Superfluidificante a base acrilica modificata per calcestruzzi con bassi rapporti acqua/cemento e lunghissimo mantenimento della lavorabilità anche in climi caldi
Superfluidificante a base acrilica modificata per calcestruzzi con bassi…
Hardening accelerating admixture for chloride-free concrete Where to use Dynamon HAA is particularly suitable for reaching very high mechanical strengths at early age, even at low temperatures. Used…
Hardening accelerating admixture for chloride-free concrete Where to use…
Fine aggregate supplementing super-plasticizer for concrete with low loss of workability and high reduction of mixing water Where to use Dynamon SX 14 is particularly suitable for all applications…
Fine aggregate supplementing super-plasticizer for concrete with low loss of…
Modified acrylic super-plasticiser for concrete, characterised by its low water/cement ratio, very high mechanical strength and long workability times. TECHNICAL DATA: Dosage: 0.5-2 lit every 100 kg…
Modified acrylic super-plasticiser for concrete, characterised by its low…
Super-plasticizers based on a modified acrylic polymer for ready-mix concrete with low water/cement ratio, extremely high mechanical strength and long slump retention Where to use Dynamon SR3 is…
Super-plasticizers based on a modified acrylic polymer for ready-mix concrete…
Superplasticiser based on modified acrylic polymer for ready mix concrete with low water/cement ratio and very long slump retention in hot climates. Dynamon SR2 is a modified acrylic-based high…
Superplasticiser based on modified acrylic polymer for ready mix concrete with…
Super-plasticizers based on a modified acrylic polymer for ready-mix concrete with low water/cement ratio, high mechanical strength and long slump retention Where to use Dynamon SR1 is particularly…
Super-plasticizers based on a modified acrylic polymer for ready-mix concrete…
Super-plasticizers based on a modified acrylic polymer for precast concrete with low water/cement ratio and very high mechanical strengths at early and final age Where to use Dynamon SP1 is…
Super-plasticizers based on a modified acrylic polymer for precast concrete…
Ultra high performance self-compacting expanding cementitious mortar. TECHNICAL DATA: Maximum size of aggregate: 6 mm. Mixing ratio: 100 parts of PLANITOP HPC LV with 9-9.4 parts of water. Pot life…
Ultra high performance self-compacting expanding cementitious mortar. TECHNICAL…
Two-component ultra high performance shrinkage-compensated free-flowing high ductility fibre-reinforced cementitious mortar with stiff steel fibres for restoring and repairing concrete. N.B.:…
Two-component ultra high performance shrinkage-compensated free-flowing high…
Two-component multipurpose epoxy formulate for industrial floors in compliance with standards applied to the drinks and foodstuffs industry and clean rooms
Two-component multipurpose epoxy formulate for industrial floors in compliance…
High-performance mortar for anchoring and sealing. Mapefill F is used for anchoring and sealing machinery, tie-rods, prefabricated metallic structures, turbines, machine tools, etc. in concrete. It…
High-performance mortar for anchoring and sealing. Mapefill F is used for…
Two-component, super-fluid epoxy resin for injections and anchorings. TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 4 : 1. Pot life of mix: 40 minutes (at +23°C). Classification: EN 1504-5 and EN…
Two-component, super-fluid epoxy resin for injections and anchorings. TECHNICAL…
Fluid expansive mortar for anchoring objects in place. TECHNICAL DATA: Maximum dimension of aggregate: 2.5 mm. Mixing ratio: 100 parts of MAPEFILL with 14-15 parts of water. Pot life of mix:…
Fluid expansive mortar for anchoring objects in place. TECHNICAL DATA: Maximum…
Two-component epoxy paint for anti-acid and non-toxic coatings on concrete surfaces, suitable for contact with drinking water. TECHNICAL DATA: Consistency: component A thick paste, component B fluid…
Two-component epoxy paint for anti-acid and non-toxic coatings on concrete…
Two-component epoxy resin with a very low viscosity for injecting into micro-cracks, also on wet surfaces. TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 4 : 1. Pot life of mix: 35 minutes (at…
Two-component epoxy resin with a very low viscosity for injecting into…
Two-component thixotropic epoxy adhesive with long workability time for structural bonds. TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 3 : 1. Pot life of mix: 50 minutes (at +23°C). Minimum…
Two-component thixotropic epoxy adhesive with long workability time for…
