Project Corona Hotel, San Giovanni Rotondo


Yard	hotel restoration
Location	San Giovanni Rotondo, Italy
Subcategory	HOTEL/INN
Built in	2010
Opened in	2012
Application	global interior and exterior hotel restoration
Application Type	Facade interventions
Client	Co. Mant sas
Contractor company	La nUova Edilizia srl
Installer companies	La Nuova Edilizia srl
Specialists involved	ing. Pasquale Cafaro
MAPEI Distributor	Savino srl

ANTIPLUVIOL S

Ultra high-performance, transparent, siloxane resin water-repellent impregnator. TECHNICAL DATA: Consistency: fluid liquid. Colour: transparent. Density (EN ISO 2811-1) (g/cm³): approx. 0.8. Active…

Ultra high-performance, transparent, siloxane resin water-repellent…

CARBOPLATE

Pultruded carbon fibre plate with a protective plastic film on both faces. TECHNICAL DATA: Modulus of elasticity: 170 - 200 - 250 GPa. Fibre content: 68% - 68% - 65%. Thickness: 1.4 mm. Width: 50,…

Pultruded carbon fibre plate with a protective plastic film on both faces.…

ELASTOCOLOR PITTURA

Elastomeric, crack-bridging, permanently flexible, protective paint with high resistance to chemicals for internal and external surfaces. TECHNICAL DATA: Consistency: thick liquid. Colour: white or…

Elastomeric, crack-bridging, permanently flexible, protective paint with high…

ELASTOCOLOR WATERPROOF

Waterproof, easy-to-clean acrylic paint for internal and external surfaces in permanent contact with water. TECHNICAL DATA: Consistency: thick liquid. Colour: colours from the colour chart range…

Waterproof, easy-to-clean acrylic paint for internal and external surfaces in…

EPORIP

Two-component, solvent-free epoxy adhesive for monolithic sealing cracked screeds. TECHNICAL DATA: Consistency: comp. A: fluid paste; comp. B: fluid paste. Colours: comp. A: black; comp. B: white.…

Two-component, solvent-free epoxy adhesive for monolithic sealing cracked…

FUGOLASTIC

Polymer liquid admix for KERACOLOR FF, KERACOLOR GG and KERACOLOR SF. TECHNICAL DATA OF FUGOLASTIC + KERACOLOR: Pot life of mix: approx. 2 hours. Waiting time before finishing: 10-20 minutes. Set to…

Polymer liquid admix for KERACOLOR FF, KERACOLOR GG and KERACOLOR SF. TECHNICAL…

IDROSILEX PRONTO

Osmotic cementitious mortar suitable for contact with drinking water for waterproofing masonry and concrete structures. TECHNICAL DATA: Consistency: powder. Pot life of mix: approximately 1 hour.…

Osmotic cementitious mortar suitable for contact with drinking water for…

KERACOLOR SF

Fine-grained, high-performance white cementitious mortar for grouting joints up to 4 mm wide. TECHNICAL DATA: Pot life of mix: approx. 2 hours. Waiting time before finishing: 10-20 minutes. Set to…

Fine-grained, high-performance white cementitious mortar for grouting joints up…

KERAFLEX

High-performance cementitious adhesive with no vertical slip and extended open time for ceramic and stone tiles.

High-performance cementitious adhesive with no vertical slip and extended open…

KERAFLEX MAXI S1

High performance, deformable cementitious adhesive with extended open time and no vertical slip, for ceramic and vitrified tiles and stone material, also suitable for the installation of large-size…

High performance, deformable cementitious adhesive with extended open time and…

MALECH

Water-based acrylic undercoat and bonding promoter with a smooth finish. TECHNICAL DATA: Consistency: fluid liquid. Colour: transparent. Density (EN ISO 2811-1) (g/cm³): approx. 1.01. Dry solids…

Water-based acrylic undercoat and bonding promoter with a smooth finish.…

MAPEBAND

Alkali-resistant rubber tape with felt for cementitious waterproofing systems and liquid sheaths. TECHNICAL DATA: In service temperature range: from -30°C to +60°C. Packaging: – 120 mmx50 m rolls; –…

Alkali-resistant rubber tape with felt for cementitious waterproofing systems…

Two-component transparent epoxy primer in water dispersion. TECHNICAL DATA: Consistency of mix: fluid. Colour of mix: opaline. Mixing ratio: comp. A: comp. B = 2.3 : 3.6. Workability time: 2-3 hours.…

Two-component transparent epoxy primer in water dispersion. TECHNICAL DATA:…

MAPEGROUT COLABILE GF

Hi-flow, shrinkage-compensated cementitious mortar reinforced with inorganic fibres, for repairing concrete structures where higher ductility is required. TECHNICAL DATA: Maximum dimension of…

