Project Operations and maintenance center of the TPF, Givisiez, Granges-Paccot


Yard	Operations and maintenance center of the TPF, Givisiez
Location	Granges-Paccot, Switzerland
Subcategory	PLANT
Built in	2016
Opened in	2019
Application	Delivery of concrete admixtures, waterproofing products and products for ceramics
Start and finish date	2016/2019
Application Type	Admixtures for concrete, Floor/wall covering, Waterproofing systems
Contractor company	Transports publics fribourgeois (TPF), Fribourg
Installer companies	Isoltech Morel Sàrl, Châtel-St-Denis; Carrelages Sassi SA, Corminboeuf
Architects	CSD Ingénieurs SA, Fribourg; SD Ingénierie Fribourg SA, Fribourg; Stucky ingénieurs-conseils SA, Renens
Specialists involved	Frutiger SA, Fribourg
Credits	Sébastien Crettaz
MAPEI Coordination	Alexandre Perona, Thierry Sandoz

ADESILEX PG4

Two-component, thixotropic epoxy adhesive with modified rheology for bonding MAPEBAND, MAPEBAND TPE, PVC strips and Hypalon and for structural bonds. TECHNICAL DATA: Mixing ratio: comp. A : comp. B =…

Two-component, thixotropic epoxy adhesive with modified rheology for bonding…

ANTIGELO S

Chloride-free antifreeze for cementitious mortars and concrete. Antifreeze S is used to prepare mortars and concrete (including reinforced) for use at ambient temperature as low as to -10°C.…

Chloride-free antifreeze for cementitious mortars and concrete. Antifreeze S is…

DYNAMON SX 14

Fine aggregate supplementing super-plasticizer for concrete with low loss of workability and high reduction of mixing water Where to use Dynamon SX 14 is particularly suitable for all applications…

Fine aggregate supplementing super-plasticizer for concrete with low loss of…

DYNAMON SX 18

Superfluidificante accelerante, integratore di parti fini, per calcestruzzi con elevata riduzione dell’acqua d’impasto ed alte resistenze meccaniche iniziali

Superfluidificante accelerante, integratore di parti fini, per calcestruzzi con…

KERAPOXY

Two-component, high-performance, anti-acid epoxy mortar and adhesive with no vertical slip for laying and grouting ceramic tiles and stone material (minimum width of joints 3 mm). TECHNICAL DATA: Pot…

Two-component, high-performance, anti-acid epoxy mortar and adhesive with no…

MAPEFILL

Fluid expansive mortar for anchoring objects in place. TECHNICAL DATA: Maximum dimension of aggregate: 2.5 mm. Mixing ratio: 100 parts of MAPEFILL with 14-15 parts of water. Pot life of mix:…

Fluid expansive mortar for anchoring objects in place. TECHNICAL DATA: Maximum…

MAPEFLOOR EP 19

Three-component acid and wear-resistant epoxy mortar for floors. TECHNICAL DATA: Mixing ratio: A/B/C = 7.5/2.5/90. Consistency of mix: damp sand. Application temperature range: from +5°C to +30°C.…

Three-component acid and wear-resistant epoxy mortar for floors. TECHNICAL…

MAPEGUM WPS

Quick-drying flexible liquid membrane for waterproofing internal surfaces. TECHNICAL DATA: Consistency: paste. Density of the mix: 1.45 g/cm³. pH: 9. Dry solids content: 73%. Storage: 24 months.…

Quick-drying flexible liquid membrane for waterproofing internal surfaces.…

MAPELASTIC

Two-component, flexible cementitious mortar for waterproofing balconies, terraces, bathrooms and swimming pools. TECHNICAL DATA: Consistency of mix: plastic-trowable. Mixing ratio: comp. A: comp. B =…

Two-component, flexible cementitious mortar for waterproofing balconies,…

PLANITOP FAST 330

Quick-setting, fibre-reinforced cementitious levelling mortar for internal and external floors and walls, applied in layers from 3 to 30 mm to even out irregularities. TECHNICAL DATA: Where to use:…

Quick-setting, fibre-reinforced cementitious levelling mortar for internal and…

PRIMER SN

Two-component epoxy primer with fillers. May be coloured with MAPECOLOR PASTE. TECHNICAL DATA: Mixing ratio: component A : component B = 80 : 20. Colour of mix: neutral. Consistency of the mix:…

Two-component epoxy primer with fillers. May be coloured with MAPECOLOR PASTE.…

TOPCEM PRONTO

Ready-to-use, normal-setting, controlled-shrinkage mortar with high thermal efficiency for quick-drying (4 days) screeds. TECHNICAL DATA: Mixing ratio: 1 25 kg bags of TOPCEM PRONTO with 1.7 litres…

Ready-to-use, normal-setting, controlled-shrinkage mortar with high thermal…