Two-component epoxy binder for trowelled mortar or bonding promoter for resin coatings. TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 100 : 50. Colour of mix: transparent straw-coloured.…
Two-component epoxy binder for trowelled mortar or bonding promoter for resin…
Two-component, polyurethane finishing product in water dispersion with low yellowing properties, for anti-dust and anti-oil treatments. TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 87 : 13.…
Two-component, polyurethane finishing product in water dispersion with low…
Two-component, high-flexibility cementitious mortar (with crack-bridging> 2 mm), applied by trowel or with a roller, for waterproofing balconies, terraces, bathrooms and swimming pools. TECHNICAL…
Agent applied by injection made from micro-emulsion, concentrated silane and siloxane used to form a chemical barrier against capillary rising damp in masonry. TECHNICAL DATA: Dimension of particles:…
Agent applied by injection made from micro-emulsion, concentrated silane and…
Super-plasticising sulphonated naphthalene admixtures for concrete. Permits the amount of mixing water to be drastically reduced, with a considerable increase in strength, even after short curing…
Super-plasticising sulphonated naphthalene admixtures for concrete. Permits the…
Super-fluid, salt-resistant, lime and ECO-POZZOLAN-based, hydraulic binder with fillers applied by injection for consolidating masonry. TECHNICAL DATA: Maximum diameter of aggregate: 100 µm. Mixing…
Super-fluid, salt-resistant, lime and ECO-POZZOLAN-based, hydraulic binder with…
Solvent-based high-penetration consolidating primer to even out surfaces. TECHNICAL DATA: Consistency: fluid liquid. Colour: transparent. Density (EN ISO 2811-1) (g/cm³): approx. 0.96. Dry solids…
Solvent-based high-penetration consolidating primer to even out surfaces.…
One-component, large-grained cementitious mortar for bonding and levelling insulation panels and for thermal insulation systems. TECHNICAL DATA: Consistency: powder. Colour: grey and white Density of…
One-component, large-grained cementitious mortar for bonding and levelling…
Hi-flow, steel fibre-reinforced compensated-shrinkage, quick-setting and hardening, high-ductility cementitious mortar applied at temperatures down to -5°C, with stiff steel fibres for repairing…
Quick-setting and hardening, compensated-shrinkage hi-flow mortar for repairing concrete and fixing drains, manholes and urban architectural fittings in place. TECHNICAL DATA: Maximum dimension of…
Quick-setting and hardening, compensated-shrinkage hi-flow mortar for repairing…
One-component, anti-corrosion cementitious mortar for steel reinforcement rods. TECHNICAL DATA: Maximum dimension of aggregate: 0.5 mm. Mixing ratio: 100 parts of MAPEFER 1K with 20-22 parts of…
One-component, anti-corrosion cementitious mortar for steel reinforcement rods.…
Mould-resistant acetic silicone sealant for sanitary fittings for movements up to 20%. TECHNICAL DATA: Movement in service: 20%. Modulus of elasticity at 100% elongation: 0.36 N/mm². Shore A…
Mould-resistant acetic silicone sealant for sanitary fittings for movements up…
Two-component, thixotropic epoxy adhesive with modified rheology for bonding MAPEBAND, MAPEBAND TPE, PVC strips and Hypalon and for structural bonds. TECHNICAL DATA: Mixing ratio: comp. A : comp. B =…
Two-component, thixotropic epoxy adhesive with modified rheology for bonding…
Two-component, super-fluid epoxy resin for injections and anchorings. TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 4 : 1. Pot life of mix: 40 minutes (at +23°C). Classification: EN 1504-5 and EN…
Two-component, super-fluid epoxy resin for injections and anchorings. TECHNICAL…
High viscosity ultra rapid setting two-component polyurethane resin, to be injected for consolidating and waterproofing of structures subject to strong water ingress Where to use • Waterproofing rock…
High viscosity ultra rapid setting two-component polyurethane resin, to be…
