Project Hôpital de la Tour, Meyrin, Meyrin


Yard	Floor coverings
Location	Meyrin, Switzerland
Subcategory	HOSPITAL
Built in	2016
Opened in	2019
Application	Delivery of products for floor coverings over an area of 12 000 square metres
Application Type	Installation of floors
Installer companies	Anhy SA, Plan-les-Ouates; Realsport Goup, Rossens
Architects	de Planta et Associés, Carouge; Aris Serbetis Architecte, Genève; Tridimensions architectes SA, Genève
Specialists involved	Hôpital de La Tour – construction management: Gestron Services (Suisse) SA, Genève
Credits	Sébastien Crettaz, Crans-Montana
MAPEI Coordination	Marcello Maieron

ADESILEX LP

Polychloroprenic double-buttering adhesive in solvent for laying profiles, covings and resilient floors and coverings where immediate setting is required. TECHNICAL DATA: Consistency: thick liquid.…

Polychloroprenic double-buttering adhesive in solvent for laying profiles,…

Two-component, quick-hardening polyester resin for monolithic sealing cracked screeds. TECHNICAL DATA: Consistency: comp. A: fluid paste; comp. B: fluid paste. Colours: comp. A: grey; comp. B: white.…

Two-component, quick-hardening polyester resin for monolithic sealing cracked…

FIBERPLAN

Self-levelling, fibre-reinforced, quick-hardening smoothing compounds for thicknesses from 3 to 10 mm. Particularly recommended for wood. TECHNICAL DATA: Where to use: internal ceramic, natural…

Self-levelling, fibre-reinforced, quick-hardening smoothing compounds for…

MAPECEM PRONTO

Pre-blended, ready-to-use, quick-setting and drying (24 hours), controlled-shrinkage mortar for screeds. TECHNICAL DATA: Mixing ratio: 1 25 kg bags of MAPECEM PRONTO with approximately 2.2 litres of…

Pre-blended, ready-to-use, quick-setting and drying (24 hours),…

MAPECONTACT

Reinforced adhesive strip for laying profiles, base-boards, covings and resilient and textile coatings on steps. TECHNICAL DATA: Colour: – adhesive: transparent; – reinforcement: orange. Weight per…

Reinforced adhesive strip for laying profiles, base-boards, covings and…

MAPENET 150

Alkali-resistant glass fibre mesh (in compliance with the ETAG 004 guide) for reinforcing protective waterproofing layers, anti-fracture membranes and thermal insulation systems. TECHNICAL DATA:…

Alkali-resistant glass fibre mesh (in compliance with the ETAG 004 guide) for…

PRIMER G

Synthetic resin primer in water dispersion with a very low content of volatile organic compounds (VOC). TECHNICAL DATA: Consistency: liquid. Colour: blue. Dilution rate: from 1:1 to 1: 3 with water…

Synthetic resin primer in water dispersion with a very low content of volatile…

PRIMER MF

Two-component, solvent-free epoxy primer used as bonding promoter for products from the MAPEFLOOR range, for consolidating and waterproofing against residual damp on cementitious substrates and as…

Two-component, solvent-free epoxy primer used as bonding promoter for products…

ULTRABOND ECO 4 LVT

Fibre-reinforced LVT adhesive. Specifically developed for the installation of LVT floorings, it guarantees the highest performances in terms of adhesion and dimensional stability. TECHNICAL DATA:…

Fibre-reinforced LVT adhesive. Specifically developed for the installation of…

ULTRABOND ECO V4SP

Multi-purpose, acrylic adhesive in water dispersion with a long open time and very low emission level of volatile organic compounds (VOC), for laying rubber, PVC, vinyl, polyolephinic, linoleum and…

Multi-purpose, acrylic adhesive in water dispersion with a long open time and…

ULTRABOND ECO V4SP FIBER

Multi-purpose, acrylic adhesive in water dispersion with extended open time and very low emission level of volatile organic compounds (VOC) improved by adding fibres, particularly suitable for laying…

Multi-purpose, acrylic adhesive in water dispersion with extended open time and…

ULTRABOND MS RAPID

Rapid-setting assembly adhesive for internal and external use with a high sucker effect. TECHNICAL DATA: Viscosity: thixotropic paste. Open time: 5’. Initial tensile strength: 25 N. Final shear…

Rapid-setting assembly adhesive for internal and external use with a high…

ULTRAPLAN MAXI

Self-levelling, ultra quick-hardening smoothing compound for thicknesses from 3 to 40 mm. TECHNICAL DATA: Where to use: internal floors for ceramic, natural stone, resilient and wooden coatings.…

Self-levelling, ultra quick-hardening smoothing compound for thicknesses from 3…