Project Route 2020, Dubai


Yard	Tunnels and stations
Location	Dubai, United Arab Emirates
Subcategory	TUNNEL
Application	Supply of products for underground construction and ceramic installation
Application Type	Products for underground construction (utt)

EPORIP

Two-component, solvent-free epoxy adhesive for monolithic sealing cracked screeds. TECHNICAL DATA: Consistency: comp. A: fluid paste; comp. B: fluid paste. Colours: comp. A: black; comp. B: white.…

Two-component, solvent-free epoxy adhesive for monolithic sealing cracked…

FUGOLASTIC

Polymer liquid admix for KERACOLOR FF, KERACOLOR GG and KERACOLOR SF. TECHNICAL DATA OF FUGOLASTIC + KERACOLOR: Pot life of mix: approx. 2 hours. Waiting time before finishing: 10-20 minutes. Set to…

Polymer liquid admix for KERACOLOR FF, KERACOLOR GG and KERACOLOR SF. TECHNICAL…

GRANIRAPID

Two-component, high-performance, deformable, quick-setting and drying cementitious adhesive for ceramic tiles and stone material (thickness of adhesive up to 10 mm). TECHNICAL DATA: Consistency:…

Two-component, high-performance, deformable, quick-setting and drying…

Pre-blended, high-performance, polymer-modified cementitious mortar with water-repellent DropEffect ® technology for grouting joints up to 6 mm wide. TECHNICAL DATA: Pot life of mix: approx. 2 hours.…

Pre-blended, high-performance, polymer-modified cementitious mortar with…

KERAFLEX MAXI S1

High performance, deformable cementitious adhesive with extended open time and no vertical slip, for ceramic and vitrified tiles and stone material, also suitable for the installation of large-size…

High performance, deformable cementitious adhesive with extended open time and…

KERAPOXY

Two-component, high-performance, anti-acid epoxy mortar and adhesive with no vertical slip for laying and grouting ceramic tiles and stone material (minimum width of joints 3 mm). TECHNICAL DATA: Pot…

Two-component, high-performance, anti-acid epoxy mortar and adhesive with no…

LAMPOSILEX

Ultra quick-setting and hardening hydraulic binder for blocking seeping water. TECHNICAL DATA: Consistency: fine powder. Workability time at +20°C: approximately 1 minute. Storage: 12 months. Mixing…

Ultra quick-setting and hardening hydraulic binder for blocking seeping water.…

MAPEFILL

Fluid expansive mortar for anchoring objects in place. TECHNICAL DATA: Maximum dimension of aggregate: 2.5 mm. Mixing ratio: 100 parts of MAPEFILL with 14-15 parts of water. Pot life of mix:…

Fluid expansive mortar for anchoring objects in place. TECHNICAL DATA: Maximum…

MAPENET 150

Alkali-resistant glass fibre mesh (in compliance with the ETAG 004 guide) for reinforcing protective waterproofing layers, anti-fracture membranes and thermal insulation systems. TECHNICAL DATA:…

Alkali-resistant glass fibre mesh (in compliance with the ETAG 004 guide) for…

MAPESIL LM

Neutral silicone mould-resistant sealant with BioBlock ® technology for stone for movements up to 25%. TECHNICAL DATA: Movement in service: 25%. Modulus of elasticity at 100% elongation: 0.35 N/mm².…

Neutral silicone mould-resistant sealant with BioBlock ® technology for stone…

MAPETHERM AR1

One-component cementitious mortar for bonding and levelling insulation panels and for thermal insulation systems. TECHNICAL DATA: Consistency: powder. Colour: grey. Density of the mix (kg/m³): 1,450.…

One-component cementitious mortar for bonding and levelling insulation panels…

PLANITOP 100

Quick-setting, light-grey coloured fine mortar for repairing and smoothing concrete and render. TECHNICAL DATA: Maximum dimension of aggregate: 0.2 mm. Mixing ratio: 100 parts of PLANITOP 100 with…

Quick-setting, light-grey coloured fine mortar for repairing and smoothing…

PRIMER G

Synthetic resin primer in water dispersion with a very low content of volatile organic compounds (VOC). TECHNICAL DATA: Consistency: liquid. Colour: blue. Dilution rate: from 1:1 to 1: 3 with water…

Synthetic resin primer in water dispersion with a very low content of volatile…

PRIMER SN

Two-component epoxy primer with fillers. May be coloured with MAPECOLOR PASTE. TECHNICAL DATA: Mixing ratio: component A : component B = 80 : 20. Colour of mix: neutral. Consistency of the mix:…

Two-component epoxy primer with fillers. May be coloured with MAPECOLOR PASTE.…

QUARZO 1,2

Calibrated silica sand to improve the bond on resin or epoxy primers. TECHNICAL DATA: Colours: grey - beige. Grain size: 0.7-1.2. Packaging: 25 kg bags.

Calibrated silica sand to improve the bond on resin or epoxy primers. TECHNICAL…

QUARZOLITE BASE COAT

Coloured acrylic undercoat with a smooth finish and good filling and adhesion promoting properties, for internal and external surfaces. TECHNICAL DATA: Consistency: thick liquid. Colour: white or…

Coloured acrylic undercoat with a smooth finish and good filling and adhesion…

QUARZOLITE TONACHINO

High-protection, thick-layered acrylic coating product with high filling properties for internal and external surfaces. Available in the following granulometries: 0.7 mm, 1.2 mm, 1.5 mm and 2.0 mm.…

High-protection, thick-layered acrylic coating product with high filling…

TOPCEM

Special normal-setting, quick-drying (4 days), controlled-shrinkage hydraulic binder for screeds. TECHNICAL DATA: Recommended mixing ratio: 200÷250 kg of TOPCEM with 1 m³ of aggregates (diameter from…

Special normal-setting, quick-drying (4 days), controlled-shrinkage hydraulic…

ULTRABOND ECO 375

Adhesive in water dispersion with a strong and quick initial bond, long open time and very low emission level of volatile organic compounds (VOC), for vinyl floors. TECHNICAL DATA: Colour: light…

Adhesive in water dispersion with a strong and quick initial bond, long open…

ULTRACOLOR PLUS

ULTRACOLOR PLUS is a high performance, quick-setting and drying cementitious mortar for grouting joints up to 20 mm wide. The range of colours of ULTRACOLOR PLUS grouts brings out the beauty of any…

ULTRACOLOR PLUS is a high performance, quick-setting and drying cementitious…

ULTRAPLAN

Self-levelling, ultra quick-hardening smoothing compound for thicknesses from 1 to 10 mm. TECHNICAL DATA: Where to use: internal floors for ceramic, natural stone, resilient and wooden coatings.…

Self-levelling, ultra quick-hardening smoothing compound for thicknesses from 1…

ULTRAPLAN ECO

Self-levelling, ultra quick-hardening smoothing compound for thicknesses from 1 to 10 mm, with a very low emission level of volatile organic compounds (VOC). TECHNICAL DATA: Where to use: internal…

Self-levelling, ultra quick-hardening smoothing compound for thicknesses from 1…

ULTRAPLAN MAXI

Self-levelling, ultra quick-hardening smoothing compound for thicknesses from 3 to 40 mm. TECHNICAL DATA: Where to use: internal floors for ceramic, natural stone, resilient and wooden coatings.…

Self-levelling, ultra quick-hardening smoothing compound for thicknesses from 3…