Project Aquacity Poprad, Poprad


Yard	Floor/wall coverings
Location	Poprad, Slovakia
Subcategory	Spa
Built in	2008
Opened in	2008
Application	Ceramic tiles installation
Application Type	Floor/wall coverings
Contractor company	T-design, s.r.o.
Installer companies	INGSTEEL, s.r.o.
Architects	Ing. Arch. Pavel Kučera, Ing. Arch. Filip Rubáš
MAPEI Distributor	MAPEI SK, s.r.o.
Project Manager	ARCHSTUDIO, s.r.o. Brno

ADESILEX P10

High-performance, white cementitious adhesive with no vertical slip and extended open time for glass mosaic, ceramic and marble coatings (thickness of adhesive up to 5 mm). Conformity of Adesilex P10…

High-performance, white cementitious adhesive with no vertical slip and…

ADESILEX P9

High-performance cementitious adhesive with no vertical slip and extended open time for ceramic tiles and stone materials. The white version has very high white balance and excellent workability.

High-performance cementitious adhesive with no vertical slip and extended open…

IDROSTOP MASTIC

One-component adhesive for laying IDROSTOP. TECHNICAL DATA: Consistency: thixotropic paste. Dry solids content: 100%. Storage: 18 months. Application temperature range: from +5°C to +35°C. Dust dry:…

One-component adhesive for laying IDROSTOP. TECHNICAL DATA: Consistency:…

KERACOLOR FF

Pre-blended, high-performance, polymer-modified cementitious mortar with water-repellent DropEffect ® technology for grouting joints up to 6 mm wide. TECHNICAL DATA: Pot life of mix: approx. 2…

Pre-blended, high-performance, polymer-modified cementitious mortar with…

KERAFLEX

High-performance cementitious adhesive with no vertical slip and extended open time for ceramic and stone tiles.

High-performance cementitious adhesive with no vertical slip and extended open…

KERANET

Acid-based cleaning solution for ceramic tiles. Particularly recommended for eliminating lime efflorescence and for the final cleaning step of Tuscany terracotta. In powder (concentrated) or liquid…

Acid-based cleaning solution for ceramic tiles. Particularly recommended for…

MAPEBAND

Alkali-resistant rubber tape with felt for cementitious waterproofing systems and liquid sheaths. TECHNICAL DATA: In service temperature range: from -30°C to +60°C. Packaging: – 120 mmx50 m rolls; –…

Alkali-resistant rubber tape with felt for cementitious waterproofing systems…

MAPEGROUT THIXOTROPIC ZERO

Shrinkage-compensated fibre-reinforced mortar for concrete repair

This product replaces MAPEGROUT TISSOTROPICO

MAPESIL AC

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for movements up to 25%.

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for…

NIVOPLAN

Levelling mortar for interior and exterior walls and ceilings. Applications: Interior and exterior levelling "out-of-plumb" walls, rough or damaged renders, brick walls before laying ceramic tiles.…

Levelling mortar for interior and exterior walls and ceilings. Applications:…

NIVORAPID

Quick-drying, thixotropic, cementitious smoothing compound for thicknesses from 1 to 20 mm, including on vertical surfaces. TECHNICAL DATA: Where to use: internal floors and walls for ceramic,…

Quick-drying, thixotropic, cementitious smoothing compound for thicknesses from…

NOVOPLAN 21

Fast hardening self-levelling smoothing compound for thicknesses from 1 to 5 mm. Where to use: - Interior levelling of new or existing substrates to make them ready to receive resilient or textile…

Fast hardening self-levelling smoothing compound for thicknesses from 1 to 5…

PLANICRETE LATEX

Synthetic rubber latex to improve adhesion of cement mixes. TECHNICAL DATA: Consistency: fluid liquid. Dry solids content: 47%. Storage: 12 months. Consumption: – for adhesive slurry: 100-150 g/m²; –…

Synthetic rubber latex to improve adhesion of cement mixes. TECHNICAL DATA:…

PRIMER G

Synthetic resin primer in water dispersion with a very low content of volatile organic compounds (VOC). TECHNICAL DATA: Consistency: liquid. Colour: blue. Dilution rate: from 1:1 to 1: 3 with water…

Synthetic resin primer in water dispersion with a very low content of volatile…

TOPCEM PRONTO

Ready-to-use, normal-setting, controlled-shrinkage mortar with high thermal efficiency for quick-drying (4 days) screeds.

Ready-to-use, normal-setting, controlled-shrinkage mortar with high thermal…

ULTRACARE FUGA FRESCA

Polymeric paint to refresh the colour of the cementitious grout joints between tiles

Polymeric paint to refresh the colour of the cementitious grout joints between…

This product replaces FUGA FRESCA

ULTRACOLOR PLUS

High-performance, anti-efflorescence, quick-setting and drying polymer-modified mortar free from Portland cement with water-repellent DropEffect ® and mould-resistant BioBlock ® technology for…

High-performance, anti-efflorescence, quick-setting and drying polymer-modified…