Project Cipriani Condominium, Milano


Yard	façades restoration
Location	Milano, Italy
Subcategory	CONDOMINIUM
Built in	2012
Opened in	2012
Application	façades restoration and painting
Application Type	Concrete restoration systems
Contractor company	I.C.R.E.
Credits	Gianni Dal Magro

ADESILEX T SUPER

Adhesive for welding high-pressure PVC pipes. TECHNICAL DATA: Viscosity: fluid liquid. Final tensile strength: like the bonded PVC-pipe. Dry solids content: 35%. Colour: red. Application: brush.…

Adhesive for welding high-pressure PVC pipes. TECHNICAL DATA: Viscosity: fluid…

FUGOLASTIC

Polymer liquid admix for KERACOLOR FF, KERACOLOR GG and KERACOLOR SF. TECHNICAL DATA OF FUGOLASTIC + KERACOLOR: Pot life of mix: approx. 2 hours. Waiting time before finishing: 10-20 minutes. Set to…

Polymer liquid admix for KERACOLOR FF, KERACOLOR GG and KERACOLOR SF. TECHNICAL…

Pre-blended, high-performance polymer-modified cementitious mortar for grouting joints 4 to 15 mm wide. TECHNICAL DATA: Pot life of mix: approx. 2 hours. Waiting time before finishing: 10-20 minutes.…

Pre-blended, high-performance polymer-modified cementitious mortar for grouting…

MALECH

Water-based acrylic undercoat and bonding promoter with a smooth finish. TECHNICAL DATA: Consistency: fluid liquid. Colour: transparent. Density (EN ISO 2811-1) (g/cm³): approx. 1.01. Dry solids…

Water-based acrylic undercoat and bonding promoter with a smooth finish.…

MAPEBAND

Alkali-resistant rubber tape with felt for cementitious waterproofing systems and liquid sheaths. TECHNICAL DATA: In service temperature range: from -30°C to +60°C. Packaging: – 120 mmx50 m rolls; –…

Alkali-resistant rubber tape with felt for cementitious waterproofing systems…

Mapegrout Thixotropic

Fibre-reinforced, compensated-shrinkage mortar for repairing concrete. TECHNICAL DATA: Maximum dimension of aggregate: 2.5 mm. Mixing ratio: 100 parts of MAPEGROUT TISSOTROPICO with 15.5-16.5 parts…

Fibre-reinforced, compensated-shrinkage mortar for repairing concrete.…

MAPELASTIC

Two-component, flexible cementitious mortar for waterproofing balconies, terraces, bathrooms and swimming pools.

Two-component, flexible cementitious mortar for waterproofing balconies,…

MAPENET 150

Alkali-resistant glass fibre mesh (in compliance with the ETAG 004 guide) for reinforcing protective waterproofing layers, anti-fracture membranes and thermal insulation systems. TECHNICAL DATA:…

Alkali-resistant glass fibre mesh (in compliance with the ETAG 004 guide) for…

MAPETHERM AR1 GG

One-component, large-grained cementitious mortar for bonding and levelling insulation panels and for thermal insulation systems. TECHNICAL DATA: Consistency: powder. Colour: grey and white Density of…

One-component, large-grained cementitious mortar for bonding and levelling…

NIVOPLAN

Levelling mortar for interior and exterior walls and ceilings. Applications: Interior and exterior levelling "out-of-plumb" walls, rough or damaged renders, brick walls before laying ceramic tiles.…

Levelling mortar for interior and exterior walls and ceilings. Applications:…

PLANICRETE LATEX

Synthetic rubber latex to improve adhesion of cement mixes. TECHNICAL DATA: Consistency: fluid liquid. Dry solids content: 47%. Storage: 12 months. Consumption: – for adhesive slurry: 100-150 g/m²; –…

Synthetic rubber latex to improve adhesion of cement mixes. TECHNICAL DATA:…

Quarzolite Paint

Acrylic paint with micro-granular quartz with a smooth finish for long-lasting protection of internal and external surfaces. TECHNICAL DATA: Consistency: thick liquid. Colour: white or various…

Acrylic paint with micro-granular quartz with a smooth finish for long-lasting…

SILANCOLOR AC TONACHINO

Water-repellent, thick-layered acrylic-siloxane coating with high filling properties for internal and external surfaces. Available in the following granulometries: 1.2 mm. TECHNICAL DATA:…

Water-repellent, thick-layered acrylic-siloxane coating with high filling…

SILANCOLOR PRIMER

Transpirant siloxane undercoat with a smooth finish. TECHNICAL DATA: Consistency: fluid liquid. Colour: milky. Density (EN ISO 2811-1) (g/cm³): approx. 1.01. Dry solids content (EN ISO 3251) (%):…

Transpirant siloxane undercoat with a smooth finish. TECHNICAL DATA:…