Adesilex PG2 TG is a two-component product based on epoxy resins, selected fine-grain aggregates and special additives according to a formula developed in the MAPEI research laboratories.
Adesilex PG2 TG is a two-component product based on epoxy resins, selected…
Alkali-resistant glass fibre mesh suitable for reinforced skimming layers when repairing façades, or for the execution of MAPETHERM thermal insulation systems. TECHNICAL DATA: Composition: 100% glass…
Alkali-resistant glass fibre mesh suitable for reinforced skimming layers when…
Transpirant, coloured silicate undercoat with a smooth finish and good filling properties for internal and external surfaces, according to DIN 18363 Standards. TECHNICAL DATA: Consistency: thick…
Transpirant, coloured silicate undercoat with a smooth finish and good filling…
Water-repellent, coloured acrylic undercoat with a smooth finish and good filling properties for internal and external surfaces. TECHNICAL DATA: Consistency: thick liquid. Colour: white or various…
Water-repellent, coloured acrylic undercoat with a smooth finish and good…
MULTI-LAYERED SYSTEM MADE FROM ACRYLIC RESIN IN WATER DISPERSION COMBINED WITH GLASS FIBRE MESH FOR REFURBISHING PRO-GRADE INDOOR AND OUTDOOR TENNIS COURTS
MULTI-LAYERED SYSTEM MADE FROM ACRYLIC RESIN IN WATER DISPERSION COMBINED WITH…
Two-component, epoxy-polyurethane adhesive for resilient and textile flooring on internal and external absorbent and non-absorbent substrates. Specifically developed for the installation of rubber…
Two-component, epoxy-polyurethane adhesive for resilient and textile flooring…
A general purpose render for internal and external use. It is suitable for rendering and levelling internal and external masonry substrates, in thicknesses up to 15 mm per layer, up to an overall…
A general purpose render for internal and external use. It is suitable for…
Two-component epoxy binder used for preparing trowelled mortar with a damp earth consistency for industrial floors. TECHNICAL DATA: Mixing ratio: comp. A: comp. B = 100 : 50. Colour of mix:…
Two-component epoxy binder used for preparing trowelled mortar with a damp…
Fast hardening self-levelling smoothing compound for thicknesses from 1 to 10 mm. TECHNICAL DATA: Consistency: Fine powder Colour: Grey Bulk Density (g/m2): 1,300 Dry Solids Content (%): 100 Mixing…
Fast hardening self-levelling smoothing compound for thicknesses from 1 to 10…
Two-component, anti-corrosion cementitious mortar for steel reinforcement rods. TECHNICAL DATA: Maximum dimension of aggregate: 0.5 mm. Mixing ratio: comp. A : comp. B = 3 : 1. Pot life of mix:…
Two-component, anti-corrosion cementitious mortar for steel reinforcement rods.…
Polymer liquid admix for KERACOLOR FF, KERACOLOR GG and KERACOLOR SF. TECHNICAL DATA OF FUGOLASTIC + KERACOLOR: Pot life of mix: approx. 2 hours. Waiting time before finishing: 10-20 minutes. Set to…
Polymer liquid admix for KERACOLOR FF, KERACOLOR GG and KERACOLOR SF. TECHNICAL…
Natural sodium bentonite in powder form for localised strengthening of waterproofing layers made using MAPEPROOF bentonite sheets. TECHNICAL DATA: Montmorillonite (XRD): > 95%. Free swelling (ASTM D…
Natural sodium bentonite in powder form for localised strengthening of…
Thixotropic detergent for cleaning surfaces damaged by graffiti. TECHNICAL DATA: Consistency: liquid gel. Colour: straw yellow. Density (EN ISO 2811-1) (g/cm³): approx. 0.85. Application: brush.…
Thixotropic detergent for cleaning surfaces damaged by graffiti. TECHNICAL…
