Two-component, solvent-free epoxy primer used as bonding promoter for products from the MAPEFLOOR range, for consolidating and waterproofing against residual damp on cementitious substrates and as…
Two-component, solvent-free epoxy primer used as bonding promoter for products…
Two-component, solvent-free, low-viscosity, epoxy primer with a very low emission level of volatile organic compounds for consolidating and waterproofing cementitious substrates. TECHNICAL DATA:…
Two-component, solvent-free, low-viscosity, epoxy primer with a very low…
One-component primer for sealants applied on plastics. TECHNICAL DATA: Application of sealant: after 20’. Colours: transparent. Application: brush. Consumption: 150 g/m² (10-50 g/metre of treated 1…
One-component primer for sealants applied on plastics. TECHNICAL DATA:…
Ready-to-use synthetic resin based solvent primer for bonding with Adesilex PA. Where to use: Preparation of substrates before the laying of wooden flooring with Adesilex PA adhesive. Primer PA dries…
Ready-to-use synthetic resin based solvent primer for bonding with Adesilex PA.…
Moisture curing polyurethane resin for consolidating and waterproofing damp screeds. TECHNICAL DATA: Consistency: liquid. Colour: brown. Dilution ratio: from 25 to 100% with THINNER PU. Set to light…
Moisture curing polyurethane resin for consolidating and waterproofing damp…
Waterproofing primer in water dispersion. TECHNICAL DATA: Consistency: liquid. Colour: pink. Waiting time between each coat: 20-30 minutes. Waiting time before laying coating: approx. 12 hours.…
Waterproofing primer in water dispersion. TECHNICAL DATA: Consistency: liquid.…
Two-component epoxy primer with fillers. May be coloured with MAPECOLOR PASTE. TECHNICAL DATA: Mixing ratio: component A : component B = 80 : 20. Colour of mix: neutral. Consistency of the mix:…
Two-component epoxy primer with fillers. May be coloured with MAPECOLOR PASTE.…
Water-based, solvent-free consolidator with high penetration properties for cementitious substrates. TECHNICAL DATA: Consistency: liquid. Colour: transparent. Drying time: according to the absorbency…
Water-based, solvent-free consolidator with high penetration properties for…
Solvent gel for removing adhesive and paint. TECHNICAL DATA: Consistency: gel. Colour: transparent. Inflammable: yes. Application temperature range: from +10°C to +35°C. Removal time: – adhesives in…
Solvent gel for removing adhesive and paint. TECHNICAL DATA: Consistency: gel.…
Two-component, solvent-free, pure polyurea membrane applied by spray with a high-pressure, bi-mixer type pump, to form waterproof coatings directly on site. TECHNICAL DATA: A/B ratio (by volume):…
Two-component, solvent-free, pure polyurea membrane applied by spray with a…
Keep in touch
