Project András Jósa Hospital, Nyíregyháza


Yard	Installation of ceramic tiles and floors in 40.000 square meters.
Location	Nyíregyháza, Hungary
Subcategory	HOSPITAL
Application	Mapei products were used during the construction of the renovated hospital.
Start and finish date	2014/2015
Application Type	Cementitious & resin flooring systems, Floor/wall coverings
Contractor company	Magyar Építő Zrt., Swietelsky Ltd.
Installer companies	Arc-Tex Ltd.
MAPEI Distributor	Arc-Tex Kft.
Credits	Mário Bere
MAPEI Coordination	András Farkas

ADESILEX P9

High-performance cementitious adhesive with no vertical slip and extended open time for ceramic tiles and stone materials (layer of adhesive up to 5 mm). The white version has very high white balance…

High-performance cementitious adhesive with no vertical slip and extended open…

ECO PRIM GRIP PLUS

Multi-purpose, ready-to-use, low odour, bonding promoter primer with a very low emission of volatile organic compounds (VOC) for render, smoothing and levelling compounds and cementitious adhesives,…

Multi-purpose, ready-to-use, low odour, bonding promoter primer with a very low…

KERACOLOR FF

Pre-blended, high-performance, polymer-modified cementitious mortar with water-repellent DropEffect ® technology for grouting joints up to 6 mm wide. TECHNICAL DATA: Pot life of mix: approx. 2 hours.…

Pre-blended, high-performance, polymer-modified cementitious mortar with…

MAPEFLOOR I 500 W

Two-component, vapour-permeable, neutral-coloured epoxy formulate in water dispersion for industrial floors. May be coloured with MAPECOLOR PASTE. TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 1…

Two-component, vapour-permeable, neutral-coloured epoxy formulate in water…

MAPEGROUT 430

Fine-grained, fibre-reinforced, normal-setting thixotropic mortar for repairing concrete. TECHNICAL DATA: Maximum dimension of aggregate: 1 mm. Mixing ratio: 100 parts of MAPEGROUT 430 with 17.5-18.5…

Fine-grained, fibre-reinforced, normal-setting thixotropic mortar for repairing…

MAPELASTIC

Two-component, flexible cementitious mortar for waterproofing balconies, terraces, bathrooms and swimming pools. TECHNICAL DATA: Consistency of mix: plastic-trowable. Mixing ratio: comp. A: comp. B =…

Two-component, flexible cementitious mortar for waterproofing balconies,…

MAPESIL Z PLUS

Mould-resistant acetic silicone sealant for sanitary fittings for movements up to 20%. TECHNICAL DATA: Movement in service: 20%. Modulus of elasticity at 100% elongation: 0.36 N/mm². Shore A…

Mould-resistant acetic silicone sealant for sanitary fittings for movements up…

PLANIPATCH

Fine-grained, ultra quick-drying, thixotropic cementitious smoothing compound for thicknesses from 0 to 10 mm, including on vertical surfaces. TECHNICAL DATA: Where to use: internal floors and walls…

Fine-grained, ultra quick-drying, thixotropic cementitious smoothing compound…

PRIMER SN

Two-component epoxy primer with fillers. May be coloured with MAPECOLOR PASTE. TECHNICAL DATA: Mixing ratio: component A : component B = 80 : 20. Colour of mix: neutral. Consistency of the mix:…

Two-component epoxy primer with fillers. May be coloured with MAPECOLOR PASTE.…

ULTRABOND 333

Solvent-free adhesive for vinyl and textile floors. TECHNICAL DATA: Consistency: creamy paste. Colour: light beige. Waiting time: 10-20 minutes. Open time: 30-40 minutes. Set to light foot traffic:…

Solvent-free adhesive for vinyl and textile floors. TECHNICAL DATA:…

ULTRABOND ECO V4 SP

Multi-purpose, acrylic adhesive in water dispersion with a long open time and very low emission level of volatile organic compounds (VOC), for laying rubber, PVC, vinyl, polyolephinic, linoleum and…

Multi-purpose, acrylic adhesive in water dispersion with a long open time and…