Project Sandro Pertini Theatre Bresso, Bresso


Yard	theatre, waterproof
Location	Bresso, Italy
Subcategory	THEATRE
Application	The use of our waterproofing materials, adhesives and protective coatings in the first building reconstruction in Italy with EU funds provided by the “Recovery and Resilience Facility” (RRF)
Start and finish date	2024
Application Type	Waterproofing systems
Contractor company	Multimanutenzione S.r.l.
Architects	Fortunato Businaro
MAPEI Coordination	Andrea Serafin, Davide Dido, Marco Cattuzzo, Fabio Bergamaschi

MAPECOAT TNS EXTREME

Two-component rapid-drying epoxy-acrylic coloured top-coating also for car traffic areas

Two-component rapid-drying epoxy-acrylic coloured top-coating also for car…

MAPECOAT TNS PRIMER EPW

Two-component epoxy primer in water dispersion

MAPEFER 1K ZERO

One-component, anti-corrosion cementitious mortar for steel reinforcement rods

MAPEFLEX PU 45 FT

Rapid-hardening paintable polyurethane sealant and adhesive with a high modulus of elasticity for movements up to 20%. TECHNICAL DATA: Movement in service: 20%. Modulus of elasticity at 100%…

Rapid-hardening paintable polyurethane sealant and adhesive with a high modulus…

MAPENET 150

Alkali-resistant glass fibre mesh (in compliance with the ETAG 004 guide) for reinforcing protective waterproofing layers, anti-fracture membranes and thermal insulation systems. TECHNICAL DATA:…

Alkali-resistant glass fibre mesh (in compliance with the ETAG 004 guide) for…

PLANITOP SMOOTH & REPAIR ZERO

Quick-setting, fibre-reinforced, shrinkage-compensated, thixotropic cementitious mortar for repairing and smoothing concrete, applied in various thicknesses of from 3 to 40 mm in a single layer

Quick-setting, fibre-reinforced, shrinkage-compensated, thixotropic…

PRIMER 3296

Acrylic primer in water dispersion with high penetration, consolidating and anti-dust properties for screeds. TECHNICAL DATA: Consistency: liquid. Colour: opaline. Dilution ratio: as is, 1: 1 or 1:2…

Acrylic primer in water dispersion with high penetration, consolidating and…

PRIMER SN

Two-component epoxy primer with fillers. May be coloured with MAPECOLOR PASTE. TECHNICAL DATA: Mixing ratio: component A : component B = 80 : 20. Colour of mix: neutral. Consistency of the mix:…

Two-component epoxy primer with fillers. May be coloured with MAPECOLOR PASTE.…

SILANCOLOR CLEANER PLUS

Hygienising detergent in watery solution. TECHNICAL DATA: Consistency: fluid liquid. Colour: transparent. Density (EN ISO 2811-1) (g/cm³): approx. 1.01. Dilution rate: diluted up to 300% of water.…

Hygienising detergent in watery solution. TECHNICAL DATA: Consistency: fluid…

TOPCEM PRONTO

Ready-to-use, normal-setting, controlled-shrinkage mortar with high thermal efficiency for quick-drying (4 days) screeds.

Ready-to-use, normal-setting, controlled-shrinkage mortar with high thermal…

Three-component epoxy-cementitious primer for non-absorbent waterproofing damp substrates. TECHNICAL DATA: Consistency: comp. A liquid; comp. B liquid; comp. C powder. Colours: comp. A white; comp. B…

Three-component epoxy-cementitious primer for non-absorbent waterproofing damp…

ULTRABOND ECO V4SP

Multi-purpose, acrylic adhesive in water dispersion with a long open time and very low emission level of volatile organic compounds (VOC), for laying rubber, PVC, vinyl, polyolephinic, linoleum and…

Multi-purpose, acrylic adhesive in water dispersion with a long open time and…