Calibrated silica sand to improve the bond on resin or epoxy primers. TECHNICAL DATA: Colours: grey - beige. Grain size: 0.7-1.2. Packaging: 25 kg bags.
Calibrated silica sand to improve the bond on resin or epoxy primers. TECHNICAL…
Conductive adhesive in water dispersion with permanent tack. Tiles can be removed and replaced several times. Where to use: Internal bonding on absorbent substrates of conductive carpet and PVC…
Conductive adhesive in water dispersion with permanent tack. Tiles can be…
Two-component, water-based base coat, enhancing wood natural beauty and warmth, with very low emission of volatile organic compounds (VOC) and no NMP, for wooden floors. Where to use: Preparation of…
Two-component, water-based base coat, enhancing wood natural beauty and warmth,…
Nitro-cellulose based binder in solvents, mixed with sawdust for grouting wooden floors. Also suitable for sealing large cracks. Where to use: Grouting and preparing traditional wooden floors, both…
Nitro-cellulose based binder in solvents, mixed with sawdust for grouting…
Two-component, fireproof polyurethane vaont to comply with class 1 fire reaction certification for wooden floors according to UNI 9796/CNVVF/CCI Standards, as outlined in D.M. 06/03/92. Where to use:…
Two-component, fireproof polyurethane vaont to comply with class 1 fire…
Two-component, water-based polyurethane varnish, with an extremely low emission level of volatile organic compounds (VOC) and no NMP, highly resistant to wear and abrasion, for wooden floors.…
Two-component, water-based polyurethane varnish, with an extremely low emission…
Two-component water-based base coat, with very low emission of volatile organic compounds (VOC) and no NMP, for wooden floors. Where to use: Preparation of traditional wooden floors, both…
Two-component water-based base coat, with very low emission of volatile organic…
One-component, water-based polyurethane varnish, with extremely low emission levels of volatile organic compounds (VOC) and no NMP, highly resistant to wear and abrasion, for wooden floors. Suitable…
One-component, water-based polyurethane varnish, with extremely low emission…
One-component primer for polyurethane sealants for absorbent substrates. Technical data: Application of sealant: after 60 minutes. Colour: transparent straw yellow. Consumption: 6-9 g/m (1 cm - deep…
One-component primer for polyurethane sealants for absorbent substrates.…
High performance cementitious mortar, for grouting joints of 4 to 20 mm in stone or ceramic industrial floors which are subject to considerable loads. Applications: Internal and external grouting of…
High performance cementitious mortar, for grouting joints of 4 to 20 mm in…
Pre-blended mono-granular, pozzolanic drainage mortar for screeds and for laying traditional paved floors. Applications: - Creation of mortar drainage beds with a minimum thickness of 2 cm (4 cm in…
Pre-blended mono-granular, pozzolanic drainage mortar for screeds and for…
Three-component hydrophilic gel for consolidating the ground and for injecting concrete barriers. TECHNICAL DATA: Consistency: comp A (liquid), comp B (liquid), comp C (solid). Viscosity of mix…
Three-component hydrophilic gel for consolidating the ground and for injecting…
Fine-grained thixotropic, fibre-reinforced, controlled-shrinkage, medium-strength (30 N/mm2) mortar for repairing concrete Where to use To repair the concrete cover on deteriorated concrete…
PVC waterproofing and isolating sheet reinforced with glass fibres, for laying internal resilient and fabric floors on substrates which have cracks, which are particularly dirty or damp or which are…
PVC waterproofing and isolating sheet reinforced with glass fibres, for laying…
Air-entraining agent for concrete and cementitious mortars Where to use Mapeplast PT2 can be used effectively in the following ways: • for producing durable concrete exposed to temperature changes…
Air-entraining agent for concrete and cementitious mortars Where to use…
