Two-component, shiny epoxy finish in water dispersion for anti-dust and anti-grease treatments on concrete floors, cementitious substrates and as a finishing coat on epoxy systems. TECHNICAL DATA:…
Two-component, shiny epoxy finish in water dispersion for anti-dust and…
Anti-evaporation agent in water emulsion for protecting the surface of concrete against quickly drying out when exposed to sunlight and winds. TECHNICAL DATA: Application: spray Consumption: - neat:…
Anti-evaporation agent in water emulsion for protecting the surface of concrete…
Chloride-free anti-freeze admixture to ensure regular setting times of cementitious mortar and concrete. Also suitable for pre-compressed concrete. TECHNICAL DATA: Dosage: 1-2 kg every 100 kg of…
Chloride-free anti-freeze admixture to ensure regular setting times of…
Silica fume-based admixture with pozzolanic action Where to use Mapeplast SF can be used for the following applications: • High quality thixotropic mortar, resistant even under the most severe…
Silica fume-based admixture with pozzolanic action Where to use Mapeplast SF…
Two-component, protective acrylic filming agent in water dispersion for concrete, ULTRATOP and ULTRATOP LIVING floors. TECHNICAL DATA: Mixing ratio: comp. A: comp. B: = 10 : 0.15. Colour of mix:…
Two-component, protective acrylic filming agent in water dispersion for…
System for colouring MAPEFLOOR I 300 SL, MAPEFLOOR I 500 W, MAPEFLOOR PU 410, PRIMER SN, MAPEFLOOR DECOR 700, MAPEFLOOR I 360 AS and MAPEFLOOR I 390 EDF. N.B.: other RAL colours available upon…
System for colouring MAPEFLOOR I 300 SL, MAPEFLOOR I 500 W, MAPEFLOOR PU 410,…
Two-component, normal-setting, thixotropic epoxy grout for evening out concrete surfaces and for structural bonding. TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 3 : 1. Workability time: 35…
Two-component, normal-setting, thixotropic epoxy grout for evening out concrete…
Expansive, super-fluid cementitious binder for mixing injection slurry, mortar and concrete. TECHNICAL DATA: Mixing ratio: – injection slurry: 100 parts of STABILCEM with 32 parts of water; – mortar,…
Expansive, super-fluid cementitious binder for mixing injection slurry, mortar…
Three-component, epoxy-cementitious mortar for smoothing damp substrates. TECHNICAL DATA: Maximum dimension of aggregate: 0.25 mm. Mixing ratio: comp. A : comp. B : comp. C = 4.8 : 15.2 : 80. Pot…
Three-component, epoxy-cementitious mortar for smoothing damp substrates.…
Two-component, polyurethane finishing product in water dispersion with low yellowing properties, for anti-dust and anti-oil treatments. TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 87 : 13.…
Two-component, polyurethane finishing product in water dispersion with low…
One-component, normal-setting cementitious mortar for smoothing concrete and cementitious render. TECHNICAL DATA: Maximum dimension of aggregate: 0.4 mm. Mixing ratio: 100 parts of MONOFINISH with…
One-component, normal-setting cementitious mortar for smoothing concrete and…
Pultruded glass fibre rebar pre-impregnated with epoxy-modified vinylester resin for structural reinforcement of damaged reinforced concrete, brick, stone and tuff elements. TECHNICAL DATA: Tensile…
Pultruded glass fibre rebar pre-impregnated with epoxy-modified vinylester…
High tensile pultruded carbon fibre rebars impregnated with epoxy resin for structural strengthening of damaged concrete, wooden and masonry elements. TECHNICAL DATA: Modulus of elasticity: 155,000…
High tensile pultruded carbon fibre rebars impregnated with epoxy resin for…
Alkali-resistant glass fibre mesh suitable for reinforced skimming layers when repairing façades, or for the execution of MAPETHERM thermal insulation systems. TECHNICAL DATA: Composition: 100% glass…
Alkali-resistant glass fibre mesh suitable for reinforced skimming layers when…
Coloured acrylic undercoat with a smooth finish and good filling and adhesion promoting properties, for internal and external surfaces. TECHNICAL DATA: Consistency: thick liquid. Colour: white or…
Coloured acrylic undercoat with a smooth finish and good filling and adhesion…
Transpirant, coloured silicate undercoat with a smooth finish and good filling properties for internal and external surfaces, according to DIN 18363 Standards. TECHNICAL DATA: Consistency: thick…
Transpirant, coloured silicate undercoat with a smooth finish and good filling…
Water-repellent, coloured acrylic undercoat with a smooth finish and good filling properties for internal and external surfaces. TECHNICAL DATA: Consistency: thick liquid. Colour: white or various…
Water-repellent, coloured acrylic undercoat with a smooth finish and good…
