High-performance cementitious adhesive with no vertical slip and extended open time for ceramic tiles and stone materials (layer of adhesive up to 5 mm). The white version has very high white balance…
High-performance cementitious adhesive with no vertical slip and extended open…
Elastomeric, crack-bridging, permanently flexible, protective paint with high resistance to chemicals for internal and external surfaces. TECHNICAL DATA: Consistency: thick liquid. Colour: white or…
Elastomeric, crack-bridging, permanently flexible, protective paint with high…
Polymer liquid admix for KERACOLOR FF, KERACOLOR GG and KERACOLOR SF. TECHNICAL DATA OF FUGOLASTIC + KERACOLOR: Pot life of mix: approx. 2 hours. Waiting time before finishing: 10-20 minutes. Set to…
Polymer liquid admix for KERACOLOR FF, KERACOLOR GG and KERACOLOR SF. TECHNICAL…
Two-component, high-performance, deformable, quick-setting and drying cementitious adhesive for ceramic tiles and stone material (thickness of adhesive up to 10 mm). TECHNICAL DATA: Consistency:…
Two-component, high-performance, deformable, quick-setting and drying…
Osmotic cementitious mortar suitable for contact with drinking water for waterproofing masonry and concrete structures. TECHNICAL DATA: Consistency: powder. Pot life of mix: approximately 1 hour.…
Osmotic cementitious mortar suitable for contact with drinking water for…
Pre-blended, high-performance, polymer-modified cementitious mortar with water-repellent DropEffect ® technology for grouting joints up to 6 mm wide. TECHNICAL DATA: Pot life of mix: approx. 2 hours.…
Two-component, high-performance, anti-acid epoxy mortar and adhesive with no vertical slip for laying and grouting ceramic tiles and stone material (minimum width of joints 3 mm). TECHNICAL DATA: Pot…
Two-component, high-performance, anti-acid epoxy mortar and adhesive with no…
Cementitious adhesive for ceramic tiles (thickness of adhesive up to 5 mm). TECHNICAL DATA: Pot life of mix: 6-8 hours. Open time: 20 minutes. Waiting time before grouting: – on walls: 3-6 hours; –…
Cementitious adhesive for ceramic tiles (thickness of adhesive up to 5 mm).…
Ultra quick-setting and hardening hydraulic binder for blocking seeping water. TECHNICAL DATA: Consistency: fine powder. Workability time at +20°C: approximately 1 minute. Storage: 12 months. Mixing…
Ultra quick-setting and hardening hydraulic binder for blocking seeping water.…
Water-based acrylic undercoat and bonding promoter with a smooth finish. TECHNICAL DATA: Consistency: fluid liquid. Colour: transparent. Density (EN ISO 2811-1) (g/cm³): approx. 1.01. Dry solids…
Water-based acrylic undercoat and bonding promoter with a smooth finish.…
Fibre-reinforced, compensated-shrinkage mortar for repairing concrete. TECHNICAL DATA: Maximum dimension of aggregate: 2.5 mm. Mixing ratio: 100 parts of MAPEGROUT TISSOTROPICO with 15.5-16.5 parts…
Fibre-reinforced, compensated-shrinkage mortar for repairing concrete.…
Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for movements up to 25%. TECHNICAL DATA: Movement in service: 25%. Modulus of elasticity at 100% elongation: 0.35 N/mm².…
Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for…
ULTRACOLOR PLUS is a high performance, quick-setting and drying cementitious mortar for grouting joints up to 20 mm wide. The range of colours of ULTRACOLOR PLUS grouts brings out the beauty of any…
ULTRACOLOR PLUS is a high performance, quick-setting and drying cementitious…