Project Waste to energy plant, San Vittore del Lazio


Yard	waterproofing
Location	San Vittore del Lazio, Italy
Subcategory	WATER-SOFTENER
Built in	2011
Opened in	2011
Application	Interior waterproofing
Application Type	Waterproofing systems
Client	E.A.L.L. srl; Gruppo ACEA Spa
Contractor company	L'internazionale Soc. Coop.
Installer companies	TE Srl
Credits	arch. Mario Monardo
Project Manager	ing. Francesco Martino

DYNAMON SR3

Super-plasticizers based on a modified acrylic polymer for ready-mix concrete with low water/cement ratio, extremely high mechanical strength and long slump retention Where to use Dynamon SR3 is…

Super-plasticizers based on a modified acrylic polymer for ready-mix concrete…

IDROSTOP MASTIC

One-component adhesive for laying IDROSTOP. TECHNICAL DATA: Consistency: thixotropic paste. Dry solids content: 100%. Storage: 18 months. Application temperature range: from +5°C to +35°C. Dust dry:…

One-component adhesive for laying IDROSTOP. TECHNICAL DATA: Consistency:…

LAMPOCEM

Ready-to-use, quick-setting and hardening, anti-shrinkage hydraulic binder. TECHNICAL DATA: Maximum dimension of aggregate: < 0.1 mm. Mixing ratio: 100 parts of LAMPOCEM with 20-21 parts of water.…

Ready-to-use, quick-setting and hardening, anti-shrinkage hydraulic binder.…

LAMPOSILEX

Ultra quick-setting and hardening hydraulic binder for blocking seeping water. TECHNICAL DATA: Consistency: fine powder. Workability time at +20°C: approximately 1 minute. Storage: 12 months. Mixing…

Ultra quick-setting and hardening hydraulic binder for blocking seeping water.…

Anti-evaporation agent in water emulsion for protecting the surface of concrete against quickly drying out when exposed to sunlight and winds. TECHNICAL DATA: Application: spray. Consumption: – neat:…

Anti-evaporation agent in water emulsion for protecting the surface of concrete…

MAPEFER 1K ZERO

MAPEFER 1K ZERO is a one-component mortar made from cementitious binders, powdered polymers and corrosion inhibitors and is applied to steel reinforcement to prevent the formation of rust and as an…

MAPEFER 1K ZERO is a one-component mortar made from cementitious binders,…

MAPEGROUT RAPIDO

Fibre-reinforced, quick setting and hardening, compensated-shrinkage mortar for repairing concrete. TECHNICAL DATA: Maximum dimension of aggregate: 1 mm. Mixing ratio: 100 parts of MAPEGROUT FAST-SET…

Fibre-reinforced, quick setting and hardening, compensated-shrinkage mortar for…

MAPEGROUT SV

Quick-setting and hardening, compensated-shrinkage hi-flow mortar for repairing concrete and fixing drains, manholes and urban architectural fittings in place. TECHNICAL DATA: Maximum dimension of…

Quick-setting and hardening, compensated-shrinkage hi-flow mortar for repairing…

MAPELASTIC FOUNDATION

Two-component, flexible cementitious mortar for waterproofing concrete surfaces subject to negative and positive hydraulic lift. TECHNICAL DATA: Consistency: thixotropic. Mixing ratio: comp. A: comp.…

Two-component, flexible cementitious mortar for waterproofing concrete surfaces…

MAPENET 150

Alkali-resistant glass fibre mesh (in compliance with the ETAG 004 guide) for reinforcing protective waterproofing layers, anti-fracture membranes and thermal insulation systems. TECHNICAL DATA:…

Alkali-resistant glass fibre mesh (in compliance with the ETAG 004 guide) for…

MAPEPLAST SF

Silica fume-based admixture with pozzolanic action Where to use Mapeplast SF can be used for the following applications: • High quality thixotropic mortar, resistant even under the most severe…

Silica fume-based admixture with pozzolanic action Where to use Mapeplast SF…

MAPEPROOF

Bentonite waterproofing sheets for structures below ground level, suitable for both horizontal and vertical surfaces. TECHNICAL DATA: Lower layer of geo-textile fabric: polypropylene fabric, 140…

Bentonite waterproofing sheets for structures below ground level, suitable for…

MAPEPROOF MASTIC

Bentonite paste made from natural sodium bentonite and plasticising additives for sealing elements which pass through surfaces. TECHNICAL DATA: Density: 1.50 kg/dm³. Composition: – 50% natural sodium…

Bentonite paste made from natural sodium bentonite and plasticising additives…

PLANITOP FAST 330

Quick-setting, fibre-reinforced cementitious levelling mortar for internal and external floors and walls, applied in layers from 3 to 30 mm to even out irregularities. TECHNICAL DATA: Where to use:…

Quick-setting, fibre-reinforced cementitious levelling mortar for internal and…

DURESIL EB

Product not available for this market,
contact us

IDROSTOP B25

Product not available for this market,
contact us

MAPEGROUT COMPACT

Product not available for this market,
contact us

MAPEPROOF LW

Product not available for this market,
contact us

Waste to energy plant

Construction

Browse the project Gallery

Product used for the project

Keep in touch