Project Showroom PSA Retail, Schlieren, Schlieren

Showroom PSA Retail, Schlieren

Schlieren, Switzerland

Ref #: 4558

Category: COMMERCIAL FACILITIES

Construction


Yard	Renovation and installation of large-format ceramic tile floors on 1000 m2
Location	Schlieren, Switzerland
Subcategory	CAR DISTRIBUTOR
Application	Product supply for the installation of large-format tiles
Start and finish date	2018/2019
Application Type	Installation of floors
Contractor company	Allreal Generalunternehmung AG, Glattpark
Installer companies	Keramik Kreationen GmbH, Wermatswil
Architects	A2017plus Architekten, Zurich
MAPEI Coordination	Fredi Mock

Product used for the project

ELASTORAPID

Two-component, high-performance, highly-deformable, quick-setting and drying cementitious adhesive with no vertical slip and extended open time for ceramic tiles and stone material (thickness of…

Two-component, high-performance, highly-deformable, quick-setting and drying…

$LATEX PLUS$

LATEX PLUS

Elasticising latex mixed with KERAQUICK S1. When KERAQUICK S1 is mixed with LATEX PLUS it forms a high-performance, quick-setting, highly-deformable adhesive (C2F/S2). TECHNICAL DATA OF LATEX PLUS +…

Elasticising latex mixed with KERAQUICK S1. When KERAQUICK S1 is mixed with…

Two-component, flexible cementitious mortar for waterproofing balconies, terraces, bathrooms and swimming pools. TECHNICAL DATA: Consistency of mix: plastic-trowable. Mixing ratio: comp. A: comp. B =…

Two-component, flexible cementitious mortar for waterproofing balconies,…

MAPENET 150

Alkali-resistant glass fibre mesh (in compliance with the ETAG 004 guide) for reinforcing protective waterproofing layers, anti-fracture membranes and thermal insulation systems. TECHNICAL DATA:…

Alkali-resistant glass fibre mesh (in compliance with the ETAG 004 guide) for…

PLANITOP FAST 330

Quick-setting, fibre-reinforced cementitious levelling mortar for internal and external floors and walls, applied in layers from 3 to 30 mm to even out irregularities. TECHNICAL DATA: Where to use:…

Quick-setting, fibre-reinforced cementitious levelling mortar for internal and…

PRIMER G

Synthetic resin primer in water dispersion with a very low content of volatile organic compounds (VOC). TECHNICAL DATA: Consistency: liquid. Colour: blue. Dilution rate: from 1:1 to 1: 3 with water…

Synthetic resin primer in water dispersion with a very low content of volatile…

PRIMER MF

Two-component, solvent-free epoxy primer used as bonding promoter for products from the MAPEFLOOR range, for consolidating and waterproofing against residual damp on cementitious substrates and as…

Two-component, solvent-free epoxy primer used as bonding promoter for products…

QUARZO 0,25 0,5 1,9

Quartz sand used as a “filler” and/or for “sprinkling” on epoxy systems. TECHNICAL DATA: Colour: light grey. Maximum size of inerts: 0.25 mm.

Quartz sand used as a “filler” and/or for “sprinkling” on epoxy systems.…

TOPCEM PRONTO

Ready-to-use, normal-setting, controlled-shrinkage mortar with high thermal efficiency for quick-drying (4 days) screeds. TECHNICAL DATA: Mixing ratio: 1 25 kg bags of TOPCEM PRONTO with 1.7 litres…

Ready-to-use, normal-setting, controlled-shrinkage mortar with high thermal…

ULTRACOLOR PLUS

High-performance, anti-efflorescence, quick-setting and drying polymer-modified mortar with water-repellent DropEffect ® and mould-resistant BioBlock ® technology for grouting joints 2 to 20 mm wide.…

High-performance, anti-efflorescence, quick-setting and drying polymer-modified…