Project NH Hoteles Olomouc, Olomouc


Yard	new hotel
Location	Olomouc, Czech Republic
Subcategory	HOTEL/INN
Built in	2009
Opened in	2010
Application	floor coverings, concrete reparation, waterproofing
Application Type	New building
Installer companies	GEMO Olomouc

ADESILEX P9

High-performance cementitious adhesive with no vertical slip and extended open time for ceramic tiles and stone materials (layer of adhesive up to 5 mm). The white version has very high white balance…

High-performance cementitious adhesive with no vertical slip and extended open…

KERACOLOR FF

Pre-blended, high-performance, polymer-modified cementitious mortar with water-repellent DropEffect ® technology for grouting joints up to 6 mm wide. TECHNICAL DATA: Pot life of mix: approx. 2 hours.…

Pre-blended, high-performance, polymer-modified cementitious mortar with…

KERALASTIC T

Two-component, high-performance polyurethane adhesive with no vertical slip for ceramic tiles and stone material. TECHNICAL DATA: Open time: 50 minutes. Waiting time before grouting: 12 hours. Set to…

Two-component, high-performance polyurethane adhesive with no vertical slip for…

KERAPOXY

Two-component, high-performance, anti-acid epoxy mortar and adhesive with no vertical slip for laying and grouting ceramic tiles and stone material (minimum width of joints 3 mm). TECHNICAL DATA: Pot…

Two-component, high-performance, anti-acid epoxy mortar and adhesive with no…

MAPECEM PRONTO

Pre-blended, ready-to-use, quick-setting and drying (24 hours), controlled-shrinkage mortar for screeds. TECHNICAL DATA: Mixing ratio: 1 25 kg bags of MAPECEM PRONTO with approximately 2.2 litres of…

Pre-blended, ready-to-use, quick-setting and drying (24 hours),…

MAPEFINISH

Two-component cementitious mortar for finishing concrete. TECHNICAL DATA: Maximum dimension of aggregate: 0.4 mm. Mixing ratio: 4 parts of MAPEFINISH comp. A with 1 part of MAPEFINISH comp. B. Pot…

Two-component cementitious mortar for finishing concrete. TECHNICAL DATA:…

MAPEFLEX PU50 SL

Paintable, castable polyurethane sealant with a low modulus of elasticity for movements up to 25%. TECHNICAL DATA: Movement in service: 25%. Modulus of elasticity at 100% elongation: 0.25 N/mm².…

Paintable, castable polyurethane sealant with a low modulus of elasticity for…

MAPEFOAM

Closed-cell, extruded foam polyethylene cord used as a support for elastomer sealants to gauge the correct size of flexible joints. Supplied in rolls in various lengths according to the diameter of…

Closed-cell, extruded foam polyethylene cord used as a support for elastomer…

MAPEGROUT TISSOTROPICO

Fibre-reinforced, compensated-shrinkage mortar for repairing concrete. TECHNICAL DATA: Maximum dimension of aggregate: 2.5 mm. Mixing ratio: 100 parts of MAPEGROUT TISSOTROPICO with 15.5-16.5 parts…

Fibre-reinforced, compensated-shrinkage mortar for repairing concrete.…

MAPEGUM WPS

Quick-drying flexible liquid membrane for waterproofing internal surfaces. TECHNICAL DATA: Consistency: paste. Density of the mix: 1.45 g/cm³. pH: 9. Dry solids content: 73%. Storage: 24 months.…

Quick-drying flexible liquid membrane for waterproofing internal surfaces.…

MAPELASTIC

Two-component, flexible cementitious mortar for waterproofing balconies, terraces, bathrooms and swimming pools. TECHNICAL DATA: Consistency of mix: plastic-trowable. Mixing ratio: comp. A: comp. B =…

Two-component, flexible cementitious mortar for waterproofing balconies,…

MAPESIL AC

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for movements up to 25%. TECHNICAL DATA: Movement in service: 25%. Modulus of elasticity at 100% elongation: 0.35 N/mm².…

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for…

NIVORAPID

Quick-drying, thixotropic, cementitious smoothing compound for thicknesses from 1 to 20 mm, including on vertical surfaces. TECHNICAL DATA: Where to use: internal floors and walls for ceramic,…

Quick-drying, thixotropic, cementitious smoothing compound for thicknesses from…

PLANICRETE

Synthetic rubber latex to improve adhesion of cement mixes. TECHNICAL DATA: Consistency: fluid liquid. Dry solids content: 36%. Storage: 24 months. Consumption: – for adhesive slurry: 100-150 g/m²; –…

Synthetic rubber latex to improve adhesion of cement mixes. TECHNICAL DATA:…

TOPCEM PRONTO

Ready-to-use, normal-setting, controlled-shrinkage mortar with high thermal efficiency for quick-drying (4 days) screeds. TECHNICAL DATA: Mixing ratio: 1 25 kg bags of TOPCEM PRONTO with 1.7 litres…

Ready-to-use, normal-setting, controlled-shrinkage mortar with high thermal…

ULTRACOLOR PLUS

ULTRACOLOR PLUS is a high performance, quick-setting and drying cementitious mortar for grouting joints up to 20 mm wide. The range of colours of ULTRACOLOR PLUS grouts brings out the beauty of any…

ULTRACOLOR PLUS is a high performance, quick-setting and drying cementitious…