Highly-decorative, fine-grained, silicate mineral coating product in paste form with high chemical resistance for internal and external surfaces, according to DIN 18363 Standards. TECHNICAL DATA:…
Highly-decorative, fine-grained, silicate mineral coating product in paste form…
Highly transpirant, thick-layered silicate coating product with high filling properties for internal and external surfaces in compliance with DIN 18363. Available in the following granulometries: 0.7…
Highly transpirant, thick-layered silicate coating product with high filling…
Thixotropic detergent for cleaning surfaces damaged by graffiti. TECHNICAL DATA: Consistency: liquid gel. Colour: straw yellow. Density (EN ISO 2811-1) (g/cm³): approx. 0.85. Application: brush.…
Thixotropic detergent for cleaning surfaces damaged by graffiti. TECHNICAL…
Highly-transpirant silicate paint with a high chemical bond for internal and external surfaces, according to DIN 18363 Standards. TECHNICAL DATA: Consistency: thick liquid. Colour: white or various…
Highly-transpirant silicate paint with a high chemical bond for internal and…
Cementitious binder for manufacturing dimensionally stable self-compacting concrete mixtures to repair concrete structures. Stabilcem SCC is used to manufacture concretes with different aggregate…
Cementitious binder for manufacturing dimensionally stable self-compacting…
One-component pre-blended thixotropic mortar with controlled shrinkage for anchoring, by injection, of tie rods and bolts in all types of grounds. Use Stabilcem T for anchoring tie rods of any length…
One-component pre-blended thixotropic mortar with controlled shrinkage for…
Expansive, super-fluid cementitious binder for mixing injection slurry, mortar and concrete. TECHNICAL DATA: Mixing ratio: – injection slurry: 100 parts of STABILCEM with 32 parts of water; – mortar,…
Expansive, super-fluid cementitious binder for mixing injection slurry, mortar…
High performance, fast setting cementitious adhesive with no vertical slip and high chemical resistance for the installation of ceramic floor and wall tiles in water purification plants and sewerage…
High performance, fast setting cementitious adhesive with no vertical slip and…
High-strength, quick-setting pozzolan mortar with very low water absorption for grouting paved floors with joints from 5 to 30 mm wide subject to heavy loads and intense traffic. TECHNICAL DATA: Pot…
High-strength, quick-setting pozzolan mortar with very low water absorption for…
Coloured acrylic undercoat with a smooth finish and good filling and adhesion promoting properties, for internal and external surfaces. TECHNICAL DATA: Consistency: thick liquid. Colour: white or…
Coloured acrylic undercoat with a smooth finish and good filling and adhesion…
Hydro-expanding bentonite jointing material for sealing construction joints. TECHNICAL DATA: Shape: pre-formed tape. Size: 20x25 mm. Storage: 24 months. Application temperature range: from -5°C to…
Hydro-expanding bentonite jointing material for sealing construction joints.…
Easy-to-apply, two-component, anti-acid epoxy mortar with good cleanability properties for grouting joints at least 3 mm wide. TECHNICAL DATA: Pot life of mix: 45 minutes. Set to light foot traffic:…
Easy-to-apply, two-component, anti-acid epoxy mortar with good cleanability…
Two-component epoxy adhesive with no vertical slip for ceramic tiles and stone material. TECHNICAL DATA: Pot life of mix: 45 minutes. Open time: 60 minutes. Set to light foot traffic: approx. 10-12…
Two-component epoxy adhesive with no vertical slip for ceramic tiles and stone…
Synthetic latex rubber mixed with sand and cement (thickness up to 5 mm). TECHNICAL DATA: Pot life of mix: 90 minutes. Open time: 20 minutes. Waiting time before grouting: - on walls: 4-6 hours; - on…
Synthetic latex rubber mixed with sand and cement (thickness up to 5 mm).…
Two-component epoxy primer with fillers. May be coloured with MAPECOLOR PASTE. TECHNICAL DATA: Mixing ratio: component A : component B = 80 : 20. Colour of mix: neutral. Consistency of the mix:…
Two-component epoxy primer with fillers. May be coloured with MAPECOLOR PASTE.…
Waterproof, easy-to-clean acrylic paint for internal and external surfaces in permanent contact with water. TECHNICAL DATA: Consistency: thick liquid. Colour: colours from the colour chart range…
Waterproof, easy-to-clean acrylic paint for internal and external surfaces in…
