Project Eop Tower, Hradec Kralové

Eop Tower

Hradec Kralové, Czech Republic

Ref #: 3636

Category: PRODUCTION AND SERVICES

Construction


Yard	Walls covering
Location	Hradec Kralové, Czech Republic
Subcategory	TOWER
Built in	2004
Opened in	2005
Application	External installation of klinker tiles
Application Type	Wall coverings
Contractor company	Eop Opatovice
Installer companies	Basa Hradec Kralove
Architects	Ing. Arch. Pavel Zadrot
Project Manager	Zarovka Architekt Hradec Kralove

Product used for the project

ANTIPLUVIOL

High-performance, silicone water-repellent in watery solution for external walls. TECHNICAL DATA: Consistency: fluid liquid. Colour: transparent. Density (EN ISO 2811-1) (g/cm³): approx. 1.02. Dry…

High-performance, silicone water-repellent in watery solution for external…

ELASTORAPID

Two-component, high-performance, highly-deformable, quick-setting and drying cementitious adhesive with no vertical slip and extended open time for ceramic tiles and stone material (thickness of…

Two-component, high-performance, highly-deformable, quick-setting and drying…

Pre-blended, high-performance polymer-modified cementitious mortar for grouting joints 4 to 15 mm wide. TECHNICAL DATA: Pot life of mix: approx. 2 hours. Waiting time before finishing: 10-20 minutes.…

Pre-blended, high-performance polymer-modified cementitious mortar for grouting…

KERAFLEX

High-performance cementitious adhesive with no vertical slip and extended open time for ceramic and stone tiles.

High-performance cementitious adhesive with no vertical slip and extended open…

KERANET

Acid-based cleaning solution for ceramic tiles. Particularly recommended for eliminating lime efflorescence and for the final cleaning step of Tuscany terracotta. In powder (concentrated) or liquid…

Acid-based cleaning solution for ceramic tiles. Particularly recommended for…

MAPECOAT E23

Two-component epoxy primer for the protection of concrete. To be applied before the polyurethane finishing.

Two-component epoxy primer for the protection of concrete. To be applied before…

MAPECOAT I 24

Two-component epoxy paint for anti-acid coatings on concrete surfaces.

MAPECOAT PU33

NIVORAPID

Quick-drying, thixotropic, cementitious smoothing compound for thicknesses from 1 to 20 mm, including on vertical surfaces. TECHNICAL DATA: Where to use: internal floors and walls for ceramic,…

Quick-drying, thixotropic, cementitious smoothing compound for thicknesses from…

PLANITOP 400

Quick-setting, controlled-shrinkage thixotropic mortar for repairing the surface of concrete, may be applied in various thicknesses from 1 to 40 mm in a single layer. TECHNICAL DATA: Maximum…

Quick-setting, controlled-shrinkage thixotropic mortar for repairing the…

PRIMER 3296

Acrylic primer in water dispersion with high penetration, consolidating and anti-dust properties for screeds. TECHNICAL DATA: Consistency: liquid. Colour: opaline. Dilution ratio: as is, 1: 1 or 1:2…

Acrylic primer in water dispersion with high penetration, consolidating and…

PRIMER EP

Two-component epoxy primer in solvents for consolidating and waterproofing cementitious screeds and industrial floors. TECHNICAL DATA: Minimum waiting time: 24 hours according to the porosity of the…

Two-component epoxy primer in solvents for consolidating and waterproofing…

PRIMER G

Synthetic resin primer in water dispersion with a very low content of volatile organic compounds (VOC). TECHNICAL DATA: Consistency: liquid. Colour: blue. Dilution rate: from 1:1 to 1: 3 with water…

Synthetic resin primer in water dispersion with a very low content of volatile…

ULTRAPLAN ECO

Self-levelling, ultra quick-hardening smoothing compound for thicknesses from 1 to 10 mm, with a very low emission level of volatile organic compounds (VOC). TECHNICAL DATA: Where to use: internal…

Self-levelling, ultra quick-hardening smoothing compound for thicknesses from 1…

Eop Tower

Construction

Browse the project Gallery

Product used for the project

Keep in touch