Project Vittorio Emanuele II Arcade, Milano

Vittorio Emanuele II Arcade

Milano, Italy

Ref #: 4893

Category: PUBLIC BUILDINGS AND PLACES

Construction


Yard	Monumental/commercial arcade
Location	Milano, Italy
Subcategory	PEDESTRIAN AREA
Built in	2011
Opened in	2012
Application	historical mosaics restoration
Application Type	Installation of floors
Client	Comune di Milano, Settore Cultura e Beni Comunali Diversi
Contractor company	Impresa Trivella
Installer companies	Trivella SpA, Cinisello Balsamo (MI)
Specialists involved	arch. Pasquale Francesco Mariani Orlandi; RUP: arch. Silvia Volpi; Sovrintendenza: Libero Corrieri, Alberto Artioli; Direzione operativa: Simone Ascione, Vittorio Alfieri (Comune di Milano)
MAPEI Distributor	Centro Edile Antonini (Milano), Gruppo BEA (Milano)
Credits	Gianni Dal Magro
Project Manager	Paolo Maggi

Product used for the project

ELASTORAPID

Two-component, high-performance, highly-deformable, quick-setting and drying cementitious adhesive with no vertical slip and extended open time for ceramic tiles and stone material (thickness of…

Two-component, high-performance, highly-deformable, quick-setting and drying…

EPORIP

Two-component, solvent-free epoxy adhesive for monolithic sealing cracked screeds. TECHNICAL DATA: Consistency: comp. A: fluid paste; comp. B: fluid paste. Colours: comp. A: black; comp. B: white.…

Two-component, solvent-free epoxy adhesive for monolithic sealing cracked…

wo-component, high-performance polyurethane adhesive with no vertical slip for ceramic tiles and stone material. Conformity of Keralastic T is declared in ITT certificates n° 25040471/Gi (TUM) issued…

wo-component, high-performance polyurethane adhesive with no vertical slip for…

KERAPOXY

Two-component, high-performance, anti-acid epoxy mortar and adhesive with no vertical slip for laying and grouting ceramic tiles and stone material.

Two-component, high-performance, anti-acid epoxy mortar and adhesive with no…

MAPECEM PRONTO

Pre-blended, ready-to-use, quick-setting and drying (24 hours), controlled-shrinkage mortar for screeds. TECHNICAL DATA: Mixing ratio: 1 25 kg bags of MAPECEM PRONTO with approximately 2.2 litres of…

Pre-blended, ready-to-use, quick-setting and drying (24 hours),…

MAPEGROUT SV FIBER

Hi-flow, steel fibre-reinforced compensated-shrinkage, quick-setting and hardening, high-ductility cementitious mortar applied at temperatures down to -5°C, with stiff steel fibres for repairing…

Hi-flow, steel fibre-reinforced compensated-shrinkage, quick-setting and…

MAPESIL AC

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for movements up to 25%.

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for…

MAPESIL LM

Neutral silicone mould-resistant sealant with BioBlock ® technology for stone for movements up to 25%. TECHNICAL DATA: Movement in service: 25%. Modulus of elasticity at 100% elongation: 0.35 N/mm².…

Neutral silicone mould-resistant sealant with BioBlock ® technology for stone…

MAPESTONE TFB 60

Pre-blended mortar with high compressive strength and good resistance to de-icing salts, freeze-thaw cycles and seawater with exceptional physical-chemical characteristics suitable for areas exposed…

Pre-blended mortar with high compressive strength and good resistance to…

NIVORAPID

Quick-drying, thixotropic, cementitious smoothing compound for thicknesses from 1 to 20 mm, including on vertical surfaces. TECHNICAL DATA: Where to use: internal floors and walls for ceramic,…

Quick-drying, thixotropic, cementitious smoothing compound for thicknesses from…

PRIMER 3296

Acrylic primer in water dispersion with high penetration, consolidating and anti-dust properties for screeds. TECHNICAL DATA: Consistency: liquid. Colour: opaline. Dilution ratio: as is, 1: 1 or 1:2…

Acrylic primer in water dispersion with high penetration, consolidating and…

PRIMER G

Synthetic resin primer in water dispersion with a very low content of volatile organic compounds (VOC). TECHNICAL DATA: Consistency: liquid. Colour: blue. Dilution rate: from 1:1 to 1: 3 with water…

Synthetic resin primer in water dispersion with a very low content of volatile…