High-protection, thick-layered acrylic coating product with high filling properties for internal and external surfaces. Available in the following granulometries: 0.7 mm, 1.2 mm, 1.5 mm and 2.0 mm.…
High-protection, thick-layered acrylic coating product with high filling…
Mono-filament, virgin polypropylene fibres with a length of 12 and 18 mm, for concrete Where to use: Mapefibre NS12 is particularly suitable for the following: production of concrete used for…
Mono-filament, virgin polypropylene fibres with a length of 12 and 18 mm, for…
Highly protective, mould and mildew-resistant acrylic coating product with, for internal and external surfaces. Available in the following granulometries: 1.2 mm and 1.5 mm. TECHNICAL DATA:…
Highly protective, mould and mildew-resistant acrylic coating product with, for…
Highly protective transpirant, water-repellent, mildew and mould-resistant siloxane coating product for internal and external surfaces. Available in the following granulometries: 0.7 mm and 1.2 mm.…
Highly protective transpirant, water-repellent, mildew and mould-resistant…
Hygienising detergent in watery solution. TECHNICAL DATA: Consistency: fluid liquid. Colour: transparent. Density (EN ISO 2811-1) (g/cm³): approx. 1.01. Dilution rate: diluted up to 300% of water.…
Hygienising detergent in watery solution. TECHNICAL DATA: Consistency: fluid…
Transpirant, water-repellent, anti-mildew and mould hygienising siloxane paint for internal and external surfaces. TECHNICAL DATA: Consistency: thick liquid. Colour: white or various colours using…
Transpirant, water-repellent, anti-mildew and mould hygienising siloxane paint…
One-component pre-blended thixotropic mortar with controlled shrinkage for anchoring, by injection, of tie rods and bolts in all types of grounds. Use Stabilcem T for anchoring tie rods of any length…
One-component pre-blended thixotropic mortar with controlled shrinkage for…
Two-component, aromatic, coloured, elastic, polyurethane resin to form the coating systems MAPEFLOOR COMFORT SYSTEM AR and MAPEFLOOR COMFORT SYSTEM AR/X. Available only upon request. TECHNICAL DATA:…
Two-component, aromatic, coloured, elastic, polyurethane resin to form the…
Two-component epoxy primer for priming cementitious bridge deck substrates before waterproofing with an asphalt or synthetic membrane layer. TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 3 : 1.…
Two-component epoxy primer for priming cementitious bridge deck substrates…
High-strength, cementitious sulphate binder for making fluid slurry and/or super-fluid injection mortar. Stabilcem ARS is used for making fluid slurry, mortar and beton applied by injection or…
High-strength, cementitious sulphate binder for making fluid slurry and/or…
Expansive admix for controlled-shrinkage concrete. TECHNICAL DATA: Dosage: add between 5 and 8% on the amount of cement in the mix. Packaging: 20 kg vacuum-packed polyethylene bags.
Expansive admix for controlled-shrinkage concrete. TECHNICAL DATA: Dosage: add…
Transpirant, water-repellent, scratch-effect, trowelable siloxane coating product with good defect covering properties for internal and external surfaces. Available in the following granulometries:…
Transpirant, scratch-effect silicate coating product with defect-covering properties for internal and external surfaces, according to DIN 18363 Standards. Available in the following granulometries:…
Transpirant, scratch-effect silicate coating product with defect-covering…
Highly transpirant, thick-layered silicate coating product with high filling properties for internal and external surfaces in compliance with DIN 18363. Available in the following granulometries: 0.7…
Highly transpirant, thick-layered silicate coating product with high filling…
Cementitious adhesive mortar for expanded block masonry. TECHNICAL DATA: Maximum diameter of aggregate: 1 mm. Mixing ratio: 100 parts of POROCOL with 22-24 parts of water. Pot life of mix:…
Cementitious adhesive mortar for expanded block masonry. TECHNICAL DATA:…
Multi-purpose expanding polyurethane foam for filling, soundproofing and insulating. Available in gun version (MAPEPUR UNIVERSAL FOAM G) for use with a standard MAPEPUR GUN and hand-held spray can…
Multi-purpose expanding polyurethane foam for filling, soundproofing and…
Expanding polyurethane foam adhesive for bonding, filling, soundproofing and insulating. Available in gun version (MAPEPUR ROOF FOAM G) for use with a standard MAPEPUR GUN and hand-held spray can…
Expanding polyurethane foam adhesive for bonding, filling, soundproofing and…
Expanding polyurethane foam adhesive for filling, insulating and soundproofing. Certified fire resistant up to EI 240. Available in hand-held spray cans (MAPEPUR ROOF FOAM M). TECHNICAL DATA: Free…
Expanding polyurethane foam adhesive for filling, insulating and soundproofing.…
