Project 48 Restaurant & Bar, Kecskemét


Yard	Installation of ceramic tiles
Location	Kecskemét, Hungary
Subcategory	RESTAURANT
Application	Installation of ceramic tiles
Start and finish date	2014/2015
Application Type	Floor/wall coverings
Contractor company	Kecskemét Generál
Installer companies	Otti-Manufactura LLC
MAPEI Distributor	Otti-Manufactura Kft.
Credits	Mário Bere
MAPEI Coordination	Mihály Juhász

ADESILEX P9

High-performance cementitious adhesive with no vertical slip and extended open time for ceramic tiles and stone materials. The white version has very high white balance and excellent workability.

High-performance cementitious adhesive with no vertical slip and extended open…

Pre-blended, high-performance polymer-modified cementitious mortar for grouting joints 4 to 15 mm wide. TECHNICAL DATA: Pot life of mix: approx. 2 hours. Waiting time before finishing: 10-20 minutes.…

Pre-blended, high-performance polymer-modified cementitious mortar for grouting…

KERAFLEX MAXI S1

High performance, deformable cementitious adhesive with extended open time and no vertical slip, for ceramic and vitrified tiles and stone material, also suitable for the installation of large-size…

High performance, deformable cementitious adhesive with extended open time and…

KERANET

Acid-based cleaning solution for ceramic tiles. Particularly recommended for eliminating lime efflorescence and for the final cleaning step of Tuscany terracotta. In powder (concentrated) or liquid…

Acid-based cleaning solution for ceramic tiles. Particularly recommended for…

MAPELASTIC FOUNDATION

Two-component, flexible cementitious mortar for waterproofing concrete surfaces subject to negative and positive hydraulic lift. TECHNICAL DATA: Consistency: thixotropic. Mixing ratio: comp. A: comp.…

Two-component, flexible cementitious mortar for waterproofing concrete surfaces…

MAPELUX LUCIDA

Double-reticulation, high-strength shiny metallic wax. TECHNICAL DATA: Appearance: emulsion. Colour: bluish-white. Application temperature range: from +10°C to +30°C. pH: 8.4 ± 0.2. Storage: 12…

Double-reticulation, high-strength shiny metallic wax. TECHNICAL DATA:…

MAPELUX OPACA

Double-reticulating, high-strength matt metallic wax. TECHNICAL DATA: Appearance: emulsion. Colour: bluish-white. Application temperature range: from +10°C to +30°C. pH: 8.4 ± 0.2. Storage: 12 months…

Double-reticulating, high-strength matt metallic wax. TECHNICAL DATA:…

MAPENET 150

Alkali-resistant glass fibre mesh (in compliance with the ETAG 004 guide) for reinforcing protective waterproofing layers, anti-fracture membranes and thermal insulation systems. TECHNICAL DATA:…

Alkali-resistant glass fibre mesh (in compliance with the ETAG 004 guide) for…

MAPESIL LM

Neutral silicone mould-resistant sealant with BioBlock ® technology for stone for movements up to 25%. TECHNICAL DATA: Movement in service: 25%. Modulus of elasticity at 100% elongation: 0.35 N/mm².…

Neutral silicone mould-resistant sealant with BioBlock ® technology for stone…

PRIMER G

Synthetic resin primer in water dispersion with a very low content of volatile organic compounds (VOC). TECHNICAL DATA: Consistency: liquid. Colour: blue. Dilution rate: from 1:1 to 1: 3 with water…

Synthetic resin primer in water dispersion with a very low content of volatile…

ULTRACOLOR PLUS

High-performance, anti-efflorescence, quick-setting and drying polymer-modified mortar with water-repellent DropEffect ® and mould-resistant BioBlock ® technology for grouting joints 2 to 20 mm wide.…

High-performance, anti-efflorescence, quick-setting and drying polymer-modified…