Fibre-reinforced, elastomeric, high flexibility finishing product with good defect covering capacity, for internal and external applications. TECHNICAL DATA: Consistency: thick liquid. Colour: white…
Fibre-reinforced, elastomeric, high flexibility finishing product with good…
Structural polymer fibres for concrete and cementitious screeds. May be used to completely or partially substitute conventional reinforcement. Length of fibres: 24 and 42 mm. TECHNICAL DATA: Dosage:…
Structural polymer fibres for concrete and cementitious screeds. May be used to…
Three-component, self-levelling, epoxy-cementitious coating for layers from 1.5 to 3 mm thick. TECHNICAL DATA: Mixing ratio: comp. A : comp. B : comp. C = 1 : 3 : 20. Colour of mix: light grey.…
Three-component, self-levelling, epoxy-cementitious coating for layers from 1.5…
Pre-blended mortar for grouting architectonic stone floors with exceptional physical-chemical characteristics suitable for areas exposed to dry/damp cycles specified by exposure class XF4, with high…
Pre-blended mortar for grouting architectonic stone floors with exceptional…
Adhesive zinc plates applied directly on the surface of structures for galvanic cathodic protection against the corrosion of steel reinforcement rods. TECHNICAL DATA: Thickness of plate: 0.25 mm.
Adhesive zinc plates applied directly on the surface of structures for galvanic…
Free-flowing, compensated-shrinkage cementitious mortar reinforced with inorganic fibres for repairing concrete structures where higher ductility is required. TECHNICAL DATA: Maximum size of…
One-component pre-packed multi-purpose non-accelerated cementitious mortar applied using either the dry or damp spraying technique. Mapegrout Gunite is used for all repair of damaged concrete, such…
Fibre-reinforced, compensated-shrinkage mortar for repairing concrete. TECHNICAL DATA: Maximum dimension of aggregate: 2.5 mm. Mixing ratio: 100 parts of MAPEGROUT TISSOTROPICO with 15.5-16.5 parts…
Fibre-reinforced, compensated-shrinkage mortar for repairing concrete.…
Two-component, castable polyurethane sealant for sealing joints in roads up to surface level, mixed with QUARTZ 0.5 sand at a ratio of up to 1:1 by weight. Setting and hardening may be accelerated by…
Two-component, castable polyurethane sealant for sealing joints in roads up to…
Synthetic resin-based primer in solvent solution to improve the adhesion of liquid elastic membranes (from the Aquaflex Roof line) onto existing bituminous membranes
Synthetic resin-based primer in solvent solution to improve the adhesion of…
Ultra quick-setting and hardening hydraulic binder for blocking seeping water. TECHNICAL DATA: Consistency: fine powder. Workability time at +20°C: approximately 1 minute. Storage: 12 months. Mixing…
Ultra quick-setting and hardening hydraulic binder for blocking seeping water.…
High-performance, silicone water-repellent in watery solution for external walls. TECHNICAL DATA: Consistency: fluid liquid. Colour: transparent. Density (EN ISO 2811-1) (g/cm³): approx. 1.02. Dry…
High-performance, silicone water-repellent in watery solution for external…