Project Apartments in Viareggio, Viareggio


Yard	new realization
Location	Viareggio, Italy
Subcategory	APARTMENTS
Built in	2010
Opened in	2010
Application	apartments realization
Application Type	Facade interventions
Client	Costruzioni Edil-Ston
Contractor company	Costruzioni Edil-Ston
Installer companies	Costruzioni Edil-Ston
Architects	arch. Stefano Montemagni; geo. Marco Bertelli
MAPEI Distributor	Dini & Denna
Credits	Sergio Fortuna
Project Manager	ing. Angelo Puccinelli

ADESILEX P9

High-performance cementitious adhesive with no vertical slip and extended open time for ceramic tiles and stone materials (layer of adhesive up to 5 mm). The white version has very high white balance…

High-performance cementitious adhesive with no vertical slip and extended open…

ADESILEX PG1

Two-component, rapid-setting thixotropic adhesive for structural bonds. TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 3 : 1. Pot life of mix: 35 minutes (at +23°C). Minimum applicable thickness:…

Two-component, rapid-setting thixotropic adhesive for structural bonds.…

ELASTORAPID

Two-component, high-performance, highly-deformable, quick-setting and drying cementitious adhesive with no vertical slip and extended open time for ceramic tiles and stone material (thickness of…

Two-component, high-performance, highly-deformable, quick-setting and drying…

IDROSTOP MASTIC

One-component adhesive for laying IDROSTOP. TECHNICAL DATA: Consistency: thixotropic paste. Dry solids content: 100%. Storage: 18 months. Application temperature range: from +5°C to +35°C. Dust dry:…

One-component adhesive for laying IDROSTOP. TECHNICAL DATA: Consistency:…

KERACOLOR FF

Pre-blended, high-performance, polymer-modified cementitious mortar with water-repellent DropEffect ® technology for grouting joints up to 6 mm wide. TECHNICAL DATA: Pot life of mix: approx. 2 hours.…

Pre-blended, high-performance, polymer-modified cementitious mortar with…

KERACOLOR SF

Super fine, high performance cementitious grout for joints up to 4 mm. Applications: Easy to apply and finish, smooth and compact, particularly fine, interior and exterior, floor and wall grouting of…

Super fine, high performance cementitious grout for joints up to 4 mm.…

LAMPOCEM

Ready-to-use, quick-setting and hardening, anti-shrinkage hydraulic binder. TECHNICAL DATA: Maximum dimension of aggregate: < 0.1 mm. Mixing ratio: 100 parts of LAMPOCEM with 20-21 parts of water.…

Ready-to-use, quick-setting and hardening, anti-shrinkage hydraulic binder.…

MAPEBAND TPE

TPE tape for flexible sealing and waterproofing of expansion joints and cracks subject to movement.

TPE tape for flexible sealing and waterproofing of expansion joints and cracks…

MAPEFLUID N200

Super-plasticising sulphonated naphthalene admixtures for concrete. Permits the amount of mixing water to be drastically reduced, with a considerable increase in strength, even after short curing…

Super-plasticising sulphonated naphthalene admixtures for concrete. Permits the…

MAPEGROUT BM

Two-component cementitious mortar with a low modulus of elasticity for repairing concrete. TECHNICAL DATA: Maximum dimension of aggregate: 2.5 mm. Mixing ratio: 100 parts of MAPEGROUT BM comp. A with…

Two-component cementitious mortar with a low modulus of elasticity for…

MAPELASTIC

Two-component, flexible cementitious mortar for waterproofing balconies, terraces, bathrooms and swimming pools. TECHNICAL DATA: Consistency of mix: plastic-trowable. Mixing ratio: comp. A: comp. B =…

Two-component, flexible cementitious mortar for waterproofing balconies,…

MAPELASTIC FOUNDATION

Two-component, flexible cementitious mortar for waterproofing concrete surfaces subject to negative and positive hydraulic lift. TECHNICAL DATA: Consistency: thixotropic. Mixing ratio: comp. A: comp.…

