Project Uniklinika Kardinála Korca, Prievidza

Uniklinika Kardinála Korca

Prievidza, Slovakia

Ref #: 5202

Category: PUBLIC BUILDINGS AND PLACES

Construction


Yard	Hydroizolácie, Inštalácia obkladov a dlažieb
Location	Prievidza, Slovakia
Subcategory	HOSPITAL
Built in	2009
Application	Hydroizolácie, Inštalácia obkladov a dlažieb
Application Type	Floor/wall coverings
Client	UNIPHARMA - 1. slovenská lekárnická akciová spoločnosť
Contractor company	T-Design, s.r.o.
Installer companies	T-Design, s.r.o.
MAPEI Distributor	MAPEI SK, s.r.o.

Product used for the project

ADESILEX P9

High-performance cementitious adhesive with no vertical slip and extended open time for ceramic tiles and stone materials. The white version has very high white balance and excellent workability.

High-performance cementitious adhesive with no vertical slip and extended open…

KERACOLOR FF

Pre-blended, high-performance, polymer-modified cementitious mortar with water-repellent DropEffect ® technology for grouting joints up to 6 mm wide. TECHNICAL DATA: Pot life of mix: approx. 2…

Pre-blended, high-performance, polymer-modified cementitious mortar with…

KERAFLEX

High-performance cementitious adhesive with no vertical slip and extended open time for ceramic and stone tiles.

High-performance cementitious adhesive with no vertical slip and extended open…

KERAPOXY

Two-component, high-performance, anti-acid epoxy mortar and adhesive with no vertical slip for laying and grouting ceramic tiles and stone material.

Two-component, high-performance, anti-acid epoxy mortar and adhesive with no…

MAPEFLEX PU40

Paintable polyurethane sealant with a low modulus of elasticity for movements up to 25%. TECHNICAL DATA: Movement in service: 25%. Modulus of elasticity at 100% elongation: 0.24 N/mm². Shore A…

Paintable polyurethane sealant with a low modulus of elasticity for movements…

MAPESIL AC

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for movements up to 25%.

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for…

Macro-holed, non-woven polypropylene fabric for reinforcing waterproofing membranes. TECHNICAL DATA: Weight: 80 g/m². Thickness: 0.6 mm. Tensile strength: 5 kN/m. Deformation at maximum strain: – 80%…

Macro-holed, non-woven polypropylene fabric for reinforcing waterproofing…

PRIMER G

Synthetic resin primer in water dispersion with a very low content of volatile organic compounds (VOC). TECHNICAL DATA: Consistency: liquid. Colour: blue. Dilution rate: from 1:1 to 1: 3 with water…

Synthetic resin primer in water dispersion with a very low content of volatile…