Project Milan Expo 2015, Milano


Yard	stands, clusters and infrastructures
Location	Milano, Italy
Subcategory	EXHIBITION CENTER
Built in	2010
Opened in	2015
Application	Supplying of admixtures for concrete, installation of floors and anchoring
Application Type	New building
Link to details page	http://www.mapeifood.com/

ADESILEX G19

Two-component, epoxy-polyurethane adhesive for resilient and textile flooring on internal and external absorbent and non-absorbent substrates. Specifically developed for the installation of rubber…

Two-component, epoxy-polyurethane adhesive for resilient and textile flooring…

ANTIPLUVIOL W

Transparent, silane and siloxane water-repellent impregnator in watery solution. TECHNICAL DATA: Consistency: fluid liquid. Colour: milky. Density (EN ISO 2811-1) (g/cm³): approx. 1.01. Active…

Transparent, silane and siloxane water-repellent impregnator in watery…

Elastocolor Paint

Elastomeric, crack-bridging, permanently flexible, protective paint with high resistance to chemicals for internal and external surfaces. TECHNICAL DATA: Consistency: thick liquid. Colour: white or…

Elastomeric, crack-bridging, permanently flexible, protective paint with high…

ELASTORAPID

Two-component, high-performance, highly-deformable, quick-setting and drying cementitious adhesive with no vertical slip and extended open time for ceramic tiles and stone material (thickness of…

Two-component, high-performance, highly-deformable, quick-setting and drying…

Pre-blended, high-performance polymer-modified cementitious mortar for grouting joints 4 to 15 mm wide. TECHNICAL DATA: Pot life of mix: approx. 2 hours. Waiting time before finishing: 10-20 minutes.…

Pre-blended, high-performance polymer-modified cementitious mortar for grouting…

KERAFLEX MAXI S1

High-performance deformable cementitious adhesive with no vertical slip, extended open time and Low Dust technology for ceramic tiles, particularly recommended for laying large porcelain and natural…

High-performance deformable cementitious adhesive with no vertical slip,…

MALECH

Water-based acrylic undercoat and bonding promoter with a smooth finish. TECHNICAL DATA: Consistency: fluid liquid. Colour: transparent. Density (EN ISO 2811-1) (g/cm³): approx. 1.01. Dry solids…

Water-based acrylic undercoat and bonding promoter with a smooth finish.…

MAPEGROUT EASY FLOW GF

One component, shrinkage-compensated, sulphate-resistant, thixotropic, inorganic fibre-reinforced mortar, for repairing concrete structures where higher ductility is required. Mapegrout Easy Flow GF…

One component, shrinkage-compensated, sulphate-resistant, thixotropic,…

MAPELASTIC TURBO

Two-component rapid-drying elastic cementitious mortar for waterproofing terraces and balconies, including at low temperatures and on substrates not completely dry.

Two-component rapid-drying elastic cementitious mortar for waterproofing…

MAPETEX SEL

Macro-holed, non-woven polypropylene fabric for reinforcing waterproofing membranes. TECHNICAL DATA: Weight: 80 g/m². Thickness: 0.6 mm. Tensile strength: 5 kN/m. Deformation at maximum strain: – 80%…

Macro-holed, non-woven polypropylene fabric for reinforcing waterproofing…

ULTRALITE S1

One-component, high-performance, deformable, lightweight cementitious adhesive with no vertical slip, long open time, Low Dust technology and extremely high yield easy to apply by trowel, for ceramic…

One-component, high-performance, deformable, lightweight cementitious adhesive…

ULTRATOP

Self-levelling, ultra-quick hardening mortar with special hydraulic binders, applied at a thickness between 5 and 40 mm to create abrasion-resistant floors.

Self-levelling, ultra-quick hardening mortar with special hydraulic binders,…