Two-component, flexible cementitious mortar for waterproofing concrete surfaces…

MAPENET 150

Alkali-resistant glass fibre mesh (in compliance with the ETAG 004 guide) for reinforcing protective waterproofing layers, anti-fracture membranes and thermal insulation systems. TECHNICAL DATA:…

Alkali-resistant glass fibre mesh (in compliance with the ETAG 004 guide) for…

MAPEPROOF

Bentonite waterproofing sheets for structures below ground level, suitable for both horizontal and vertical surfaces. TECHNICAL DATA: Lower layer of geo-textile fabric: polypropylene fabric, 140…

Bentonite waterproofing sheets for structures below ground level, suitable for…

MAPESIL AC

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for movements up to 25%. TECHNICAL DATA: Movement in service: 25%. Modulus of elasticity at 100% elongation: 0.35 N/mm².…

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for…

MAPESILENT PANEL

Tiles with a bitumen and special polymer-based elasto-plastomeric membrane with polyester reinforcement, sandwiched to a resilient layer of polyester fibre. TECHNICAL DATA: Tensile strength: –…

Tiles with a bitumen and special polymer-based elasto-plastomeric membrane with…

MAPESILENT ROLL

Sheets with a bitumen and special polymer-based elasto-plastomeric membrane with polyester reinforcement sandwiched to a layer of resilient polyester fibre coated with blue, non-woven polypropylene…

Sheets with a bitumen and special polymer-based elasto-plastomeric membrane…

MAPETHERM AR1

One-component cementitious mortar for bonding and levelling insulation panels and for thermal insulation systems. TECHNICAL DATA: Consistency: powder. Colour: grey. Density of the mix (kg/m³): 1,450.…

One-component cementitious mortar for bonding and levelling insulation panels…

MAPETHERM FIX 9

Polyprpoylene fastener. TECHNICAL DATA: Composition: polypropylene. Colour: grey. Sizes available mm: 83. Packaging: boxes of 500 pieces.

Polyprpoylene fastener. TECHNICAL DATA: Composition: polypropylene. Colour:…

MAPETHERM NET

Alkali-resistant glass fibre mesh suitable for reinforced skimming layers when repairing façades, or for the execution of MAPETHERM thermal insulation systems. TECHNICAL DATA: Composition: 100% glass…

Alkali-resistant glass fibre mesh suitable for reinforced skimming layers when…

MAPETHERM PROFIL

Pre-mounted aluminium angle iron incorporated with alkali-resistant glass fibre mesh. TECHNICAL DATA: Composition: aluminium: Colour: grey. Dimensions m: 2.50. Packaging: boxes of 50 pieces.

Pre-mounted aluminium angle iron incorporated with alkali-resistant glass fibre…

PLASTIMUL 1K SUPER PLUS

One-component, solvent-free, quick-drying, low-shrinkage, high-yield, high flexibility bitumen waterproofing emulsion containing polystyrene spheres and rubber granules. TECHNICAL DATA: Consistency:…

One-component, solvent-free, quick-drying, low-shrinkage, high-yield, high…

PRIMER G

Synthetic resin primer in water dispersion with a very low content of volatile organic compounds (VOC). TECHNICAL DATA: Consistency: liquid. Colour: blue. Dilution rate: from 1:1 to 1: 3 with water…

Synthetic resin primer in water dispersion with a very low content of volatile…

SILANCOLOR PITTURA

Transpirant, water-repellent, siloxane paint resistant to aggressive environments for internal and external surfaces. TECHNICAL DATA: Consistency: thick liquid. Colour: white or various colours using…

Transpirant, water-repellent, siloxane paint resistant to aggressive…

ULTRACOLOR PLUS

ULTRACOLOR PLUS is a high performance, quick-setting and drying cementitious mortar for grouting joints up to 20 mm wide. The range of colours of ULTRACOLOR PLUS grouts brings out the beauty of any…

ULTRACOLOR PLUS is a high performance, quick-setting and drying cementitious…