Pre-impregnated alkali-resistant A.R. glass fibre mesh (FRP) used to make “reinforced” structural render on concrete and masonry structures. TECHNICAL DATA: Type of fibre: A.R. type glass fibre.…
Pre-impregnated alkali-resistant A.R. glass fibre mesh (FRP) used to make…
High-strength carbon fibre mesh for “reinforced” structural strengthening work on masonry and concrete structures. TECHNICAL DATA: Type of fibre: high-strength carbon. Weight: ≥170 g/m². Mesh size:…
High-strength carbon fibre mesh for “reinforced” structural strengthening work…
Admixture for enhancing the pumpability of concrete Where to use Thanks to its special formula, Mapeplast PMX makes the cement mix highly cohesive. Mapeplast PMX is especially recommended for: –…
Admixture for enhancing the pumpability of concrete Where to use Thanks to its…
Three-component epoxy-cementitious primer for non-absorbent waterproofing damp substrates. TECHNICAL DATA: Consistency: comp. A liquid; comp. B liquid; comp. C powder. Colours: comp. A white; comp. B…
Three-component epoxy-cementitious primer for non-absorbent waterproofing damp…
Synthetic-rubber latex for cement mixes Technical Charateristics Planicrete 50 is a water dispersion of a special synthetic elastomer, totally resistant to alkaline saponification. When mixed with…
Synthetic-rubber latex for cement mixes Technical Charateristics Planicrete 50…
Two-component, flexible polyurethane resin-based adhesive and pore filler/smoothing compound for MAPEFLOOR COMFORT SYSTEM AL/X and MAPEFLOOR COMFORT SYSTEM AR/X. Available only upon request.…
Two-component, flexible polyurethane resin-based adhesive and pore…
Two-component epoxy primer in water dispersion for electrically conductive coatings. TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 25 : 75. Colour of mix: black. Consistency of mix: fluid.…
Two-component epoxy primer in water dispersion for electrically conductive…
