Project Sándor- Metternich Castle, Bajna


Yard	Facade maintenance for outbuildings with POROMAP SYSTEM on 1500 square meters, waterproofing.
Location	Bajna, Hungary
Subcategory	CASTLE
Application	Facade maintenance, waterproofng.
Start and finish date	2018/2021
Application Type	Concrete restoration systems, Masonry restoration, Waterproofing systems
Contractor company	Pharos ’95 Kft.
Installer companies	Pharos ’95 Kft.
Architects	Zoltán Erő, Palatinum Stúdió
MAPEI Distributor	Mapei Kft., Budaörs
Credits	Mário Bere
MAPEI Coordination	Zsolt Lakatos

ADDITIX PE

Admixture to make epoxy and polyurethane products thicker with a thixotropic consistency. TECHNICAL DATA: Appearance: powder. Colour: white. Density: 960 kg/m³. Consumption: 1.5-5% by weight on the…

Admixture to make epoxy and polyurethane products thicker with a thixotropic…

ADESILEX PG1

Two-component, rapid-setting thixotropic adhesive for structural bonds. TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 3 : 1. Pot life of mix: 35 minutes (at +23°C). Minimum applicable thickness:…

Two-component, rapid-setting thixotropic adhesive for structural bonds.…

KERAFLEX MAXI S1

High performance, deformable cementitious adhesive with extended open time and no vertical slip, for ceramic and vitrified tiles and stone material, also suitable for the installation of large-size…

High performance, deformable cementitious adhesive with extended open time and…

Two-component transparent epoxy primer in water dispersion. TECHNICAL DATA: Consistency of mix: fluid. Colour of mix: opaline. Mixing ratio: comp. A: comp. B = 2.3 : 3.6. Workability time: 2-3 hours.…

Two-component transparent epoxy primer in water dispersion. TECHNICAL DATA:…

MAPEFOAM

Closed-cell, extruded foam polyethylene cord used as a support for elastomer sealants to gauge the correct size of flexible joints. Supplied in rolls in various lengths according to the diameter of…

Closed-cell, extruded foam polyethylene cord used as a support for elastomer…

MAPELASTIC

Two-component, flexible cementitious mortar for waterproofing balconies, terraces, bathrooms and swimming pools. TECHNICAL DATA: Consistency of mix: plastic-trowable. Mixing ratio: comp. A: comp. B =…

Two-component, flexible cementitious mortar for waterproofing balconies,…

MAPESIL LM

Neutral silicone mould-resistant sealant with BioBlock ® technology for stone for movements up to 25%. TECHNICAL DATA: Movement in service: 25%. Modulus of elasticity at 100% elongation: 0.35 N/mm².…

Neutral silicone mould-resistant sealant with BioBlock ® technology for stone…

MAPEWRAP 31

Two-component, medium-viscosity epoxy adhesive for impregnating MAPEWRAP using the “dry system”. TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 4 : 1. Workability time: 40 minutes (at +23°C). Bond…

Two-component, medium-viscosity epoxy adhesive for impregnating MAPEWRAP using…

MAPEWRAP C FIOCCO

High-strength carbon fibre cord to be impregnated with MAPEWRAP 21 (two-component, super-fluid epoxy resin) to make “structural connections”. TECHNICAL DATA: Type of fibre: high-strength carbon.…

High-strength carbon fibre cord to be impregnated with MAPEWRAP 21…

MAPEWRAP G FIOCCO

High-strength glass fibre cord to be impregnated with MAPEWRAP 21 (two-component, super-fluid epoxy resin) to make “structural connections”. TECHNICAL DATA: Type of fibre: E type glass. Diameters…

High-strength glass fibre cord to be impregnated with MAPEWRAP 21…

MAPEWRAP PRIMER 1

Two-component epoxy primer specifically formulated for the MAPEWRAP system. TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 3 : 1. Workability time: 90 minutes (at +23°C). Bond strength to…

Two-component epoxy primer specifically formulated for the MAPEWRAP system.…

PLANITOP FAST 330

Quick-setting, fibre-reinforced cementitious levelling mortar for internal and external floors and walls, applied in layers from 3 to 30 mm to even out irregularities. TECHNICAL DATA: Where to use:…

Quick-setting, fibre-reinforced cementitious levelling mortar for internal and…

PLASTIMUL PRIMER

Solvent-free, bitumen primer for treating substrates before applying waterproofing products from the PLASTIMUL range. TECHNICAL DATA: Consistency: thixotropic, liquid. Density: 1 kg/l. pH: 10. Dry…

Solvent-free, bitumen primer for treating substrates before applying…

PRIMER 3296

Acrylic primer in water dispersion with high penetration, consolidating and anti-dust properties for screeds. TECHNICAL DATA: Consistency: liquid. Colour: opaline. Dilution ratio: as is, 1: 1 or 1:2…

Acrylic primer in water dispersion with high penetration, consolidating and…

QUARZO 0,25 0,5 1,9

Quartz sand used as a “filler” and/or for “sprinkling” on epoxy systems. TECHNICAL DATA: Colour: light grey. Maximum size of inerts: 0.25 mm.

Quartz sand used as a “filler” and/or for “sprinkling” on epoxy systems.…

TOPCEM PRONTO

Ready-to-use, normal-setting, controlled-shrinkage mortar with high thermal efficiency for quick-drying (4 days) screeds. TECHNICAL DATA: Mixing ratio: 1 25 kg bags of TOPCEM PRONTO with 1.7 litres…

Ready-to-use, normal-setting, controlled-shrinkage mortar with high thermal…