Project Vittorio Emanuele II Arcade, Milano

Vittorio Emanuele II Arcade

Milano, Italy

Ref #: 4893

Category: PUBLIC BUILDINGS AND PLACES

Construction


Yard	Monumental/commercial arcade
Location	Milano, Italy
Subcategory	PEDESTRIAN AREA
Built in	2011
Opened in	2012
Application	historical mosaics restoration
Application Type	Installation of floors
Client	Comune di Milano, Settore Cultura e Beni Comunali Diversi
Contractor company	Impresa Trivella
Installer companies	Trivella SpA, Cinisello Balsamo (MI)
Specialists involved	arch. Pasquale Francesco Mariani Orlandi; RUP: arch. Silvia Volpi; Sovrintendenza: Libero Corrieri, Alberto Artioli; Direzione operativa: Simone Ascione, Vittorio Alfieri (Comune di Milano)
MAPEI Distributor	Centro Edile Antonini (Milano), Gruppo BEA (Milano)
Credits	Gianni Dal Magro
Project Manager	Paolo Maggi

Product used for the project

ADESILEX PG1 RAPIDO

Two-component, ultra rapid-setting thixotropic epoxy adhesive for structural bonding

Two-component, ultra rapid-setting thixotropic epoxy adhesive for structural…

ELASTORAPID

Two-component, high-performance, highly-deformable, quick-setting and drying cementitious adhesive with no vertical slip and extended open time for ceramic tiles and stone material.

Two-component, high-performance, highly-deformable, quick-setting and drying…

EPORIP

Two-component solvent-free epoxy adhesive, for repairing cracks in screeds. Suitable as a primer for tiling metal surfaces. Where to use: Monolithic construction joints between fresh and hardened…

Two-component solvent-free epoxy adhesive, for repairing cracks in screeds.…

KERALASTIC T

White thixotropic version of KERALASTIC, particularly suitable for vertical applications. COVERAGE: approx. 2.5-5 kg/m2.

White thixotropic version of KERALASTIC, particularly suitable for vertical…

KERAPOXY

Two-component, high-performance, anti-acid epoxy mortar and adhesive with no vertical slip for laying and grouting ceramic tiles and stone material.

Two-component, high-performance, anti-acid epoxy mortar and adhesive with no…

LATEX PLUS

TECHNICAL DATA OF LATEX PLUS + KERAQUICK S1: Pot life of mix: 45 minutes. Open time: 20 minutes. Waiting time before grouting: 2-3 hours. Set to light foot traffic: approx. 2-3 hours. Ready for use:…

TECHNICAL DATA OF LATEX PLUS + KERAQUICK S1: Pot life of mix: 45 minutes. Open…

MAPECEM PRONTO

Pre-blended, ready to use, fast-setting and drying hydraulic binder for shrinkage compensated screeds. For the formation of bonded, un-bonded, floating and heated screeds on existing and new slabs…

Pre-blended, ready to use, fast-setting and drying hydraulic binder for…

MAPEGROUT SV FIBER

TECHNICAL DATA: Maximum dimension of aggregate: 2.5 mm. Mixing ratio: 100 parts of MAPEGROUT SV FIBER with 13.5-14.5 parts of water. Pot life of mix: approximately 20 minutes (at +20°C). Minimum…

TECHNICAL DATA: Maximum dimension of aggregate: 2.5 mm. Mixing ratio: 100 parts…

Medium strength (40 MPa) thixotropic mortar for the repair of concrete. Use Mapegrout T40 to repair damaged concrete surfaces such as balconies and corners of columns and beams. Mapegrout T40 is also…

Medium strength (40 MPa) thixotropic mortar for the repair of concrete. Use…

MAPESIL AC

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for movements up to 25%.

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for…

MAPESIL LM

Neutral silicone mould-resistant sealant with BioBlock ® technology for stone for movements up to 25%.

Neutral silicone mould-resistant sealant with BioBlock ® technology for stone…

PRIMER 3296

TECHNICAL DATA: Consistency: liquid. Colour: opaline. Dilution ratio: as is, 1: 1 or 1:2 according to the absorption of the substrate. Drying time: 1-5 days. Waiting time before laying with vinyl…

TECHNICAL DATA: Consistency: liquid. Colour: opaline. Dilution ratio: as is, 1:…

PRIMER G

TECHNICAL DATA: Consistency: liquid. Colour: blue. Dilution rate: from 1:1 to 1: 3 with water according to the absorption of the substrate. Drying time: 2 hours according to the dilution rate and the…

TECHNICAL DATA: Consistency: liquid. Colour: blue. Dilution rate: from 1:1 to…