Project Hap Seng Business Park, Shah Alam

Hap Seng Business Park

Shah Alam, Malaysia

Ref #: 60000074

Category: COMMERCIAL FACILITIES

Construction


Yard	exterior floors, interior floors, basement carparks, bathrooms, planter boxes, water feature
Location	Shah Alam, Malaysia
Subcategory	VARIOUS
Built in	2020
Opened in	2020
Application	Waterproofing Solutions for Commercial Buildings
Start and finish date	2018/2020
Application Type	Waterproofing systems
Client	Hap Seng Land Sdn Bhd
Contractor company	Nakano Construction Sdn Bhd
Installer companies	Monarch CC Sdn Bhd
Architects	Asima Archirect Sdn Bhd
MAPEI Coordination	Aaron Ang

Product used for the project

Two-component, high-performance, anti-acid epoxy mortar and adhesive with no vertical slip for laying and grouting ceramic tiles and stone material (minimum width of joints 3 mm). TECHNICAL DATA: Pot…

Two-component, high-performance, anti-acid epoxy mortar and adhesive with no…

MAPEFOAM

Closed-cell, extruded foam polyethylene cord used as a support for elastomer sealants to gauge the correct size of flexible joints. Supplied in rolls in various lengths according to the diameter of…

Closed-cell, extruded foam polyethylene cord used as a support for elastomer…

MAPELASTIC

Two-component, flexible cementitious mortar for waterproofing balconies, terraces, bathrooms and swimming pools. TECHNICAL DATA: Consistency of mix: plastic-trowable. Mixing ratio: comp. A: comp. B =…

Two-component, flexible cementitious mortar for waterproofing balconies,…

MAPELASTIC FOUNDATION

Two-component, flexible cementitious mortar for waterproofing concrete surfaces subject to negative and positive hydraulic lift. TECHNICAL DATA: Consistency: thixotropic. Mixing ratio: comp. A: comp.…

Two-component, flexible cementitious mortar for waterproofing concrete surfaces…

MAPENET 150

Alkali-resistant glass fibre mesh (in compliance with the ETAG 004 guide) for reinforcing protective waterproofing layers, anti-fracture membranes and thermal insulation systems. TECHNICAL DATA:…

Alkali-resistant glass fibre mesh (in compliance with the ETAG 004 guide) for…

PLASTIMUL MY

All-purpose, bituminous emulsion coating TECHNICAL CHARACTERISTICS Plastimul MY is a water-emulsified, thixotropic, bituminous coating which dries to form a flexible, plastic membrane that is…

All-purpose, bituminous emulsion coating TECHNICAL CHARACTERISTICS Plastimul MY…

PRIMER SN

Two-component epoxy primer with fillers. May be coloured with MAPECOLOR PASTE. TECHNICAL DATA: Mixing ratio: component A : component B = 80 : 20. Colour of mix: neutral. Consistency of the mix:…

Two-component epoxy primer with fillers. May be coloured with MAPECOLOR PASTE.…

PURTOP 1000

Two-component, solvent-free, pure polyurea membrane applied by spray with a high-pressure, bi-mixer type pump, to form waterproof coatings directly on site. TECHNICAL DATA: A/B ratio (by volume):…

Two-component, solvent-free, pure polyurea membrane applied by spray with a…