Products for cleaning, maintaining and protecting surfaces
The natural ally for surfaces is how well they are maintained. Once a surface has been created, designed and installed, regular maintenance is indispensable to safeguard its performance properties and aesthetic qualities. Mapei offers a series of products to cover the needs of various types of surface to help preserve their functionality and beauty over time.
Product selector for cleaning, maintaining and protecting surfaces
Find the perfect solution for your cleaning and maintenance needs in just a few clicks
Two-component, water-based base coat, enhancing wood natural beauty and warmth, with very low emission of volatile organic compounds (VOC) and no NMP, for wooden floors. Where to use: Preparation of…
Two-component, water-based base coat, enhancing wood natural beauty and warmth,…
Nitro-cellulose based binder in solvents, mixed with sawdust for grouting wooden floors. Also suitable for sealing large cracks. Where to use: Grouting and preparing traditional wooden floors, both…
Nitro-cellulose based binder in solvents, mixed with sawdust for grouting…
Two-component, fireproof polyurethane vaont to comply with class 1 fire reaction certification for wooden floors according to UNI 9796/CNVVF/CCI Standards, as outlined in D.M. 06/03/92. Where to use:…
Two-component, fireproof polyurethane vaont to comply with class 1 fire…
Two-component, water-based polyurethane varnish, with an extremely low emission level of volatile organic compounds (VOC) and no NMP, highly resistant to wear and abrasion, for wooden floors.…
Two-component, water-based polyurethane varnish, with an extremely low emission…
Two-component water-based base coat, with very low emission of volatile organic compounds (VOC) and no NMP, for wooden floors. Where to use: Preparation of traditional wooden floors, both…
Two-component water-based base coat, with very low emission of volatile organic…
One-component, water-based polyurethane varnish, with extremely low emission levels of volatile organic compounds (VOC) and no NMP, highly resistant to wear and abrasion, for wooden floors. Suitable…
One-component, water-based polyurethane varnish, with extremely low emission…
One-component primer for polyurethane sealants for absorbent substrates. Technical data: Application of sealant: after 60 minutes. Colour: transparent straw yellow. Consumption: 6-9 g/m (1 cm - deep…
One-component primer for polyurethane sealants for absorbent substrates.…
High performance cementitious mortar, for grouting joints of 4 to 20 mm in stone or ceramic industrial floors which are subject to considerable loads. Applications: Internal and external grouting of…
High performance cementitious mortar, for grouting joints of 4 to 20 mm in…
Pre-blended mono-granular, pozzolanic drainage mortar for screeds and for laying traditional paved floors. Applications: - Creation of mortar drainage beds with a minimum thickness of 2 cm (4 cm in…
Pre-blended mono-granular, pozzolanic drainage mortar for screeds and for…
Three-component hydrophilic gel for consolidating the ground and for injecting concrete barriers. TECHNICAL DATA: Consistency: comp A (liquid), comp B (liquid), comp C (solid). Viscosity of mix…
Three-component hydrophilic gel for consolidating the ground and for injecting…
Fine-grained thixotropic, fibre-reinforced, controlled-shrinkage, medium-strength (30 N/mm2) mortar for repairing concrete Where to use To repair the concrete cover on deteriorated concrete…
PVC waterproofing and isolating sheet reinforced with glass fibres, for laying internal resilient and fabric floors on substrates which have cracks, which are particularly dirty or damp or which are…
PVC waterproofing and isolating sheet reinforced with glass fibres, for laying…
Air-entraining agent for concrete and cementitious mortars Where to use Mapeplast PT2 can be used effectively in the following ways: • for producing durable concrete exposed to temperature changes…
Air-entraining agent for concrete and cementitious mortars Where to use…
Retardant plasticiser for concrete. Mapeplast R14 is used for the production of concrete where a slower rate of cement hydration is required. Mapeplast R14 is suitable for pours in hot weather…
Retardant plasticiser for concrete. Mapeplast R14 is used for the production of…
Multipurpose plasticiser for concrete with a mild retarding effect. Mapemix R64 is used to manufacture concrete with high fluidity if used in large quantities (consistency class S4 and S5 according…
Multipurpose plasticiser for concrete with a mild retarding effect. Mapemix R64…
Multipurpose plasticiser for concrete. Mapemix N60 is used to manufacture concrete with high fluidity if used in large quantities (consistency class S4 and S5 according to EN 206-1) and a high…
Multipurpose plasticiser for concrete. Mapemix N60 is used to manufacture…
Keep in touch
