Two-component, high-performance, deformable, quick-setting and drying cementitious adhesive for ceramic tiles and stone material (thickness of adhesive up to 10 mm). TECHNICAL DATA: Consistency:…
Two-component, high-performance, deformable, quick-setting and drying…
Elasticising latex mixed with KERABOND, KERABOND T and ADESILEX P10. When KERABOND, KERABOND T and KERABOND PLUS are mixed with ISOLASTIC they form a high-performance, highly deformable adhesive with…
Elasticising latex mixed with KERABOND, KERABOND T and ADESILEX P10. When…
Cementitious adhesive for ceramic tiles (thickness of adhesive up to 5 mm). TECHNICAL DATA: Pot life of mix: more than 8 hours. Open time: 20 minutes. Waiting time before grouting: – on walls: 4-8…
Cementitious adhesive for ceramic tiles (thickness of adhesive up to 5 mm).…
Pre-blended, high-performance, polymer-modified cementitious mortar with water-repellent DropEffect ® technology for grouting joints up to 6 mm wide. TECHNICAL DATA: Pot life of mix: approx. 2 hours.…
Pre-blended, high-performance polymer-modified cementitious mortar for grouting joints 4 to 15 mm wide. TECHNICAL DATA: Pot life of mix: approx. 2 hours. Waiting time before finishing: 10-20 minutes.…
Pre-blended, high-performance polymer-modified cementitious mortar for grouting…
Two-component, high-performance, anti-acid epoxy mortar and adhesive with no vertical slip for laying and grouting ceramic tiles and stone material (minimum width of joints 3 mm). TECHNICAL DATA: Pot…
Two-component, high-performance, anti-acid epoxy mortar and adhesive with no…
Fluid expansive mortar for anchoring objects in place. TECHNICAL DATA: Maximum dimension of aggregate: 2.5 mm. Mixing ratio: 100 parts of MAPEFILL with 14-15 parts of water. Pot life of mix:…
Fluid expansive mortar for anchoring objects in place. TECHNICAL DATA: Maximum…
Two-component cementitious mortar for finishing concrete. TECHNICAL DATA: Maximum dimension of aggregate: 0.4 mm. Mixing ratio: 4 parts of MAPEFINISH comp. A with 1 part of MAPEFINISH comp. B. Pot…
Two-component cementitious mortar for finishing concrete. TECHNICAL DATA:…
Two-component, multi-purpose, neutral-coloured epoxy formulate for industrial floor coatings up to 4 mm thick. May be coloured with MAPECOLOR PASTE. Complies with standards applied in the foodstuffs…
Two-component, multi-purpose, neutral-coloured epoxy formulate for industrial…
Super-plasticising sulphonated naphthalene admixtures for concrete. Permits the amount of mixing water to be drastically reduced, with a considerable increase in strength, even after short curing…
Super-plasticising sulphonated naphthalene admixtures for concrete. Permits the…
Super-plasticising retardant admixture for concrete, particularly suitable for use in summer to help maintain workability of the mix. TECHNICAL DATA: Dosage: from 0.5 a 1.5 litres every 100 kg of…
Super-plasticising retardant admixture for concrete, particularly suitable for…
Fibre-reinforced, compensated-shrinkage mortar for repairing concrete. TECHNICAL DATA: Maximum dimension of aggregate: 2.5 mm. Mixing ratio: 100 parts of MAPEGROUT TISSOTROPICO with 15.5-16.5 parts…
Fibre-reinforced, compensated-shrinkage mortar for repairing concrete.…
Silica fume-based admixture with pozzolanic action Where to use Mapeplast SF can be used for the following applications: • High quality thixotropic mortar, resistant even under the most severe…
Silica fume-based admixture with pozzolanic action Where to use Mapeplast SF…
Smoothing mortar for internal and external walls and ceilings for thicknesses from 2 to 20 mm. TECHNICAL DATA: Where to use: on walls for ceramic and natural stone coatings. Workability time: 2-3…
Smoothing mortar for internal and external walls and ceilings for thicknesses…
Quick-drying, thixotropic, cementitious smoothing compound for thicknesses from 1 to 20 mm, including on vertical surfaces. TECHNICAL DATA: Where to use: internal floors and walls for ceramic,…
Quick-drying, thixotropic, cementitious smoothing compound for thicknesses from…
Two-component epoxy primer with fillers. May be coloured with MAPECOLOR PASTE. TECHNICAL DATA: Mixing ratio: component A : component B = 80 : 20. Colour of mix: neutral. Consistency of the mix:…
Two-component epoxy primer with fillers. May be coloured with MAPECOLOR PASTE.…
Special normal-setting, quick-drying (4 days), controlled-shrinkage hydraulic binder for screeds. TECHNICAL DATA: Recommended mixing ratio: 200÷250 kg of TOPCEM with 1 m³ of aggregates (diameter from…
Special normal-setting, quick-drying (4 days), controlled-shrinkage hydraulic…
Ready-to-use, normal-setting, controlled-shrinkage mortar with high thermal efficiency for quick-drying (4 days) screeds. TECHNICAL DATA: Mixing ratio: 1 25 kg bags of TOPCEM PRONTO with 1.7 litres…
Ready-to-use, normal-setting, controlled-shrinkage mortar with high thermal…
ULTRACOLOR PLUS is a high performance, quick-setting and drying cementitious mortar for grouting joints up to 20 mm wide. The range of colours of ULTRACOLOR PLUS grouts brings out the beauty of any…
ULTRACOLOR PLUS is a high performance, quick-setting and drying cementitious…