Project Bari Ichthyic Centre, Bari

Bari Ichthyic Centre

Bari, Italy

Ref #: 5173

Category: PRODUCTION AND SERVICES

Construction


Yard	stockhouse
Location	Bari, Italy
Subcategory	DEPOT
Built in	2011
Opened in	2012
Application	waterproofing and ceramic installation
Application Type	Waterproofing systems
Client	Porto Santo Spirito srl
Contractor company	Edil Ciccone srl
Installer companies	Edil Ciccone srl
Architects	ing. Pasquale Rausa
MAPEI Distributor	Barili srl
Credits	Sorrenti; Colella
Project Manager	ing. Pasquale Rausa

Product used for the project

KERAFLEX MAXI S1

High-performance deformable cementitious adhesive with no vertical slip, extended open time and Low Dust technology for ceramic tiles, particularly recommended for laying large porcelain and natural…

High-performance deformable cementitious adhesive with no vertical slip,…

KERAPOXY

Two-component, high-performance, anti-acid epoxy mortar and adhesive with no vertical slip for laying and grouting ceramic tiles and stone material.

Two-component, high-performance, anti-acid epoxy mortar and adhesive with no…

KERAPOXY CLEANER

Special cleaning solution for epoxy grout, suitable for cleaning operations after completing laying work and for removing traces and stains of epoxy grout (such as KERAPOXY, KERAPOXY P, KERAPOXY…

Special cleaning solution for epoxy grout, suitable for cleaning operations…

LAMPOSILEX

Ultra quick-setting and hardening hydraulic binder for blocking seeping water. TECHNICAL DATA: Consistency: fine powder. Workability time at +20°C: approximately 1 minute. Storage: 12 months. Mixing…

Ultra quick-setting and hardening hydraulic binder for blocking seeping water.…

Fine-grained, fibre-reinforced, normal-setting thixotropic mortar for repairing concrete. TECHNICAL DATA: Maximum dimension of aggregate: 1 mm. Mixing ratio: 100 parts of MAPEGROUT 430 with 17.5-18.5…

Fine-grained, fibre-reinforced, normal-setting thixotropic mortar for repairing…

Mapegrout Hi-Flow

Fibre-reinforced, controlled-shrinkage mortar for repairing concrete. TECHNICAL DATA: Maximum dimension of aggregate: 2.5 mm. Mixing ratio: 100 parts of MAPEGROUT HI-FLOW with 13-14 parts of water…

Fibre-reinforced, controlled-shrinkage mortar for repairing concrete. TECHNICAL…

MAPELASTIC

Two-component, flexible cementitious mortar for waterproofing balconies, terraces, bathrooms and swimming pools.

Two-component, flexible cementitious mortar for waterproofing balconies,…

MAPELASTIC FOUNDATION

Two-component, flexible cementitious mortar for waterproofing concrete surfaces subject to negative and positive hydraulic lift. TECHNICAL DATA: Consistency: thixotropic. Mixing ratio: comp. A: comp.…

Two-component, flexible cementitious mortar for waterproofing concrete surfaces…

MAPENET 150

Alkali-resistant glass fibre mesh (in compliance with the ETAG 004 guide) for reinforcing protective waterproofing layers, anti-fracture membranes and thermal insulation systems. TECHNICAL DATA:…

Alkali-resistant glass fibre mesh (in compliance with the ETAG 004 guide) for…

MAPEPROOF

Bentonite waterproofing sheets for structures below ground level, suitable for both horizontal and vertical surfaces. TECHNICAL DATA: Lower layer of geo-textile fabric: polypropylene fabric, 140…

Bentonite waterproofing sheets for structures below ground level, suitable for…

MAPEPROOF SWELL

Hydro-expansive, rubber-based hydrophilic sealant paste in tubes, applied using an extrusion pistol. TECHNICAL DATA: Consistency: thixotropic paste. Solubility: non-soluble in water. Dry solids…

Hydro-expansive, rubber-based hydrophilic sealant paste in tubes, applied using…