Project Hotel Palace Portorož, Portoroz


Yard	Floor/wall covering
Location	Portoroz, Slovenia
Subcategory	HOTEL/INN
Built in	2006
Opened in	2008
Application	Laying ceramic tiles and mosaic, stone material, wood strips in swimming pools, balconies, bathrooms, kitchen, wellness center and terrace.
Application Type	Floor/wall coverings
Contractor company	Kraški zidar, d.d., Sežana
Installer companies	Scarbo, d.o.o., Bertoki
MAPEI Distributor	Scarbo, d.o.o., Koper (Capodistria)
Project Manager	Franc Zorč, u.d.i.g.

ADESILEX P10

High-performance, white cementitious adhesive with no vertical slip and extended open time for glass mosaic, ceramic and marble coatings (thickness of adhesive up to 5 mm). Conformity of Adesilex P10…

High-performance, white cementitious adhesive with no vertical slip and…

ADESILEX P9

High-performance cementitious adhesive with no vertical slip and extended open time for ceramic tiles and stone materials. The white version has very high white balance and excellent workability.

High-performance cementitious adhesive with no vertical slip and extended open…

ADESILEX PG1

Two-component, rapid-setting thixotropic adhesive for structural bonds. TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 3 : 1. Pot life of mix: 35 minutes (at +23°C). Minimum applicable thickness:…

Two-component, rapid-setting thixotropic adhesive for structural bonds.…

KERACOLOR FF

Pre-blended, high-performance, polymer-modified cementitious mortar with water-repellent DropEffect ® technology for grouting joints up to 6 mm wide. TECHNICAL DATA: Pot life of mix: approx. 2…

Pre-blended, high-performance, polymer-modified cementitious mortar with…

KERAFLEX

High-performance cementitious adhesive with no vertical slip and extended open time for ceramic and stone tiles.

High-performance cementitious adhesive with no vertical slip and extended open…

MAPE-ANTIQUE FC

Salt-resistant, fine-grained lime- and Eco-Pozzolan-based transpirant smoothing mortars applied on lime-based renders. Respectively available in white and light pink. Mape-Antique FC is a…

Salt-resistant, fine-grained lime- and Eco-Pozzolan-based transpirant smoothing…

MAPE-ANTIQUE LC

Salt-resistant, lime and ECO-POZZOLAN hydraulic binder mixed with aggregates in various grain sizes to make de-humidifying render and masonry mortar. TECHNICAL DATA: Mixing ratio: – 0.5-2.5 mm sand:…

Salt-resistant, lime and ECO-POZZOLAN hydraulic binder mixed with aggregates in…

MAPE-ANTIQUE RINZAFFO

Salt-resistant, transpirant lime and ECO-POZZOLAN scratch-coat mortar applied as a base layer for de-humidifying, transpirant and “structural” render. TECHNICAL DATA: Maximum diameter of aggregate:…

Salt-resistant, transpirant lime and ECO-POZZOLAN scratch-coat mortar applied…

MAPESIL AC

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for movements up to 25%.

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for…

PLANICRETE LATEX

Synthetic rubber latex to improve adhesion of cement mixes. TECHNICAL DATA: Consistency: fluid liquid. Dry solids content: 47%. Storage: 12 months. Consumption: – for adhesive slurry: 100-150 g/m²; –…

Synthetic rubber latex to improve adhesion of cement mixes. TECHNICAL DATA:…

PLANITOP 400

Quick-setting, controlled-shrinkage thixotropic mortar for repairing the surface of concrete, may be applied in various thicknesses from 1 to 40 mm in a single layer. TECHNICAL DATA: Maximum…

Quick-setting, controlled-shrinkage thixotropic mortar for repairing the…

PLANITOP 540

Water-repellent cementitious skimming mortar with a fine-textured, natural finish for render and concrete. TECHNICAL DATA: Maximum dimension of aggregate: 0.4 mm. Mixing ratio: 100 parts of PLANITOP…

Water-repellent cementitious skimming mortar with a fine-textured, natural…

PRIMER 3296

Acrylic primer in water dispersion with high penetration, consolidating and anti-dust properties for screeds. TECHNICAL DATA: Consistency: liquid. Colour: opaline. Dilution ratio: as is, 1: 1 or 1:2…

Acrylic primer in water dispersion with high penetration, consolidating and…

PRIMER PU60

Moisture curing polyurethane resin for consolidating and waterproofing damp screeds. TECHNICAL DATA: Consistency: liquid. Colour: brown. Dilution ratio: from 25 to 100% with THINNER PU. Set to light…

Moisture curing polyurethane resin for consolidating and waterproofing damp…

Silexcolor Paint

Highly-transpirant silicate paint with a high chemical bond for internal and external surfaces, according to DIN 18363 Standards. TECHNICAL DATA: Consistency: thick liquid. Colour: white or various…

Highly-transpirant silicate paint with a high chemical bond for internal and…

SILEXCOLOR PRIMER

Highly transpirant silicate undercoat with a smooth finish, according to DIN 18363 Standards. TECHNICAL DATA: Consistency: fluid liquid. Colour: transparent. Density (EN ISO 2811-1) (g/cm³): approx.…

Highly transpirant silicate undercoat with a smooth finish, according to DIN…

TOPCEM PRONTO

Ready-to-use, normal-setting, controlled-shrinkage mortar with high thermal efficiency for quick-drying (4 days) screeds.

Ready-to-use, normal-setting, controlled-shrinkage mortar with high thermal…

ULTRABOND P902 2K

Two-component, epoxy-polyurethane adhesive for bonding all types and sizes of parquet on screeds made from MAPECEM, MAPECEM PRONTO, TOPCEM or TOPCEM PRONTO, cementitious screeds, old wooden, ceramic,…

Two-component, epoxy-polyurethane adhesive for bonding all types and sizes of…

Hotel Palace Portorož

Construction

Browse the project Gallery

Product used for the project

Keep in touch