Project De La Tour Hospital, Meyrin

De La Tour Hospital

Meyrin, Switzerland

Ref #: 7065

Category: PUBLIC BUILDINGS AND PLACES

Construction


Yard	internal rooms, corridors
Location	Meyrin, Switzerland
Subcategory	HOSPITAL
Built in	1970
Application	supply of products for the creation of substrates, laying of PVC coatings, vinyl and linoleum
Start and finish date	2016/2019
Application Type	Installation of floors
Client	de la Tour hospital
Contractor company	Gestron Services (Suisse) SA
Installer companies	Anhy SA e Realsport Goup
Architects	de Planta et Associés, Aris Serbetis Architecte; Tridimensions architectes SA
MAPEI Coordination	Marcel Maieron (Mapei Suisse SA)

Product used for the project

EPORIP TURBO

Two-component, quick-hardening polyester resin for monolithic sealing cracked screeds. TECHNICAL DATA: Consistency: comp. A: fluid paste; comp. B: fluid paste. Colours: comp. A: grey; comp. B: white.…

Two-component, quick-hardening polyester resin for monolithic sealing cracked…

MAPECEM PRONTO

Pre-blended, ready-to-use, quick-setting and drying (24 hours), controlled-shrinkage mortar for screeds. TECHNICAL DATA: Mixing ratio: 1 25 kg bags of MAPECEM PRONTO with approximately 2.2 litres of…

Pre-blended, ready-to-use, quick-setting and drying (24 hours),…

MAPECONTACT

Reinforced adhesive strip for laying profiles, base-boards, covings and resilient and textile coatings on steps. TECHNICAL DATA: Colour: – adhesive: transparent; – reinforcement: orange. Weight per…

Reinforced adhesive strip for laying profiles, base-boards, covings and…

MAPENET 150

Alkali-resistant glass fibre mesh (in compliance with the ETAG 004 guide) for reinforcing protective waterproofing layers, anti-fracture membranes and thermal insulation systems. TECHNICAL DATA:…

Alkali-resistant glass fibre mesh (in compliance with the ETAG 004 guide) for…

PRIMER MF

Two-component, solvent-free epoxy primer used as bonding promoter for products from the MAPEFLOOR range, for consolidating and waterproofing against residual damp on cementitious substrates and as…

Two-component, solvent-free epoxy primer used as bonding promoter for products…

ULTRABOND ECO 4 LVT

Fibre-reinforced LVT adhesive. Specifically developed for the installation of LVT floorings, it guarantees the highest performances in terms of adhesion and dimensional stability. TECHNICAL DATA:…

Fibre-reinforced LVT adhesive. Specifically developed for the installation of…

ULTRABOND ECO V4SP

Multi-purpose, acrylic adhesive in water dispersion with a long open time and very low emission level of volatile organic compounds (VOC), for laying rubber, PVC, vinyl, polyolephinic, linoleum and…

Multi-purpose, acrylic adhesive in water dispersion with a long open time and…

ULTRABOND MS RAPID

Rapid-setting assembly adhesive for internal and external use with a high sucker effect. TECHNICAL DATA: Viscosity: thixotropic paste. Open time: 5’. Initial tensile strength: 25 N. Final shear…

Rapid-setting assembly adhesive for internal and external use with a high…

ULTRAPLAN MAXI

Self-levelling, ultra quick-hardening smoothing compound for thicknesses from 3 to 40 mm. TECHNICAL DATA: Where to use: internal floors for ceramic, natural stone, resilient and wooden coatings.…

Self-levelling, ultra quick-hardening smoothing compound for thicknesses from 3…