% elongation capacity that is resistant to atmospheric agents, UV rays and ponding water. Also, thanks to the special fillers contained in Aquaflex Roof Premium, it is resistant to foot traffic and may be applied on all walkable areas without an additional protective layer. Aquaflex Roof Premium adheres extremely well to numerous types of substrate and, thanks to its excellent elasticity and crack-bridging capacity (more than 30 min when reinforced with Mapetex 50), it is resistant to dynamic loads and stresses which normally act on roof structures. The excellent mechanical characteristics of Aquaflex Roof Premium remain stable over the years which make the product highly durable.

WHERE TO USE

For waterproofing:

Flat, sloping and curved roofs and roofs with a complex shapes;
New and existing roofs;
Terraces, balconies, walkways and walkable areas in general.

Aquaflex Roof Premium may be applied on:

Concrete;
Cementitious screeds and screeds made using special binders (Topcem or Topcem Pronto);
Ceramic and stone tiles;
Fibre cement slabs;
Existing bituminous membranes;
Galvanized sheet, copper, aluminium, steel and iron

ADVANTAGES:

High elongation
Resistant to UV rays
Resistant to ponding water
Excellent elasticity and crack-bridging
Perfect adhesion to substrates
SRI (Solar Reflectance Index) 103
Solvent-free and no VOC
CE-Certified in compliance with EN 1504-2

Technical Data
Product Identity
Consistency	Paste
Density (g/cm³)	1.25
Dry solids content (%)	60
Brookfield viscosity (mPa-s)	20,000
Application Data
Application temperature	+5⁰C - +35⁰C
Waiting time at +23⁰C – 50% RH	Mapecoat I 600W and 1^st coat approx. 3-4 hrs or Primer for Aquaflex and 1^st coat, approx.. 5-6 house -- each coat of Aquaflex Roof Premium: approx.. 2 hours Set to foot traffic: approx.. 24 hours
Waiting time at +5⁰C – 50% RH	Mapecoat I 600 W and 1^st Coat: approx. 24 hours or Primer for Aquaflex and 1^st coat : approx.. 24 hours Each coat of Aquaflex Roof Premium: approx. 24 hours Set to foot traffic: approx. 48 hours
Waiting time at +35⁰C – 50% RH	Mapecoat I 600 W and 1^st coat : approx. 1-2 hours or Primer for Aquaflex and 1^st coat: approx. 2-4 hours Each coat of Aquaflex Roof Premium: approx. 1 hour Set to foot traffic: approx.. 24 hours
Mechanical Characteristics
Elongation at failure at +23⁰C = 50% RH (ISO 37) (%)	400
Tensile strength at +23⁰C – 50% RH (ISO 37) (N/mm²)	4