Moisture curing polyurethane resin for consolidating and waterproofing damp screeds. TECHNICAL DATA: Consistency: liquid. Colour: brown. Dilution ratio: from 25 to 100% with THINNER PU. Set to light…
Moisture curing polyurethane resin for consolidating and waterproofing damp…
Grout made from special hydraulic binders for sealing micro-porosity which forms after the first polishing phase of ULTRATOP. TECHNICAL DATA: Consistency: fine powder. Colour: white, beige, light…
Grout made from special hydraulic binders for sealing micro-porosity which…
Two-component, water-based toning undercoat with high insulating properties with low emission of volatile organic compounds (VOC), no NMP for preparing solid and pre-sanded wooden floors and wooden…
Two-component, water-based toning undercoat with high insulating properties…
One-component, moisture curing, expansive polyurethane adhesive used by injection, for fastening and repairing parquet elements which are not perfectly bonded to the substrate. TECHNICAL DATA:…
One-component, moisture curing, expansive polyurethane adhesive used by…
Multi-purpose acrylic adhesive in water dispersion with very low emission level of volatile organic compounds (VOC) for vinyl and rubber floors. TECHNICAL DATA: Consistency: creamy paste. Colour:…
Multi-purpose acrylic adhesive in water dispersion with very low emission level…
Solvent-free concentrated bitumen emulsion for treating substrates before applying waterproofing products from the PLASTIMUL line. TECHNICAL DATA: Consistency: paste. Density (g/cm³): approx. 1.1.…
Solvent-free concentrated bitumen emulsion for treating substrates before…
Pre-blended dry-shake hardener for concrete floors made of special aggregates based on corundum, Portland cement and special additives. TECHNICAL DATA: Colour of mix: grey; other colours available on…
Pre-blended dry-shake hardener for concrete floors made of special aggregates…
Bentonite paste made from natural sodium bentonite and plasticising additives for sealing elements which pass through surfaces. TECHNICAL DATA: Density: 1.50 kg/dm³. Composition: – 50% natural sodium…
Bentonite paste made from natural sodium bentonite and plasticising additives…
Chemical-action vegetable oil-based form-release agent in water emulsion to improve exposed surfaces. Particularly suitable for use on horizontal surfaces. Also suitable for steam curing cycles.…
Chemical-action vegetable oil-based form-release agent in water emulsion to…
Chemical-action vegetable oil-based form-release ready-to-use agent in water emulsion to improve exposed surfaces. Particularly suitable for use on vertical surfaces. Also suitable for steam curing…
Chemical-action vegetable oil-based form-release ready-to-use agent in water…
Alkali-resistant, primed basalt-fibre mesh for structural “reinforced” strengthening of stone masonry, brick, tuff and concrete surfaces. TECHNICAL DATA: Type of fibre: basalt fibre. Weight: 250…
Alkali-resistant, primed basalt-fibre mesh for structural “reinforced”…
Two-component epoxy primer with fillers. May be coloured with MAPECOLOR PASTE. TECHNICAL DATA: Mixing ratio: component A : component B = 80 : 20. Colour of mix: neutral. Consistency of the mix:…
Two-component epoxy primer with fillers. May be coloured with MAPECOLOR PASTE.…