Hi-flow, shrinkage-compensated cementitious mortar reinforced with inorganic…

MAPELASTIC

Two-component, flexible cementitious mortar for waterproofing balconies, terraces, bathrooms and swimming pools. TECHNICAL DATA: Consistency of mix: plastic-trowable. Mixing ratio: comp. A: comp. B =…

Two-component, flexible cementitious mortar for waterproofing balconies,…

MAPENET 150

Alkali-resistant glass fibre mesh (in compliance with the ETAG 004 guide) for reinforcing protective waterproofing layers, anti-fracture membranes and thermal insulation systems. TECHNICAL DATA:…

Alkali-resistant glass fibre mesh (in compliance with the ETAG 004 guide) for…

MAPEWRAP 31

Two-component, medium-viscosity epoxy adhesive for impregnating MAPEWRAP using the “dry system”. TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 4 : 1. Workability time: 40 minutes (at +23°C). Bond…

Two-component, medium-viscosity epoxy adhesive for impregnating MAPEWRAP using…

MAPEWRAP PRIMER 1

Two-component epoxy primer specifically formulated for the MAPEWRAP system. TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 3 : 1. Workability time: 90 minutes (at +23°C). Bond strength to…

Two-component epoxy primer specifically formulated for the MAPEWRAP system.…

NIVOPLAN

Smoothing mortar for internal and external walls and ceilings for thicknesses from 2 to 20 mm. TECHNICAL DATA: Where to use: on walls for ceramic and natural stone coatings. Workability time: 2-3…

Smoothing mortar for internal and external walls and ceilings for thicknesses…

PLANITOP 200

Water-repellent cementitious skimming mortar with a fine-textured, natural finish for concrete and plastic, glass and porcelain coverings. TECHNICAL DATA: Maximum dimension of aggregate: 0.4 mm.…

Water-repellent cementitious skimming mortar with a fine-textured, natural…

PLANITOP FAST 330

Quick-setting, fibre-reinforced cementitious levelling mortar for internal and external floors and walls, applied in layers from 3 to 30 mm to even out irregularities. TECHNICAL DATA: Where to use:…

Quick-setting, fibre-reinforced cementitious levelling mortar for internal and…

PLANITOP RASA & RIPARA

Quick-setting, fibre-reinforced, compensated-shrinkage, thixotropic cementitious mortar for repairing and smoothing concrete, applied in various thicknesses of from 3 to 40 mm in a single layer.…

Quick-setting, fibre-reinforced, compensated-shrinkage, thixotropic…

POROCOL

Cementitious adhesive mortar for expanded block masonry. TECHNICAL DATA: Maximum diameter of aggregate: 1 mm. Mixing ratio: 100 parts of POROCOL with 23-25 parts of water. Pot life of mix:…

Cementitious adhesive mortar for expanded block masonry. TECHNICAL DATA:…

PRIMER G

Synthetic resin primer in water dispersion with a very low content of volatile organic compounds (VOC). TECHNICAL DATA: Consistency: liquid. Colour: blue. Dilution rate: from 1:1 to 1: 3 with water…

Synthetic resin primer in water dispersion with a very low content of volatile…

QUARZO 0,25 0,5 1,9

Quartz sand used as a “filler” and/or for “sprinkling” on epoxy systems. TECHNICAL DATA: Colour: light grey. Maximum size of inerts: 0.25 mm.

Quartz sand used as a “filler” and/or for “sprinkling” on epoxy systems.…

QUARZO 1,2

Calibrated silica sand to improve the bond on resin or epoxy primers. TECHNICAL DATA: Colours: grey - beige. Grain size: 0.7-1.2. Packaging: 25 kg bags.

Calibrated silica sand to improve the bond on resin or epoxy primers. TECHNICAL…

SILANCOLOR BASE COAT

Water-repellent, coloured acrylic undercoat with a smooth finish and good filling properties for internal and external surfaces. TECHNICAL DATA: Consistency: thick liquid. Colour: white or various…

Water-repellent, coloured acrylic undercoat with a smooth finish and good…

SILANCOLOR TONACHINO

Transpirant, water-repellent, thick-layered siloxane coating product with high filling properties for internal and external surfaces. Available in the following granulometries: 0.7 mm, 1.2 mm, 1.5 mm…

Transpirant, water-repellent, thick-layered siloxane coating product with high…

TRIBLOCK FINISH

Three-component, epoxy-cementitious mortar for smoothing damp substrates. TECHNICAL DATA: Maximum dimension of aggregate: 0.25 mm. Mixing ratio: comp. A : comp. B : comp. C = 4.8 : 15.2 : 80. Pot…

Three-component, epoxy-cementitious mortar for smoothing damp substrates.…

ULTRACOLOR PLUS

ULTRACOLOR PLUS is a high performance, quick-setting and drying cementitious mortar for grouting joints up to 20 mm wide. The range of colours of ULTRACOLOR PLUS grouts brings out the beauty of any…

ULTRACOLOR PLUS is a high performance, quick-setting and drying cementitious…