Ready-to-use adhesive paste with no vertical slip and long open time for ceramic tiles (thickness of adhesive up to 5 mm). TECHNICAL DATA: Where to use: walls only. Open time: ≥ 30 minutes. Waiting…
Ready-to-use adhesive paste with no vertical slip and long open time for…
Double-buttering elastomeric adhesive in water dispersion with very low emission level of volatile organic compounds (VOC) for laying natural cork floors and walls which need to stick immediately.…
Double-buttering elastomeric adhesive in water dispersion with very low…
Light coloured acrylic adhesive in water dispersion for the installation of conductive flooring. Where to use: Internal bonding of conductive flooring in: • all areas where electrostatic charges may…
Light coloured acrylic adhesive in water dispersion for the installation of…
Acrylic adhesive in water dispersion with very low emission level of volatile organic compounds (VOC) which forms a tough bond even after being left open for a long time, for laying rubber, PVC,…
Acrylic adhesive in water dispersion with very low emission level of volatile…
Admixture to make epoxy and polyurethane products thicker with a thixotropic consistency. TECHNICAL DATA: Appearance: powder. Colour: white. Density: 960 kg/m³. Consumption: 1.5-5% by weight on the…
Admixture to make epoxy and polyurethane products thicker with a thixotropic…
Stud for fixing insulating panels and composite insulating systems in place, with a plug with a metal/nylon pin and polypropylene body. TECHNICAL DATA: Composition: synthetic material with…
Stud for fixing insulating panels and composite insulating systems in place,…
Mono-filament, virgin polypropylene fibres with a length of 12 and 18 mm, for concrete Where to use: Mapefibre NS12 is particularly suitable for the following: production of concrete used for…
Mono-filament, virgin polypropylene fibres with a length of 12 and 18 mm, for…
Transpirant, water-repellent, scratch-effect, trowelable siloxane coating product with good defect covering properties for internal and external surfaces. Available in the following granulometries:…
Transpirant, scratch-effect silicate coating product with defect-covering properties for internal and external surfaces, according to DIN 18363 Standards. Available in the following granulometries:…
Transpirant, scratch-effect silicate coating product with defect-covering…
Chloride-free antifreeze for cementitious mortars and concrete. Antifreeze S is used to prepare mortars and concrete (including reinforced) for use at ambient temperature as low as to -10°C.…
Chloride-free antifreeze for cementitious mortars and concrete. Antifreeze S is…
Pre-blended, ready-to-use industrial hardener for concrete floors made from special quartz in a granulometric curve, Portland cement and special additives. TECHNICAL DATA: Colour of mix: light grey,…
Pre-blended, ready-to-use industrial hardener for concrete floors made from…
Salt-resistant, fine-grained lime- and Eco-Pozzolan-based transpirant smoothing mortars applied on lime-based renders. Respectively available in white and light pink. Mape-Antique FC is a…
Salt-resistant, fine-grained lime- and Eco-Pozzolan-based transpirant smoothing…
