Project Ferenc Puskás Stadium, Budapest


Yard	New building
Location	Budapest, Hungary
Subcategory	STADIUM
Application	Supply of products for industrial floor, waterproofing, concrete repair, ceramic installation
Start and finish date	2017/2019
Application Type	New building
Client	National Centres for Sports (NSK)
Contractor company	Magyar Építő Zrt., ZÁÉV Zrt., Épkar Zrt., WHB Ltd.
Installer companies	Spectech Ltd., Akvaszig Ltd., Tipox Betontechnika Ltd., Stukkó Ltd., Ratskó Bau Ltd., Dominó Ltd.
Architects	György Skardeli
MAPEI Distributor	BNF Áruház, Csorna
Credits	OD Pictures
MAPEI Coordination	Gergely Garay, István Jankovits, Ervin Horváth, Zsolt Marton, Zsolt Dunai

ADESILEX P9

High-performance cementitious adhesive with no vertical slip and extended open time for ceramic tiles and stone materials. The white version has very high white balance and excellent workability.

High-performance cementitious adhesive with no vertical slip and extended open…

KERACOLOR FF

Pre-blended, high-performance, polymer-modified cementitious mortar with water-repellent DropEffect ® technology for grouting joints up to 6 mm wide. TECHNICAL DATA: Pot life of mix: approx. 2…

Pre-blended, high-performance, polymer-modified cementitious mortar with…

MAPEBAND

Alkali-resistant rubber tape with felt for cementitious waterproofing systems and liquid sheaths. TECHNICAL DATA: In service temperature range: from -30°C to +60°C. Packaging: – 120 mmx50 m rolls; –…

Alkali-resistant rubber tape with felt for cementitious waterproofing systems…

MAPELASTIC AQUADEFENSE

Ready-to-use, ultra quick-drying, flexible liquid membrane for waterproofing internal and external surfaces. TECHNICAL DATA: Consistency: paste. Application temperature range: from +5°C to +35°C at…

Ready-to-use, ultra quick-drying, flexible liquid membrane for waterproofing…

Two-component, flexible cementitious mortar for waterproofing concrete surfaces subject to negative and positive hydraulic lift. TECHNICAL DATA: Consistency: thixotropic. Mixing ratio: comp. A: comp.…

Two-component, flexible cementitious mortar for waterproofing concrete surfaces…

MAPENET 150

Alkali-resistant glass fibre mesh (in compliance with the ETAG 004 guide) for reinforcing protective waterproofing layers, anti-fracture membranes and thermal insulation systems. TECHNICAL DATA:…

Alkali-resistant glass fibre mesh (in compliance with the ETAG 004 guide) for…

MAPESIL AC

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for movements up to 25%.

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for…

PRIMER 3296

Acrylic primer in water dispersion with high penetration, consolidating and anti-dust properties for screeds. TECHNICAL DATA: Consistency: liquid. Colour: opaline. Dilution ratio: as is, 1: 1 or 1:2…

Acrylic primer in water dispersion with high penetration, consolidating and…

PRIMER G

Synthetic resin primer in water dispersion with a very low content of volatile organic compounds (VOC). TECHNICAL DATA: Consistency: liquid. Colour: blue. Dilution rate: from 1:1 to 1: 3 with water…

Synthetic resin primer in water dispersion with a very low content of volatile…

PRIMER SN

Two-component epoxy primer with fillers. May be coloured with MAPECOLOR PASTE. TECHNICAL DATA: Mixing ratio: component A : component B = 80 : 20. Colour of mix: neutral. Consistency of the mix:…

Two-component epoxy primer with fillers. May be coloured with MAPECOLOR PASTE.…

PURTOP 400 M HK

Two-component, solvent-free, spray applied, hybrid polyurea membrane applied in situ using a high-pressure, bi-mixer type pump to form waterproof coatings on bridge decks, cut and cover tunnels and…

Two-component, solvent-free, spray applied, hybrid polyurea membrane applied…