Project Petronas Twin Towers, Kuala Lumpur

Petronas Twin Towers

Kuala Lumpur, Malaysia

Ref #: 60000001

Category: COMMERCIAL FACILITIES

Construction


Yard	KLCC Suria
Location	Kuala Lumpur, Malaysia
Subcategory	SHOPPING CENTER
Built in	1995
Opened in	1997
Application	supply of products for waterproofing and installation of mosaics, ceramics and natural stones
Start and finish date	1997/1998
Application Type	Floor/wall coverings
Client	Kuala Lumpur City Center (Holdings) Sendirian Berhad
Architects	Cesar Pelli
Specialists involved	Petronas - Malesia
Project Manager	Cesar Pelli e Associates - New Haven USA
MAPEI Coordination	Felix Quek - Mapei Far East

Product used for the project

ISOLASTIC

Flexible latex additive to be mixed with Kerabond, Kerabond T, Kerafloor and Adesilex P10. Applications: Isolastic is a latex additive to be mixed with Kerabond, Kerabond T or Kerafloor to improve…

Flexible latex additive to be mixed with Kerabond, Kerabond T, Kerafloor and…

ISOLASTIC 50

Latex additive to elasticize cement-based adhesives Isolastic 50 is a latex to be mixed with Kerabond T, Kerafloor and Adesilex P10 to improve their performances and deformability to meet the…

Latex additive to elasticize cement-based adhesives Isolastic 50 is a latex to…

KERABOND

Cementitious adhesive for ceramic tiles (thickness of adhesive up to 5 mm). Conformity of Kerabond is declared in ITT certificate n° 25070080/Gi (TUM) and 25080025/Gi (TUM) issued by the Technische…

Cementitious adhesive for ceramic tiles (thickness of adhesive up to 5 mm).…

KERACOLOR FF

Pre-blended, high-performance, polymer-modified cementitious mortar with water-repellent DropEffect ® technology for grouting joints up to 6 mm wide. TECHNICAL DATA: Pot life of mix: approx. 2…

Pre-blended, high-performance, polymer-modified cementitious mortar with…

KERAFLOOR

Cementitious adhesive for ceramic tiles (thickness of adhesive up to 15 mm). Conformity of Kerafloor is declared in ITT certificates n° 25050161/Gi and n° 25080270/Gi (TUM) issued by the Technische…

Cementitious adhesive for ceramic tiles (thickness of adhesive up to 15 mm).…

Special quick-setting and drying (24 hours), controlled-shrinkage hydraulic binder for screeds. TECHNICAL DATA: Recommended mixing ratio: 350-450 kg of MAPECEM for 1 m³ of aggregates (diameter from 0…

Special quick-setting and drying (24 hours), controlled-shrinkage hydraulic…

MAPELASTIC

Two-component, flexible cementitious mortar for waterproofing balconies, terraces, bathrooms and swimming pools.

Two-component, flexible cementitious mortar for waterproofing balconies,…

PLANICRETE 50

Synthetic-rubber latex for cement mixes Technical Charateristics Planicrete 50 is a water dispersion of a special synthetic elastomer, totally resistant to alkaline saponification. When mixed with…

Synthetic-rubber latex for cement mixes Technical Charateristics Planicrete 50…

PLANICRETE LATEX

Synthetic rubber latex to improve adhesion of cement mixes. TECHNICAL DATA: Consistency: fluid liquid. Dry solids content: 47%. Storage: 12 months. Consumption: – for adhesive slurry: 100-150 g/m²; –…

Synthetic rubber latex to improve adhesion of cement mixes. TECHNICAL DATA:…